Mattia Dongili wrote:
tags 311979 + moreinfo
stop
Hi,
On Sat, Jun 04, 2005 at 09:34:12AM -0600, Anthony Roberts wrote:
Package: cpufrequtils
Version: 0.2-1
Severity: important
I have a Winchester core Athlon64 3000+ that is capable of changing the
frequency. I used this functionality as it made my CPU run cooler and
made my system quieter, however it is not necessary to the operation of
my system as it would be with a laptop. After a recent kernel update,
cpufreq-set was unable to set my kernel frequency.
well from a quick diagnosis I'd say it's a kernel issue (same
cpufrequtils but different kernel...) :)
Anyway could you provide the output of cpufreq-info and verify that the
kernel recognize your processor correctly? (try to track differences in
the output of the kernel when loading cpufreq modules and also try to
set frequencies manually and see if it works)
thanks a lot
No problem. :)
I know it did recognize it before the update, as it worked. From looking
at the dmesg output, it looks like it is still recognized correctly.
$ cpufreq-info
cpufrequtils 0.2: cpufreq-info (C) Dominik Brodowski 2004
Report errors and bugs to [EMAIL PROTECTED], please.
analyzing CPU 0:
driver: powernow-k8
hardware limits: 1000 MHz - 1.80 GHz
available frequency steps: 1000 MHz, 1.80 GHz
available cpufreq governors: powersave, userspace, performance
current policy: frequency should be within 1000 MHz and 1.80 GHz.
The governor "userspace" may decide which speed to use
within this range.
current CPU frequency is 1.80 GHz (asserted by call to hardware).
$ dmesg
: ioport range 0x290-0x297 has been reserved
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0b: ioport range 0xcf8-0xcff could not be reserved
pnp: 00:0b: ioport range 0x680-0x6ff has been reserved
PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 177
number of MP IRQ sources: 15.
number of IO-APIC #1 registers: 24.
testing the IO APIC.......................
IO APIC #1......
.... register #00: 01000000
....... : physical APIC id: 01
....... : Delivery Type: 0
....... : LTS : 0
.... register #01: 00178003
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0003
.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 001 01 0 0 0 0 0 1 1 51
06 001 01 0 0 0 0 0 1 1 59
07 001 01 0 0 0 0 0 1 1 61
08 001 01 0 0 0 0 0 1 1 69
09 001 01 0 1 0 1 0 1 1 71
0a 001 01 0 0 0 0 0 1 1 79
0b 001 01 0 0 0 0 0 1 1 81
0c 001 01 0 0 0 0 0 1 1 89
0d 001 01 0 0 0 0 0 1 1 91
0e 001 01 0 0 0 0 0 1 1 99
0f 001 01 0 0 0 0 0 1 1 A1
10 001 01 1 1 0 1 0 1 1 B1
11 001 01 1 1 0 1 0 1 1 A9
12 000 00 1 0 0 0 0 0 0 00
13 000 00 1 0 0 0 0 0 0 00
14 001 01 1 1 0 1 0 1 1 B9
15 001 01 1 1 0 1 0 1 1 C1
16 001 01 1 1 0 1 0 1 1 C9
17 000 00 1 0 0 0 0 0 0 00
Using vector-based indexing
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ5 -> 0:5
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ10 -> 0:10
IRQ11 -> 0:11
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ177 -> 0:16
IRQ169 -> 0:17
IRQ185 -> 0:20
IRQ193 -> 0:21
IRQ201 -> 0:22
.................................... done.
