Op 11-07-2008 om 12:55 schreef Frans Pop: > > Suggest you start by commenting out the settings for: > - partman/choose_partition > - partman/confirm > > That will allow you to see what the actual configuration that was created > looks like. Please find out *what* is wrong and *why*.
The file example-preseed.txt from Alioth specifies SCSI or SATA disk, but the installed system has an IDE disk. --- a/manual/example-preseed.txt +++ b/manual/example-preseed.txt @@ -81,13 +81,10 @@ d-i clock-setup/ntp boolean true #d-i partman-auto/init_automatically_partition \ # select Guided - use the largest continuous free space -# Alternatively, you can specify a disk to partition. The device name must -# be given in traditional non-devfs format. +# Specify a disk to partition. +# Required when there are more disks then just one. # For example, to use the first SCSI/SATA hard disk: -d-i partman-auto/disk string /dev/sda -# Note: If you want to use whatever disk is available, no matter -# what its device name, comment the line above out. This will only work if -# the system only has one disk. +#d-i partman-auto/disk string /dev/sda # In addition, you'll need to specify the method to use. # The presently available methods are: "regular", "lvm" and "crypto" d-i partman-auto/method string lvm That patch got me past the 'No root file system' error. Cheers Geert Stappers -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
