> After attaching a device, entering your passphrase when prompted, and
> observing that it has not been mounted, run 'lshal' and attach the
> output to this bug report. We're looking for encrypted volumes that HAL
> thinks are of size 0.
Here you are.
Packages versions first:
udev 0.114-2
hal 0.5.11-2
nautilus 2.22.4-1
gnome-mount 0.7-2
Linux kernel is 2.6.25.
1) Device plugged in:
$ dmesg
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
usb 1-7.4: New USB device found, idVendor=04fc, idProduct=0c15
usb 1-7.4: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 1-7.4: Product: USB to Serial-ATA bridge
usb 1-7.4: Manufacturer: Sunplus Technology Inc.
usb 1-7.4: SerialNumber: MAXTOR STM 9QG4MWXL
usb-storage: device scan complete
scsi 7:0:0:0: Direct-Access MAXTOR S TM3500630AS PQ: 0
ANSI: 2
sd 7:0:0:0: [sdf] 976773168 512-byte hardware sectors (500108 MB)
sd 7:0:0:0: [sdf] Write Protect is off
sd 7:0:0:0: [sdf] Mode Sense: 38 00 00 00
sd 7:0:0:0: [sdf] Assuming drive cache: write through
sd 7:0:0:0: [sdf] 976773168 512-byte hardware sectors (500108 MB)
sd 7:0:0:0: [sdf] Write Protect is off
sd 7:0:0:0: [sdf] Mode Sense: 38 00 00 00
sd 7:0:0:0: [sdf] Assuming drive cache: write through
sdf: unknown partition table
sd 7:0:0:0: [sdf] Attached SCSI disk
2) LUKS password entered and volume opened:
$ ls -la /dev/mapper/
...
crw-rw---- 1 root root 10, 61 13. čec 10.09 control
brw-rw---- 1 root disk 252, 0 13. čec 16.39
luks_crypto_f3518263-2245-4ffc-b59e-f730a01f164e
3) Encrypted volume not mounted, lshal output:
$ lshal
...
udi =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL_0'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_424_2504_noserial'
(string)
info.product = 'USB to Serial-ATA bridge' (string)
info.subsystem = 'usb_device' (string)
info.udi =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL_0'
(string)
info.vendor = 'Sunplus Technology Co., Ltd' (string)
linux.device_file = '/dev/bus/usb/001/008' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-7/1-7.4'
(string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration = 'Bulk Only Configuration' (string)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 60418 (0xec02) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 8 (0x8) (int)
usb_device.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:02.1/usb1/1-7/1-7.4' (string)
usb_device.max_power = 2 (0x2) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'USB to Serial-ATA bridge' (string)
usb_device.product_id = 3093 (0xc15) (int)
usb_device.serial = 'MAXTOR STM 9QG4MWXL' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Sunplus Technology Co., Ltd' (string)
usb_device.vendor_id = 1276 (0x4fc) (int)
usb_device.version = 2.0 (2) (double)
udi =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL_0_usbraw'
info.capabilities = {'usbraw'} (string list)
info.category = 'usbraw' (string)
info.parent =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL_0'
(string)
info.product = 'USB Raw Device Access' (string)
info.subsystem = 'usb_device' (string)
info.udi =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL_0_usbraw'
(string)
linux.device_file = '/dev/bus/usb/001/008' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb_device' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:02.1/usb1/1-7/1-7.4/usb_device/usbdev1.8'
(string)
usbraw.device = '/dev/bus/usb/001/008' (string)
udi =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL_0_if0'
info.linux.driver = 'usb-storage' (string)
info.parent =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL_0'
(string)
info.product = 'USB Mass Storage Interface' (string)
info.subsystem = 'usb' (string)
info.udi =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL_0_if0'