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
Initializing Cryptographic API
PCI: Via IRQ fixup for 0000:00:10.3, from 10 to 1
PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 1
PCI: Via IRQ fixup for 0000:00:10.1, from 11 to 1
PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 1
PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 9
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
ACPI: (supports S0 S1 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 5016 blocks [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 148k freed
vesafb: probe of vesafb0 failed with error -6
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.02 loaded.
sata_via version 0.20
ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 185
sata_via(0000:00:0f.0): routed to hard irq line 10
ata1: SATA max UDMA/133 cmd 0xD000 ctl 0xC802 bmdma 0xB800 irq 185
ata2: SATA max UDMA/133 cmd 0xC400 ctl 0xC002 bmdma 0xB808 irq 185
ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003
88:407f
ata1: dev 0 ATA, max UDMA/133, 156299375 sectors: lba48
ata1: dev 0 configured for UDMA/133
scsi0 : sata_via
ata2: no device found (phy stat 00000000)
scsi1 : sata_via
Using anticipatory io scheduler
Vendor: ATA Model: ST380013AS Rev: 3.18
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156299375 512-byte hdwr sectors (80025 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4
p4: <bsd: p5 p6 p7 p8 p9 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: HL-DT-ST GCE-8320B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 169
sk98lin: Network Device Driver v6.23
(C)Copyright 1999-2004 Marvell(R).
ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 169
sk98lin: Asus mainboard with buggy VPD? Correcting data.
eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
PrefPort:A RlmtMode:Check Link State
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 177
e1000: Ignoring new-style parameters in presence of obsolete ones
Intel(R) PRO/1000 Network Driver - version 5.2.52-k4
Copyright (c) 1999-2004 Intel Corporation.
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 16 (level, low) -> IRQ 177
e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 185
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
VP_IDE: port 0x01f0 already claimed by ide0
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 193
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller
uhci_hcd 0000:00:10.0: irq 193, io base 0000d400
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 193
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller(#2)
uhci_hcd 0000:00:10.1: irq 193, io base 0000d800
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 193
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller(#3)
uhci_hcd 0000:00:10.2: irq 193, io base 0000e000
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 193
uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller(#4)
uhci_hcd 0000:00:10.3: irq 193, io base 0000e400
uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 193
ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.4: irq 193, pci mem f885b000
ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:10.4: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
ts: Compaq touchscreen protocol output
mice: PS/2 mouse device common for all mice
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected AGP bridge 0
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 64M @ 0xf4000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Real Time Clock Driver v1.12
input: PC Speaker
inserting floppy driver for 2.6.8-2-686
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
VFS: Can't find ext3 filesystem on dev sda3.
VFS: Can't find ext2 filesystem on dev sda3.
ReiserFS: sda3: found reiserfs format "3.6" with standard journal
usb 1-1: new low speed USB device using address 2
input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with
IntelliEye(TM)] on usb-0000:00:10.0-1
ReiserFS: sda3: using ordered data mode
ReiserFS: sda3: journal params: device sda3, size 8192, journal first
block 18,max trans len 1024, max batch 900, max commit age 30, max trans
age 30
ReiserFS: sda3: checking transaction log (sda3)
ReiserFS: sda3: Using r5 hash to sort names
Adding 4393768k swap on /dev/sda2. Priority:-1 extents:1
ACPI: Processor [CPU1] (supports C1)
powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09b)
powernow-k8: 0 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
powernow-k8: cpu_init done, current fid 0xa, vid 0x4
powernow-k8: vid trans failed, vid 0x3, curr 0x4
powernow-k8: transition frequency failed
powernow-k8: vid trans failed, vid 0x3, curr 0x4
powernow-k8: transition frequency failed
Capability LSM initialized
via82xx: Assuming DXS channels with 48k fixed sample rate.
Please try dxs_support=1 or dxs_support=4 option
and report if it works on your machine.
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 201
PCI: Setting latency timer of device 0000:00:11.5 to 64
e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
NET: Registered protocol family 17
e1000: eth1: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
nfs warning: mount version older than kernel
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0300140(lo)
IPv6 over IPv4 tunneling driver
eth1: no IPv6 routers present
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
RPC: call_verify: program 100021, version 4 unsupported by server
192.168.1.1
powernow-k8: vid trans failed, vid 0x3, curr 0x4
powernow-k8: transition frequency failed
powernow-k8: vid trans failed, vid 0x3, curr 0x4
powernow-k8: transition frequency failed
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
