Subject: linux-image-2.6.24-1-686: Sound stopped working with new kernel
Package: linux-image-2.6.24-1-686
Version: 2.6.24-5
Severity: critical
Justification: breaks unrelated software
*** Please type your report below this line ***
Sound worked fine with 2.6.22-3-686 kernel using Sound Fusion CS46xx card.
Sound stopped working with new kernel 2.6.24-1-686. Volume control app
in GNOME top panel shows red "X" and when clicked on reports "No volume
control, Gstreamer plugin, and/or devices found."
-- Package-specific info:
** Version:
Linux version 2.6.24-1-686 (Debian 2.6.24-5) ([EMAIL PROTECTED]) (gcc version
4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Thu Mar 27 17:45:04 UTC
2008
** Command line:
root=/dev/hda1 ro xres=1280x1024
** Not tainted
** Kernel log:
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Freeing unused kernel memory: 248k freed
input: AT Translated Set 2 keyboard as /class/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 10 (level, low) ->
IRQ 10
PCI: Setting latency timer of device 0000:00:1f.2 to 64
uhci_hcd 0000:00:1f.2: UHCI Host Controller
uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1f.2: irq 10, io base 0x0000ef80
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ICH: IDE controller (0x8086:0x2411 rev 0x02) at PCI slot 0000:00:1f.1
ICH: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
hda: Maxtor 52049H3, ATA DISK drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/66 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: LG CD-RW CED-8080B, ATAPI CD/DVD-ROM drive
hdc: Lite-On LTN483S 48x Max, ATAPI CD/DVD-ROM drive
hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdc: UDMA/33 mode selected
hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hdd: MWDMA2 mode selected
ide1 at 0x170-0x177,0x376 on irq 15
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKA] -> GSI 11 (level, low) ->
IRQ 11
3c59x: Donald Becker and others.
0000:02:08.0: 3Com PCI 3c905C Tornado at d082ec00.
hda: max request size: 128KiB
hda: 39882528 sectors (20419 MB) w/2048KiB Cache, CHS=39566/16/63
hda: cache flushes not supported
hda: hda1 hda2 < hda5 >
hdc: ATAPI 48X CD-ROM drive, 120kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 2048kB Cache
Attempting manual resume
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102
agpgart: Detected an Intel i820 Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
iTCO_wdt: Found a ICH TCO device (Version=1, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
PCI: setting IRQ 9 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ
9
input: PC Speaker as /class/input/input1
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: PS/2 Generic Mouse as /class/input/input3
parport_pc 00:09: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
Adding 746980k swap on /dev/hda5. Priority:-1 extents:1 across:746980k
EXT3 FS on hda1, internal journal
loop: module loaded
eth0: setting full-duplex.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
eth0: no IPv6 routers present
** Loaded modules:
Module Size Used by
ppdev 8804 0
lp 11076 0
ac 6116 0
battery 13572 0
speedstep_lib 5348 0
cpufreq_conservative 7560 0
cpufreq_userspace 4260 0
cpufreq_stats 5184 0
cpufreq_ondemand 8492 0
cpufreq_powersave 1856 0
freq_table 4512 2 cpufreq_stats,cpufreq_ondemand
ipv6 240836 14
loop 16804 0
parport_pc 33668 1
parport 34280 3 ppdev,lp,parport_pc
psmouse 36464 0
button 8432 0
serio_raw 6660 0
pcspkr 3200 0
i2c_i801 9232 0
i2c_core 22432 1 i2c_i801
iTCO_wdt 11268 0
shpchp 31028 0
pci_hotplug 27712 1 shpchp
intel_agp 23412 1
agpgart 31688 1 intel_agp
rtc 13052 0
evdev 11104 2
ext3 122888 1
jbd 43732 1 ext3
mbcache 8288 1 ext3
ide_cd 36224 0
cdrom 32512 1 ide_cd
ide_disk 15648 3
floppy 54628 0
3c59x 41064 0
mii 5312 1 3c59x
piix 7492 0 [permanent]
generic 4388 0 [permanent]
uhci_hcd 23376 0
ide_core 108292 4 ide_cd,ide_disk,piix,generic
ata_generic 7428 0
usbcore 132940 2 uhci_hcd
libata 144464 1 ata_generic
scsi_mod 141164 1 libata
thermal 16028 0
processor 36520 1 thermal
fan 4772 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82820 820 (Camino) Chipset Host
Bridge (MCH) [8086:2501] (rev 04)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82820 820 (Camino) Chipset AGP
Bridge [8086:250f] (rev 04) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: fc700000-fe7fffff
