On Thursday 24 April 2008 00:39:07 giggzounet wrote:
> Kel Modderman a écrit :
> > Hi,
>
> Hi,
>
> thx for your quick answer!
>
> >
> > Below you describe that you setup the "wpa-roam" scheme of wpasupplicant
> > package. When using this mode, _wpa_supplicant_ does the "link detection",
> > and
> > it notifies a listening wpa_cli daemon which in turn calls ifup/ifdown as
> > required. There is no use for ifplud in this mode, ifplugd will only get in
> > the
> > way.
> >
>
> Ok. I believe you that wpa_supplicant does the link detection and
> so...but how to tell the pc that wpa_supplicant must be launched when
> there is a possible connection...shall I write a script and launch it at
> boot ?
You used the wpa-roam setup. Read the first paragraph of wpa_action(8)
(aka, "man wpa_action"), wpa_action is the script wpa_supplicant invokes
when using wpa-roam scheme.
You set the master interface to be started auto or allow-hotplug in
/etc/network/interfaces like:
allow-hotplug eth1
iface eth1 inet manual
wpa-roam /etc/wpa_supplicant/conf
iface default inet dhcp
>
> I have read all the documentation of the package and I don't find
> anything on this subject : how is launched wpa_supplicant ? By me it is
> not launched. I must do it myself or enter "ifup eth1".
>
> I don't have any auto eth1...or something like that.
> In normal case when my pc is associated to an ap (for example an open
> network) ifplugd detects it and launch all. But in the case of ap using
> WPA, the pc doesn't associate automaticly...(perhaps there is an option...)
>
> Regards,
> Guillaume
>
Thanks, Kel.
