Package: linux-image-2.6.22-3-k7
Version: 2.6.22-6.lenny1
Severity: normal
The default congestion control choice in the Lenny kernel configuration is BIC.
This is a poor choice because BIC has a number of problems and was replacede by
CUBIC
in 2.6.20 or so kernel release. Debian seems to have continued carrying forward
an old configuration
file and continued using BIC.
This is important because BIC is unfair and could have a negative impact on
overall Internet
congestion. PLEASE FIX, it is trivial to change the kernel config to either use
CUBIC, RENO
or H-TCP any of these are stable and safe choices. The kernel.org default
(used by other distro's
as well) is CUBIC, RENO is the same as old 2.4 Linux for you conservative
Debian types,
and H-TCP is for the alternative crowd.
-- Package-specific info:
** Version:
Linux version 2.6.22-3-k7 (Debian 2.6.22-6.lenny1) ([EMAIL PROTECTED]) (gcc
version 4.1.3 20071209 (prerelease) (Debian 4.1.2-18)) #1 SMP Sun Feb 10
21:04:14 UTC 2008
** Not tainted
** Kernel log:
skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
skge eth0: disabling interface
skge eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
skge eth0: disabling interface
skge eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
skge eth0: Link is down.
skge eth0: Link is up at 100 Mbps, full duplex, flow control none
skge eth0: Link is down.
skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
skge eth0: disabling interface
skge eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
skge eth0: Link is down.
skge eth0: Link is up at 100 Mbps, full duplex, flow control none
skge eth0: Link is down.
skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
skge eth0: disabling interface
skge eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
skge eth0: Link is down.
skge eth0: Link is up at 100 Mbps, full duplex, flow control none
eth0: no IPv6 routers present
skge eth0: Link is down.
skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
skge eth0: disabling interface
skge eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
skge eth0: disabling interface
skge eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
skge eth0: Link is down.
skge eth0: Link is up at 100 Mbps, full duplex, flow control none
skge eth0: Link is down.
skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
skge eth0: disabling interface
skge eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
skge eth0: Link is down.
skge eth0: Link is up at 100 Mbps, full duplex, flow control none
skge eth0: Link is down.
skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
skge eth0: disabling interface
skge eth0: enabling interface
ADDRCONF(NETDEV_UP): eth0: link is not ready
skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
eth0: no IPv6 routers present
skge eth0: Link is down.
skge eth0: Link is up at 100 Mbps, full duplex, flow control none
skge eth0: Link is down.
skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
skge eth0: Link is down.
skge eth0: Link is up at 100 Mbps, full duplex, flow control none
skge eth0: Link is down.
skge eth0: Link is up at 1000 Mbps, full duplex, flow control both
skge eth0: disabling interface
tcpdump uses obsolete (PF_INET,SOCK_PACKET)
device eth1 entered promiscuous mode
audit(1208996809.980:2): dev=eth1 prom=256 old_prom=0 auid=4294967295
device eth1 left promiscuous mode
audit(1208996809.980:3): dev=eth1 prom=0 old_prom=256 auid=4294967295
device eth1 entered promiscuous mode
audit(1208996822.481:4): dev=eth1 prom=256 old_prom=0 auid=4294967295
device eth1 left promiscuous mode
audit(1208996823.481:5): dev=eth1 prom=0 old_prom=256 auid=4294967295
device eth1 entered promiscuous mode
audit(1208996829.481:6): dev=eth1 prom=256 old_prom=0 auid=4294967295
device eth1 left promiscuous mode
audit(1208996829.981:7): dev=eth1 prom=0 old_prom=256 auid=4294967295
device eth1 entered promiscuous mode
audit(1208996848.983:8): dev=eth1 prom=256 old_prom=0 auid=4294967295
device eth1 left promiscuous mode
audit(1208996854.483:9): dev=eth1 prom=0 old_prom=256 auid=4294967295
device eth1 entered promiscuous mode
audit(1208996859.483:10): dev=eth1 prom=256 old_prom=0 auid=4294967295
device eth1 left promiscuous mode
audit(1208996878.984:11): dev=eth1 prom=0 old_prom=256 auid=4294967295
TCP cubic registered
** Loaded modules:
Module Size Used by
tcp_cubic 5632 3
tcp_diag 2048 0
inet_diag 12040 1 tcp_diag
button 8208 0
ac 5508 0
battery 10308 0
ipv6 239460 22
loop 17412 0
tsdev 8320 0
snd_intel8x0 32412 0
snd_ac97_codec 93220 1 snd_intel8x0
rtc 13144 0
amd_rng 3140 0
serio_raw 7044 0
pcspkr 3392 0
ac97_bus 2560 1 snd_ac97_codec
snd_pcm 72772 2 snd_intel8x0,snd_ac97_codec
i2c_amd756 6788 0
psmouse 36432 0
amd64_agp 12420 1
agpgart 32200 1 amd64_agp
i2c_amd8111 5824 0
snd_timer 21380 1 snd_pcm
snd 48804 4 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 7840 1 snd
k8temp 5824 0
i2c_core 24000 2 i2c_amd756,i2c_amd8111
snd_page_alloc 10376 2 snd_intel8x0,snd_pcm
shpchp 31380 0
pci_hotplug 29568 1 shpchp
evdev 9664 0
ext3 122696 2
jbd 55848 1 ext3
mbcache 8580 1 ext3
raid1 22784 1
md_mod 74196 3 raid1
sd_mod 27584 6
ide_cd 36896 0
cdrom 33184 1 ide_cd
