Package: linux-image-2.6.24-1-686 Version: 2.6.24-6 Severity: normal --- Please enter the report below this line. ---
Dear friends, The wireless card runs Ok but the led doesn't blink. Folow my configuration.. Sorry my short english. Geovane Gonçalves debian-note:/var/log# lspci | grep 3945 06:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) debian-note:/var/log# lshw -short | grep 3945 /0/100/1c.2/0 wmaster0 network PRO/Wireless 3945ABG Network Connection debian-note:~/compat-wireless -2008-04-29# dpkg -l firmware-iwlwifi Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Nome Versão Descrição +++-=================================-=================================-================================================================================== ii firmware-iwlwifi 0.10 Binary firmware for Intel Wireless debian-note:~/compat-wireless-2008-04-29# lsmod | grep 3945 iwl3945 84148 0 firmware_class 9312 1 iwl3945 mac80211 159608 1 iwl3945 cfg80211 28960 2 iwl3945,mac8021 debian-note:~/compat-wireless-2008-04-29# modinfo iwl3945 filename: /lib/modules/2.6.24-1-686/updates/drivers/net/wireless/iwlwifi/iwl3945.ko license: GPL author: Copyright(c) 2003-2008 Intel Corporation version: 1.2.26k description: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux srcversion: 249028D74FA3F627B943C80 alias: pci:v00008086d00004227sv*sd*bc*sc*i* alias: pci:v00008086d00004222sv*sd*bc*sc*i* alias: pci:v00008086d00004227sv*sd00001014bc*sc*i* alias: pci:v00008086d00004222sv*sd00001044bc*sc*i* alias: pci:v00008086d00004222sv*sd00001034bc*sc*i* alias: pci:v00008086d00004222sv*sd00001005bc*sc*i* depends: mac80211,cfg80211,firmware_class vermagic: 2.6.24-1-686 SMP mod_unload 686 parm: antenna:select antenna (1=Main, 2=Aux, default 0 [both]) (int) parm: disable:manually disable the radio (default 0 [radio on]) (int) parm: hwcrypto:using hardware crypto engine (default 0 [software]) (int) parm: debug:debug output mask (int) parm: disable_hw_scan:disable hardware scanning (default 0) (int) parm: queues_num:number of hw queues. (int) parm: qos_enable:enable all QoS functionality (int) debian-note:~/compat-wireless-2008-04-29# modinfo mac80211 filename: /lib/modules/2.6.24-1-686/updates/net/mac80211/mac80211.ko license: GPL description: IEEE 802.11 subsystem license: GPL author: Mattias Nissler author: Stefano Brivio description: PID controller based rate control algorithm depends: cfg80211 vermagic: 2.6.24-1-686 SMP mod_unload 686 parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp) --- System information. --- Architecture: i386 Kernel: Linux 2.6.24-1-686 Debian Release: lenny/sid 500 testing security.debian.org 500 testing ftp.br.debian.org 500 testing debian-multimedia.org --- Package information. --- Depends (Version) | Installed =======================================-+-=============== initramfs-tools (>= 0.55) | 0.92 OR yaird (>= 0.0.12-8) | OR linux-initramfs-tool | module-init-tools | 3.4-1
