NOO module is missing.
i have looked already

On 5/24/05, Christian Perrier <[EMAIL PROTECTED]> wrote:
> Forwarding this to the bug log. Bozhan, please write to
> [EMAIL PROTECTED] rather than privately, if possible.
> 
> When you are in the installer, whhen the message about not finding a
> HD appears, have you tried to switch to VT2 and then use "modprobe
> dc395"? Then re-switch to VT1 and try to continue.
> 
> ----- Forwarded message from Bozhan Boiadzhiev <[EMAIL PROTECTED]> -----
> 
> Date: Tue, 24 May 2005 16:00:44 +0300
> From: Bozhan Boiadzhiev <[EMAIL PROTECTED]>
> Reply-To: Bozhan Boiadzhiev <[EMAIL PROTECTED]>
> To: Christian Perrier <[EMAIL PROTECTED]>
> Subject: Re: Bug#310472: debian-installer: standart kernel 2.6 have dc359 
> module but there isn't such module for linux26
> 
> that is all about
> i find this module in standart kernel so i decide to ask is it posible
> to be included in
> installer ... i didn't find where to ask and filled this bug.
> sorry for typo in subject it is dc395 not dc359.
> in kernel before 2.6 this module missing and can be compled with patch but
>  module is aviable for 2.6 kernels.
> there isn't much inforation in internet about this adapter. and
> specialy for running this adapter in debian.
> this is the main reason that i was forced to use mandrake before 2 years.
> but now i want to use debian.
> module name in madrake is dc395x_trm, but in 2.6 kernel is dc395x
> 
> this is discover-data
> 
> 1de1 Tekram Technology Co.,Ltd.
>         1de10391        scsi    dc3x5   TRM-S1040
>         1de12020        scsi    tmscsim DC-390
>         1de1690c        unknown unknown 690c
>         1de1dc29        unknown unknown DC290
> 
> and may be this is the problem.
> Module exist in debian 2.6 kernels.
> 
> On 5/24/05, Christian Perrier <[EMAIL PROTECTED]> wrote:
> >
> > > >
> > > am ... i have installed mandrake on that macine and i have only lspcidrake
> >
> > That's enough, yes.
> >
> > > dc395x_trm      : Tekram|TRM-S1040 [STORAGE_SCSI] (vendor:1de1 
> > > device:0391)
> >
> > ATM, the driver which is loaded by discover1 for this hardware is
> > "dc3x5".
> >
> > So, either this is wrong and discover1-data is to be modified for the
> > correct module
> >
> > Or, this is right, and the module is not compiled with Debian kernels.
> >
> >
> 
> ----- End forwarded message -----
> 
> --
> 
> 
>

Reply via email to