sata_sil 11208 0
ata_generic 7876 0
libata 117168 2 sata_sil,ata_generic
floppy 55332 0
aic79xx 250840 4
scsi_transport_spi 23424 1 aic79xx
scsi_mod 137356 4 sd_mod,libata,aic79xx,scsi_transport_spi
skge 38992 0
ohci_hcd 20036 0
generic 5124 0 [permanent]
ehci_hcd 31116 0
tg3 101124 0
usbcore 126024 3 ohci_hcd,ehci_hcd
amd74xx 13788 0 [permanent]
ide_core 114372 3 ide_cd,generic,amd74xx
thermal 13768 0
processor 31496 1 thermal
fan 5124 0
** PCI devices:
00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8111 PCI
[1022:7460] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=69
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f0000000-f00fffff
Prefetchable memory behind bridge: 88000000-880fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:07.0 ISA bridge [0601]: Advanced Micro Devices [AMD] AMD-8111 LPC
[1022:7468] (rev 05)
Subsystem: IBM Unknown device [1014:02b7]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.1 IDE interface [0101]: Advanced Micro Devices [AMD] AMD-8111 IDE
[1022:7469] (rev 03) (prog-if 8a [Master SecP PriP])
Subsystem: IBM Unknown device [1014:02b7]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at 1460 [size=16]
Kernel driver in use: AMD_IDE
Kernel modules: amd74xx
00:07.2 SMBus [0c05]: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0
[1022:746a] (rev 02)
Subsystem: IBM Unknown device [1014:02b7]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 11
Region 0: I/O ports at 1440 [size=32]
Kernel driver in use: amd8111_smbus2
Kernel modules: i2c-amd8111
00:07.3 Bridge [0680]: Advanced Micro Devices [AMD] AMD-8111 ACPI [1022:746b]
(rev 05)
Subsystem: IBM Unknown device [1014:02b7]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: amd756_smbus
Kernel modules: amd-rng, i2c-amd756
00:07.5 Multimedia audio controller [0401]: Advanced Micro Devices [AMD]
AMD-8111 AC97 Audio [1022:746d] (rev 03)
Subsystem: IBM Unknown device [1014:02b7]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 22
Region 0: I/O ports at 1000 [size=256]
Region 1: I/O ports at 1400 [size=64]
Kernel driver in use: Intel ICH
Kernel modules: snd-intel8x0
00:0a.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
[1022:7450] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f0100000-f01fffff
Prefetchable memory behind bridge: 0000000088100000-00000000881fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:0a.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0500000 (64-bit, non-prefetchable) [size=4K]
00:0b.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
[1022:7450] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
Memory behind bridge: f0200000-f02fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:0b.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0510000 (64-bit, non-prefetchable) [size=4K]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
Kernel modules: k8temp
00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: k8temp
Kernel modules: k8temp
01:02.0 IDE interface [0101]: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid]
Serial ATA Controller [1095:3512] (rev 01) (prog-if 85 [Master SecO PriO])
Subsystem: IBM Unknown device [1014:3512]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 5010 [size=8]
Region 1: I/O ports at 5020 [size=4]
Region 2: I/O ports at 5018 [size=8]
Region 3: I/O ports at 5024 [size=4]
Region 4: I/O ports at 5000 [size=16]
Region 5: Memory at f0000000 (32-bit, non-prefetchable) [size=512]
[virtual] Expansion ROM at 88000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
Kernel modules: sata_sil
01:03.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
(prog-if 10 [OHCI])
Subsystem: IBM Unknown device [1014:02b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f0020000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
01:03.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43)
(prog-if 10 [OHCI])
Subsystem: IBM Unknown device [1014:02b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at f0030000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci_hcd
Kernel modules: ohci-hcd
01:03.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04)
(prog-if 20 [EHCI])
Subsystem: IBM Unknown device [1014:02b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 132 (4000ns min, 8500ns max), Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 17
Region 0: Memory at f0040000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
02:01.0 Ethernet controller [0200]: SysKonnect SK-9871 V2.0 Gigabit Ethernet
1000Base-ZX Adapter, PCI64, Fiber ZX/SC [1148:4320] (rev 20)
Subsystem: SysKonnect SK-9821 V2.0 Gigabit Ethernet 10/100/1000Base-T
Adapter [1148:5021]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f0100000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at 2000 [size=256]
[virtual] Expansion ROM at 88100000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge
Kernel modules: skge
03:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5703X
Gigabit Ethernet [14e4:16a7] (rev 02)
Subsystem: IBM Unknown device [1014:026f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
Kernel modules: tg3
08:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] AMD-8151 System