(string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:02.1/usb1/1-7/1-7.4/1-7.4:1.0' (string)
usb.bus_number = 1 (0x1) (int)
usb.can_wake_up = false (bool)
usb.configuration = 'Bulk Only Configuration' (string)
usb.configuration_value = 1 (0x1) (int)
usb.device_class = 0 (0x0) (int)
usb.device_protocol = 0 (0x0) (int)
usb.device_revision_bcd = 60418 (0xec02) (int)
usb.device_subclass = 0 (0x0) (int)
usb.interface.class = 8 (0x8) (int)
usb.interface.description = 'Bulk Only Interface' (string)
usb.interface.number = 0 (0x0) (int)
usb.interface.protocol = 80 (0x50) (int)
usb.interface.subclass = 6 (0x6) (int)
usb.is_self_powered = true (bool)
usb.linux.device_number = 8 (0x8) (int)
usb.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:02.1/usb1/1-7/1-7.4/1-7.4:1.0' (string)
usb.max_power = 2 (0x2) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Mass Storage Interface' (string)
usb.product_id = 3093 (0xc15) (int)
usb.serial = 'MAXTOR STM 9QG4MWXL' (string)
usb.speed = 480.0 (480) (double)
usb.vendor = 'Sunplus Technology Co., Ltd' (string)
usb.vendor_id = 1276 (0x4fc) (int)
usb.version = 2.0 (2) (double)
udi =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL_0_if0_scsi_host'
info.capabilities = {'scsi_host'} (string list)
info.category = 'scsi_host' (string)
info.parent =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL_0_if0'
(string)
info.product = 'SCSI Host Adapter' (string)
info.subsystem = 'scsi_host' (string)
info.udi =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL_0_if0_scsi_host'
(string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi_host' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:02.1/usb1/1-7/1-7.4/1-7.4:1.0/host7' (string)
scsi_host.host = 7 (0x7) (int)
udi =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL_0_if0_scsi_host_scsi_device_lun0'
info.linux.driver = 'sd' (string)
info.parent =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL_0_if0_scsi_host'
(string)
info.product = 'SCSI Device' (string)
info.subsystem = 'scsi' (string)
info.udi =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL_0_if0_scsi_host_scsi_device_lun0'
(string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'scsi' (string)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:02.1/usb1/1-7/1-7.4/1-7.4:1.0/host7/target7:0:0/7:0:0:0'
(string)
scsi.bus = 0 (0x0) (int)
scsi.host = 7 (0x7) (int)
scsi.lun = 0 (0x0) (int)
scsi.model = 'TM3500630AS' (string)
scsi.target = 0 (0x0) (int)
scsi.type = 'disk' (string)
scsi.vendor = 'MAXTOR S' (string)
udi =
'/org/freedesktop/Hal/devices/storage_serial_MAXTOR_S_TM3500630AS_MAXTOR_STM_9QG4MWXL_0_0'
block.device = '/dev/sdf' (string)
block.is_volume = false (bool)
block.major = 8 (0x8) (int)
block.minor = 80 (0x50) (int)
block.storage_device =
'/org/freedesktop/Hal/devices/storage_serial_MAXTOR_S_TM3500630AS_MAXTOR_STM_9QG4MWXL_0_0'
(string)
info.capabilities = {'storage', 'block'} (string list)
info.category = 'storage' (string)
info.parent =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL_0_if0_scsi_host_scsi_device_lun0'
(string)
info.product = 'TM3500630AS' (string)
info.udi =
'/org/freedesktop/Hal/devices/storage_serial_MAXTOR_S_TM3500630AS_MAXTOR_STM_9QG4MWXL_0_0'
(string)
info.vendor = 'MAXTOR S' (string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:02.1/usb1/1-7/1-7.4/1-7.4:1.0/host7/target7:0:0/7:0:0:0/block/sdf'
(string)
storage.automount_enabled_hint = true (bool)
storage.bus = 'usb' (string)
storage.drive_type = 'disk' (string)
storage.firmware_version = 'ec02' (string)
storage.hotpluggable = true (bool)
storage.lun = 0 (0x0) (int)
storage.media_check_enabled = false (bool)
storage.model = 'TM3500630AS' (string)
storage.no_partitions_hint = false (bool)
