Package: installation-reports Severity: important
-- Package-specific info: Boot method: netinst image Image version: modified di-nslu2.bin (from joeyh's 2008-03-07) Date: 2008-03-07, 06:00 UTC Machine: Linksys NSLU2 Partitions: rootfs / rootfs rw 0 0 none /sys sysfs rw,nosuid,nodev,noexec 0 0 none /proc proc rw,nosuid,nodev,noexec 0 0 udev /dev tmpfs rw 0 0 /dev/sda1 / ext3 rw,errors=remount-ro,data=ordered 0 0 /dev/sda1 /dev/.static/dev ext3 rw,errors=remount-ro,data=ordered 0 0 tmpfs /lib/init/rw tmpfs rw,nosuid 0 0 usbfs /proc/bus/usb usbfs rw,nosuid,nodev,noexec 0 0 tmpfs /dev/shm tmpfs rw,nosuid,nodev 0 0 devpts /dev/pts devpts rw,nosuid,noexec 0 0 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [O] Detect network card: [E] Configure network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Install base system: [E] Clock/timezone setup: [O] User/password setup: [O] Install tasks: [O] Install boot loader: [O] Overall install: [O/E] Comments/Problems: Booting joeyh's daily build, the installer did not find an attached USB ethernet adapter, a Linksys USB200M. However, this adapter was bought for this purpose today, so I am willing to bet the revision was not yet compatible with upstream kernel yet, or some other horror on Linksys' part. Instead, I extracted the di-nslu2.bin image and added the non-free NPE firmware so I could install via the onboard ethernet. Everything during install looked good, until as I was watching /var/log/syslog, I saw that openssh-server failed to install, due to not being available in lenny currently. The frontend did not communicate this error and skipped over it. Since I did notice it before reboot, I was able to chroot into /target, switch sources.list over to sid, and install openssh-server. Had I not done this, an unbootable situation would have occured due to lack of alternate input. Aside from that, it works great! d-i and the installed system is noticably faster, and "openssl speed rsa1024" is over twice as fast as when the NSLU2 was on the arm port. Thanks! -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to [EMAIL PROTECTED] ============================================== Installer lsb-release: ============================================== DISTRIB_ID=Debian DISTRIB_DESCRIPTION="Debian GNU/Linux installer" DISTRIB_RELEASE="lenny (installer build 20080307-20:14)" X_INSTALLATION_MEDIUM=netboot ============================================== Installer hardware-summary: ============================================== umame -a: Linux brainslug 2.6.22-3-ixp4xx #1 Sat Nov 17 02:06:54 UTC 2007 armv5tel unknown lspci -nn: 00:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) lspci -nn: 00:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) lspci -nn: 00:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) lspci -vnn: 00:01.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10) lspci -vnn: Subsystem: NEC Corporation USB [1033:0035] lspci -vnn: Flags: bus master, medium devsel, latency 8, IRQ 28 lspci -vnn: Memory at 48000000 (32-bit, non-prefetchable) [size=4K] lspci -vnn: Capabilities: [40] Power Management version 2 lspci -vnn: Kernel driver in use: ohci_hcd lspci -vnn: lspci -vnn: 00:01.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10) lspci -vnn: Subsystem: NEC Corporation USB [1033:0035] lspci -vnn: Flags: bus master, medium devsel, latency 8, IRQ 27 lspci -vnn: Memory at 48001000 (32-bit, non-prefetchable) [size=4K] lspci -vnn: Capabilities: [40] Power Management version 2 lspci -vnn: Kernel driver in use: ohci_hcd lspci -vnn: lspci -vnn: 00:01.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20) lspci -vnn: Subsystem: NEC Corporation USB 2.0 [1033:00e0] lspci -vnn: Flags: bus master, medium devsel, latency 68, IRQ 26 lspci -vnn: Memory at 48002000 (32-bit, non-prefetchable) [size=256] lspci -vnn: Capabilities: [40] Power Management version 2 lspci -vnn: Kernel driver in use: ehci_hcd lspci -vnn: modulemap: 1033:0035 ohci_hcd modulemap: 1033:0035 ohci_hcd modulemap: 1033:00e0 ehci_hcd lsmod: Module Size Used by lsmod: reiserfs 268500 0 lsmod: ext3 135976 1 lsmod: jbd 59464 1 ext3 lsmod: vfat 13120 0 lsmod: fat 55228 1 vfat lsmod: ext2 67752 0 lsmod: mbcache 9028 2 ext3,ext2 lsmod: sd_mod 26544 3 lsmod: usb_storage 80203 2 lsmod: scsi_mod 114604 2 sd_mod,usb_storage lsmod: ixp4xx_mac 19284 0 lsmod: evdev 10304 0 lsmod: ixp4xx_qmgr 8428 5 ixp4xx_mac lsmod: ixp4xx_npe 14176 2 ixp4xx_mac lsmod: firmware_class 