Controller [1022:7454] (rev 14)
Subsystem: IBM Unknown device [1014:02b7]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Capabilities: <access denied>
Kernel driver in use: agpgart-amd64
Kernel modules: amd64-agp
08:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8151 AGP Bridge
[1022:7455] (rev 14) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 99
Bus: primary=08, secondary=09, subordinate=0d, sec-latency=68
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0800000-f08fffff
Prefetchable memory behind bridge: e0000000-efffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
08:03.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
[1022:7450] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=08, secondary=0e, subordinate=12, sec-latency=64
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
08:03.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0520000 (64-bit, non-prefetchable) [size=4K]
08:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge
[1022:7450] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=08, secondary=13, subordinate=17, sec-latency=96
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f0900000-f09fffff
Prefetchable memory behind bridge: 0000000088200000-00000000882fffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
08:04.1 PIC [0800]: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451] (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
[1022:7451]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f0530000 (64-bit, non-prefetchable) [size=4K]
09:00.0 VGA compatible controller [0300]: ATI Technologies Inc Radeon R300 NG
[FireGL X1] [1002:4e47] (rev 80) (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Unknown device [1002:0172]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at f0800000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at f0820000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: radeonfb
09:00.1 Display controller [0380]: ATI Technologies Inc Radeon R300 [FireGL X1]
(Secondary) [1002:4e67] (rev 80)
Subsystem: ATI Technologies Inc Unknown device [1002:0173]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 64 bytes
Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at f0810000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
13:04.0 SCSI storage controller [0100]: Adaptec AIC-7902B U320 [9005:801d] (rev
10)
Subsystem: IBM Unknown device [1014:02b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 72 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at 4400 [disabled] [size=256]
Region 1: Memory at f0900000 (64-bit, non-prefetchable) [size=8K]
Region 3: I/O ports at 4000 [disabled] [size=256]
[virtual] Expansion ROM at 88200000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: aic79xx
Kernel modules: aic79xx
13:04.1 SCSI storage controller [0100]: Adaptec AIC-7902B U320 [9005:801d] (rev
10)
Subsystem: IBM Unknown device [1014:02b7]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 72 (10000ns min, 6250ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 23
Region 0: I/O ports at 4c00 [disabled] [size=256]
Region 1: Memory at f0910000 (64-bit, non-prefetchable) [size=8K]
Region 3: I/O ports at 4800 [disabled] [size=256]
[virtual] Expansion ROM at 88280000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: aic79xx
Kernel modules: aic79xx
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.22-3-k7 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.22-3-k7 depends on:
ii initramfs-tools [linux-initr 0.91e tools for generating an initramfs
ii module-init-tools 3.3-pre11-4 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.22-3-k7 recommends:
ii libc6-i686 2.7-6 GNU C Library: Shared libraries [i
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.22-3-k7/preinst/failed-to-move-modules-2.6.22-3-k7:
linux-image-2.6.22-3-k7/postinst/depmod-error-2.6.22-3-k7: false
linux-image-2.6.22-3-k7/preinst/lilo-has-ramdisk:
linux-image-2.6.22-3-k7/prerm/removing-running-kernel-2.6.22-3-k7: true
* linux-image-2.6.22-3-k7/preinst/already-running-this-2.6.22-3-k7:
linux-image-2.6.22-3-k7/prerm/would-invalidate-boot-loader-2.6.22-3-k7: true
linux-image-2.6.22-3-k7/postinst/old-system-map-link-2.6.22-3-k7: true
linux-image-2.6.22-3-k7/postinst/old-dir-initrd-link-2.6.22-3-k7: true
linux-image-2.6.22-3-k7/postinst/kimage-is-a-directory:
linux-image-2.6.22-3-k7/preinst/overwriting-modules-2.6.22-3-k7: true
linux-image-2.6.22-3-k7/postinst/create-kimage-link-2.6.22-3-k7: true
linux-image-2.6.22-3-k7/preinst/initrd-2.6.22-3-k7:
linux-image-2.6.22-3-k7/preinst/abort-install-2.6.22-3-k7:
linux-image-2.6.22-3-k7/preinst/lilo-initrd-2.6.22-3-k7: true
linux-image-2.6.22-3-k7/postinst/depmod-error-initrd-2.6.22-3-k7: false
linux-image-2.6.22-3-k7/postinst/old-initrd-link-2.6.22-3-k7: true
linux-image-2.6.22-3-k7/preinst/elilo-initrd-2.6.22-3-k7: true
linux-image-2.6.22-3-k7/postinst/bootloader-error-2.6.22-3-k7:
linux-image-2.6.22-3-k7/preinst/abort-overwrite-2.6.22-3-k7:
linux-image-2.6.22-3-k7/postinst/bootloader-test-error-2.6.22-3-k7:
linux-image-2.6.22-3-k7/preinst/bootloader-initrd-2.6.22-3-k7: true
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