storage.originating_device =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL_0_if0'
(string)
storage.partitioning_scheme = 'none' (string)
storage.removable = false (bool)
storage.removable.media_available = true (bool)
storage.removable.media_size = 500107862016 (0x7470c06000) (uint64)
storage.requires_eject = false (bool)
storage.serial = 'MAXTOR_S_TM3500630AS_MAXTOR_STM_9QG4MWXL-0:0' (string)
storage.size = 500107862016 (0x7470c06000) (uint64)
storage.vendor = 'MAXTOR S' (string)
udi =
'/org/freedesktop/Hal/devices/volume_uuid_f3518263_2245_4ffc_b59e_f730a01f164e'
block.device = '/dev/sdf' (string)
block.is_volume = true (bool)
block.major = 8 (0x8) (int)
block.minor = 80 (0x50) (int)
block.storage_device =
'/org/freedesktop/Hal/devices/storage_serial_MAXTOR_S_TM3500630AS_MAXTOR_STM_9QG4MWXL_0_0'
(string)
info.callouts.remove = {'hal-luks-remove'} (string list)
info.capabilities = {'volume', 'block'} (string list)
info.category = 'volume' (string)
info.interfaces = {'org.freedesktop.Hal.Device.Volume.Crypto'} (string list)
info.parent =
'/org/freedesktop/Hal/devices/storage_serial_MAXTOR_S_TM3500630AS_MAXTOR_STM_9QG4MWXL_0_0'
(string)
info.product = 'Volume (crypto_LUKS)' (string)
info.udi =
'/org/freedesktop/Hal/devices/volume_uuid_f3518263_2245_4ffc_b59e_f730a01f164e'
(string)
linux.hotplug_type = 3 (0x3) (int)
linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:02.1/usb1/1-7/1-7.4/1-7.4:1.0/host7/target7:0:0/7:0:0:0/block/sdf/fakevolume'
(string)
org.freedesktop.Hal.Device.Volume.Crypto.method_argnames = {'passphrase', ''}
(string list)
org.freedesktop.Hal.Device.Volume.Crypto.method_execpaths =
{'hal-luks-setup', 'hal-luks-teardown'} (string list)
org.freedesktop.Hal.Device.Volume.Crypto.method_names = {'Setup', 'Teardown'}
(string list)
org.freedesktop.Hal.Device.Volume.Crypto.method_signatures = {'s', ''}
(string list)
storage.model = '' (string)
volume.block_size = 512 (0x200) (int)
volume.fstype = 'crypto_LUKS' (string)
volume.fsusage = 'crypto' (string)
volume.fsversion = '' (string)
volume.is_disc = false (bool)
volume.is_mounted = false (bool)
volume.is_mounted_read_only = false (bool)
volume.is_partition = false (bool)
volume.label = '' (string)
volume.linux.is_device_mapper = false (bool)
volume.mount_point = '' (string)
volume.num_blocks = 976773168 (0x3a386030) (int)
volume.size = 500107862016 (0x7470c06000) (uint64)
volume.uuid = 'f3518263-2245-4ffc-b59e-f730a01f164e' (string)
udi =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL'
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_424_2504_noserial'
(string)
info.product = 'USB to Serial-ATA bridge' (string)
info.subsystem = 'usb_device' (string)
info.udi =
'/org/freedesktop/Hal/devices/usb_device_4fc_c15_MAXTOR_STM____________9QG4MWXL'
(string)
info.vendor = 'Sunplus Technology Co., Ltd' (string)
linux.device_file = '/dev/bus/usb/001/007' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:02.1/usb1/1-7/1-7.4'
(string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = false (bool)
usb_device.configuration = 'Bulk Only Configuration' (string)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 60418 (0xec02) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 7 (0x7) (int)
usb_device.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:02.1/usb1/1-7/1-7.4' (string)
usb_device.max_power = 2 (0x2) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'USB to Serial-ATA bridge' (string)
usb_device.product_id = 3093 (0xc15) (int)
usb_device.serial = 'MAXTOR STM 9QG4MWXL' (string)
usb_device.speed = 480.0 (480) (double)
usb_device.vendor = 'Sunplus Technology Co., Ltd' (string)
usb_device.vendor_id = 1276 (0x4fc) (int)
usb_device.version = 2.0 (2) (double)
...
Vit
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
