Le samedi 07 juin 2008 à 16:13 +0100, Sjoerd Simons a écrit : > On Mon, Apr 28, 2008 at 11:28:12PM +0200, Alain Cabiran wrote: > > Hello, after upgrading to lenny, i found many read/write reg > > errors in my logs, and mplayer and kaffeine were unable to > > tune channels. > > > > Running amsn logs error of loading firmware. if i asked > > mplayer to play analog tv channel, dvb became accessible > > but unstable. > > > > stopping hal and reloading drivers made it work. but > > errors came immediately when starting hal. > > > > i compiled hal 0.5.10 and using it now, everything works fine. > > > > i had these problem with kernel 2.6.23.17 that's why i upgraded to 2.6.25 so > > Since the 0.5.11 RC versions of hal it includes a prober to query some caps of > v4l devices. Using the standard linux ioctl's. I wonder if that's causing your > problem. Can you install ivtv-utils and run v4l2-ctl -D on your v4l device ? I > wonder if that gives you the same problem > > Sjoerd
Hello, i downgraded kernel to 2.6.23.17 since my report (problems only related to nvidia driver). i tried "v4l2-ctl -D" on the two devices provided (/dev/vide0 and /dev/video1) by the card but i got no error messages. i had to use commands like "v4l2-ctl -s SECAM" to have writereg errors but i already know that this is not supported with 2.6.23.X kernels. dvb works fine after theses calls. I also noticed that "firmware loading successfull" message did not appear correctly when i used hal 0.5.11 rc2. maybe hal prevent the firmware to be loaded... i just tried hal to 0.5.11-1 and same problem occurs. I next stopped hal, unloaded cx88XX drivers, reloaded drivers, downgraded hal (restarted by aptitude), dvb (Hauppauge HVR 1300) works again. regards Alain Cabiran -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