Prefetchable memory behind bridge: e4400000-f44fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1e.0 PCI bridge [0604]: Intel Corporation 82801AA PCI Bridge [8086:2418]
(rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe800000-feafffff
Prefetchable memory behind bridge: f4500000-f45fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation 82801AA ISA Bridge (LPC)
[8086:2410] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel modules: iTCO_wdt, intel-rng
00:1f.1 IDE interface [0101]: Intel Corporation 82801AA IDE Controller
[8086:2411] (rev 02) (prog-if 80 [Master])
Subsystem: Intel Corporation 82801AA IDE Controller [8086:2411]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:1f.2 USB Controller [0c03]: Intel Corporation 82801AA USB Controller
[8086:2412] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation 82801AA USB Controller [8086:2412]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 10
Region 4: I/O ports at ef80 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1f.3 SMBus [0c05]: Intel Corporation 82801AA SMBus Controller [8086:2413]
(rev 02)
Subsystem: Intel Corporation 82801AA SMBus Controller [8086:2413]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 9
Region 4: I/O ports at efa0 [size=16]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV15 [GeForce2
GTS/Pro] [10de:0150] (rev a4) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation GeForce2 GTS [10de:002e]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at fe7f0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel modules: nvidiafb
02:08.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado]
[10b7:9200] (rev 78)
Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for PC
Management NIC [10b7:1000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at dc00 [size=128]
Region 1: Memory at feaffc00 (32-bit, non-prefetchable) [size=128]
Expansion ROM at f4500000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3c59x
Kernel modules: 3c59x
02:0a.0 Multimedia audio controller [0401]: Cirrus Logic CS 4614/22/24/30
[CrystalClear SoundFusion Audio Accelerator] [1013:6003] (rev 01)
Subsystem: Voyetra Technologies Santa Cruz [5053:3357]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 64 (1000ns min, 6000ns max)
Interrupt: pin A routed to IRQ 3
Region 0: Memory at feafe000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at fe900000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.24-1-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.24-1-686 depends on:
ii debconf [debconf-2.0] 1.5.20 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92 tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.24-1-686 recommends:
ii libc6-i686 2.7-10 GNU C Library: Shared libraries [i
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.24-1-686/preinst/overwriting-modules-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/bootloader-error-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/create-kimage-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-system-map-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/prerm/would-invalidate-boot-loader-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/initrd-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/failed-to-move-modules-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/depmod-error-initrd-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/bootloader-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/old-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/lilo-has-ramdisk:
linux-image-2.6.24-1-686/postinst/old-dir-initrd-link-2.6.24-1-686: true
linux-image-2.6.24-1-686/preinst/abort-install-2.6.24-1-686:
linux-image-2.6.24-1-686/prerm/removing-running-kernel-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/depmod-error-2.6.24-1-686: false
linux-image-2.6.24-1-686/preinst/abort-overwrite-2.6.24-1-686:
linux-image-2.6.24-1-686/preinst/elilo-initrd-2.6.24-1-686: true
linux-image-2.6.24-1-686/postinst/bootloader-test-error-2.6.24-1-686:
linux-image-2.6.24-1-686/postinst/kimage-is-a-directory:
linux-image-2.6.24-1-686/preinst/lilo-initrd-2.6.24-1-686: true
____________________________________________________________________________________
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile. Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
