reassign 481693 libacr38u
thanks
Gérard Largepret a écrit :
Package: pcscd
Version: 1.4.100-3
Severity: important
*** Please type your report below this line ***
Bonjour,
I cannot read the content of an belgian electronic identity card
inserted in a acr 38 reader.
The reading application (beidgui) reports that there is no card in the
reader.
The reader and card are new and working on a another computer running
another operating system.
If I take a look in the /var/log/syslog file, I see the following:
+++ When plugin reader cable in usb port +++
May 17 23:53:28 max kernel: usb 1-5: new full speed USB device using
ohci_hcd and address 9
May 17 23:53:28 max kernel: usb 1-5: configuration #1 chosen from 1 choice
May 17 23:53:28 max pcscd: hotplug_libhal.c:341:HPAddDevice() Adding USB
device: usb_device_72f_9000_noserial_6_if0
May 17 23:53:29 max pcscd: readerfactory.c:1130:RFInitializeReader()
Attempting startup of ACS ACR38U 00 00 using
/usr/lib/pcsc/drivers/ACR38UDriver.bundle/Contents/Linux/ACR38UDriver.so
May 17 23:53:29 max pcscd: readerfactory.c:963:RFBindFunctions() Loading
IFD Handler 2.0
May 17 23:53:29 max kernel: usb 1-5: usbfs: process 11180 (pcscd) did
not claim interface 0 before use
+++ When inserting card in driver +++
May 17 23:54:23 max pcscd: eventhandler.c:437:EHStatusHandlerThread()
Card inserted into ACS ACR38U 00 00
May 17 23:54:23 max pcscd: eventhandler.c:451:EHStatusHandlerThread()
Error powering up card.
+++ When removing the card +++
May 17 23:54:33 max pcscd: eventhandler.c:364:EHStatusHandlerThread()
Card Removed From ACS ACR38U 00 00
+++ when unpluging the reader +++
May 17 23:54:42 max kernel: usb 1-5: USB disconnect, address 9
May 17 23:54:42 max pcscd: hotplug_libhal.c:422:HPRemoveDevice()
Removing USB device[0]: usb_device_72f_9000_noserial_6_if0
May 17 23:54:42 max pcscd: eventhandler.c:120:EHDestroyEventHandler()
Stomping thread.
May 17 23:54:42 max pcscd: eventhandler.c:145:EHDestroyEventHandler()
Thread stomped.
May 17 23:54:42 max pcscd: readerfactory.c:1181:RFUnInitializeReader()
Attempting shutdown of ACS ACR38U 00 00.
May 17 23:54:42 max pcscd: readerfactory.c:1042:RFUnloadReader()
Unloading reader driver.
+++ when I ask the beidgui to read the content of the card +++
May 18 00:24:38 max pcscd: winscard.c:363:SCardConnect() Card Not Powered
I tried the reader and card on a another computer running another
operating system and there it works.
The brand of the smart card reader is ACS. The model is ACR38U-CFC-BLI.
see http://www.belgeid.be/
I use the reader driver provided by debian : libacr38u &
libacr38ucontrol0 version 1.7.9-3
I also tried the reader driver provided by the manufacturer of the
reader : (fedora rpm) acr38udriver version 1.8.0-2
In this case I see in the syslog :
May 17 22:56:05 max pcscd: hotplug_libhal.c:341:HPAddDevice() Adding USB
device: usb_device_72f_9000_noserial_5_if0
May 17 22:56:06 max pcscd: readerfactory.c:1130:RFInitializeReader()
Attempting startup of ACS ACR38U 00 00 using
/usr/lib/pcsc/drivers/ACR38UDriver.bundle/Contents/Linux/ACR38UDriver
May 17 22:56:06 max pcscd: readerfactory.c:997:RFBindFunctions() Loading
IFD Handler 3.0
when pluging the reader.
The version of the card related software: beid-tools, beidgui, libbeid2
& libbeidlibopensc2 is 2.6.0-3.1
I'm not sure at all that the bug is located at your side because I do
not clearly understand the software stack between the hardware and the
me. But the only "error" information i see comes from pcscd.
I hope I give you enough information to begin to investigate where this
issue could be located.
Thanks in advance.
The problem is on the smart card reader driver side. I reassigned this
bug to the ACR 38 driver packages.
I also note that a newer version of the driver (1.8.0) is available on
ACR web site (at least the binary for Fedora 7).
Regards,
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
