thanks for response hummm i change in fstab: proc /proc proc defaults 0 0 /dev/sda2 / ext3 defaults,errors=remount-ro 0 1 /dev/sda3 /boot ext3 defaults 0 2 /dev/sda5 /home ext3 defaults 0 2 /dev/sda6 /tmp ext3 defaults 0 2 /dev/sda7 /usr ext3 defaults 0 2 /dev/sda8 /var ext3 defaults 0 2 /dev/sda1 none swap sw 0 0 /dev/hda /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 /dev/sdb1 /mnt/EntrepotImageJPG ext3 rw,user,auto 0 0 FOR: proc /proc proc defaults 0 0 /dev/disk/by-uuid/35871801-411b-4e94-a28d-c954be047faa / ext3 defaults,errors=remount-ro 0 1 /dev/disk/by-uuid/13b25069-c286-4b1f-a9d4-679929d9967d /boot ext3 defaults 0 2 dev/disk/by-uuid/673a0f60-9556-4b27-b876-ca76b200cb9e /home ext3 defaults 0 2 dev/disk/by-uuid/sda6 /tmp ext3 defaults 0 2 dev/disk/by-uuid/sda7 /usr ext3 defaults 0 2 dev/disk/by-uuid/sda8 /var ext3 defaults 0 2 /dev/sda1 none swap sw 0 0 /dev/hda /media/cdrom0 udf,iso9660 user,noauto 0 0 /dev/fd0 /media/floppy0 auto rw,user,noauto 0 0 /dev/sdb1 /mnt/EntrepotImageJPG ext3 rw,user,auto 0 0 For the swap, not uuid. Where that I take it??? With sarge, i n' ever had problems with that. best regards, Pat
>>> dann frazier <[EMAIL PROTECTED]> 2008-04-18 17:11 >>> On Fri, Apr 18, 2008 at 12:02:08PM -0400, Patrick Mayrand wrote: > server6 disk in raid51 HBA Fiber Channel (qla2xxx) On the boot of my > linux image, 1 times on 3 it works. When it works My local disk is > sda $ dmesg ...qla2xxx 0000:04:04.0: Found an ISP2312, irq 201, > iobase 0xf8842000 Try using the names under /dev/disk/by-* (/dev/disk/by-uuid) instead of names like sda, sdb. Device enumeration isn't guaranteed to be consistent across reboots. -- dann frazier