10272 1 ixp4xx_npe lsmod: ixp4xx_beeper 3456 0 lsmod: ehci_hcd 33324 0 lsmod: ohci_hcd 18468 0 lsmod: usbcore 129404 4 usb_storage,ehci_hcd,ohci_hcd df: Filesystem 1k-blocks Used Available Use% Mounted on df: tmpfs 14924 16 14908 0% /dev df: tmpfs 14924 16 14908 0% /dev df: /dev/sda1 37452596 452584 35097516 1% /target df: /dev/sda1 37452596 452584 35097516 1% /dev/.static/dev df: tmpfs 14924 16 14908 0% /target/dev free: total used free shared buffers free: Mem: 29852 28084 1768 0 640 free: Swap: 1020116 5204 1014912 free: Total: 1049968 33288 1016680 cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 48: pccardctl: not found cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 49: pccardctl: not found cardctl status: /usr/bin/report-hw: /usr/bin/report-hw: 50: cardctl: not found cardctl ident: /usr/bin/report-hw: /usr/bin/report-hw: 51: cardctl: not found /proc/cpuinfo: Processor : XScale-IXP42x Family rev 1 (v5l) /proc/cpuinfo: BogoMIPS : 266.24 /proc/cpuinfo: Features : swp half fastmult edsp /proc/cpuinfo: CPU implementer : 0x69 /proc/cpuinfo: CPU architecture: 5TE /proc/cpuinfo: CPU variant : 0x0 /proc/cpuinfo: CPU part : 0x41f /proc/cpuinfo: CPU revision : 1 /proc/cpuinfo: Cache type : undefined 5 /proc/cpuinfo: Cache clean : undefined 5 /proc/cpuinfo: Cache lockdown : undefined 5 /proc/cpuinfo: Cache format : Harvard /proc/cpuinfo: I size : 32768 /proc/cpuinfo: I assoc : 32 /proc/cpuinfo: I line length : 32 /proc/cpuinfo: I sets : 32 /proc/cpuinfo: D size : 32768 /proc/cpuinfo: D assoc : 32 /proc/cpuinfo: D line length : 32 /proc/cpuinfo: D sets : 32 /proc/cpuinfo: /proc/cpuinfo: Hardware : Linksys NSLU2 /proc/cpuinfo: Revision : 0000 /proc/cpuinfo: Serial : 0000000000000000 /proc/ioports: 00000000-0000ffff : PCI I/O Space /proc/iomem: 00000000-01ffffff : System RAM /proc/iomem: 00021000-00271fff : Kernel text /proc/iomem: 00272000-002a8d93 : Kernel data /proc/iomem: 48000000-4bffffff : PCI Memory Space /proc/iomem: 48000000-48000fff : 0000:00:01.0 /proc/iomem: 48000000-48000fff : ohci_hcd /proc/iomem: 48001000-48001fff : 0000:00:01.1 /proc/iomem: 48001000-48001fff : ohci_hcd /proc/iomem: 48002000-480020ff : 0000:00:01.2 /proc/iomem: 48002000-480020ff : ehci_hcd /proc/iomem: 50000000-50ffffff : IXP4XX-Flash.0 /proc/iomem: 50000000-50ffffff : IXP4XXFlash /proc/iomem: 60000000-60003fff : ixp4xx_qmgr.0 /proc/iomem: 60000000-60003fff : ixp_qmgr /proc/iomem: c8000000-c8000fff : serial8250.0 /proc/iomem: c8000000-c800001f : serial /proc/iomem: c8001000-c8001fff : serial8250.0 /proc/iomem: c8001000-c800101f : serial /proc/iomem: c8007000-c8007fff : ixp4xx_npe.1 /proc/iomem: c8007000-c8007fff : NPE-B /proc/iomem: c8008000-c8008fff : ixp4xx_npe.2 /proc/iomem: c8008000-c8008fff : NPE-C /proc/iomem: c8009000-c80091ff : ixp4xx_mac.0 /proc/iomem: c8009000-c80091ff : ixp4xx_mac /proc/iomem: c800b000-c800bfff : pxa2xx-udc /proc/interrupts: CPU0 /proc/interrupts: 3: 61152 IXP4xx qmgr /proc/interrupts: 5: 512367 IXP4xx timer1 /proc/interrupts: 11: 1346 IXP4xx ixp4xx-beeper /proc/interrupts: 15: 761 IXP4xx serial /proc/interrupts: 22: 0 IXP4xx NSLU2 power button /proc/interrupts: 26: 1050410 IXP4xx ehci_hcd:usb3 /proc/interrupts: 27: 0 IXP4xx ohci_hcd:usb2 /proc/interrupts: 28: 2 IXP4xx ohci_hcd:usb1 /proc/interrupts: 29: 0 IXP4xx NSLU2 reset button /proc/interrupts: Err: 0 /proc/meminfo: MemTotal: 29852 kB /proc/meminfo: MemFree: 1764 kB /proc/meminfo: Buffers: 640 kB /proc/meminfo: Cached: 18688 kB /proc/meminfo: SwapCached: 1728 kB /proc/meminfo: Active: 12864 kB /proc/meminfo: Inactive: 8756 kB /proc/meminfo: SwapTotal: 1020116 kB /proc/meminfo: SwapFree: 1014912 kB /proc/meminfo: Dirty: 268 kB /proc/meminfo: Writeback: 0 kB /proc/meminfo: AnonPages: 2044 kB /proc/meminfo: Mapped: 1536 kB /proc/meminfo: Slab: 3040 kB /proc/meminfo: SReclaimable: 1284 kB /proc/meminfo: SUnreclaim: 1756 kB /proc/meminfo: PageTables: 392 kB /proc/meminfo: NFS_Unstable: 0 kB /proc/meminfo: Bounce: 0 kB /proc/meminfo: CommitLimit: 1035040 kB /proc/meminfo: Committed_AS: 12456 kB /proc/meminfo: VmallocTotal: 991232 kB /proc/meminfo: VmallocUsed: 17332 kB /proc/meminfo: VmallocChunk: 966652 kB /proc/bus/input/devices: I: Bus=0019 Vendor=001f Product=0001 Version=0100 /proc/bus/input/devices: N: Name="ixp4xx beeper" /proc/bus/input/devices: P: Phys=ixp4xx/gpio /proc/bus/input/devices: S: Sysfs=/class/input/input0 /proc/bus/input/devices: U: Uniq= /proc/bus/input/devices: H: Handlers=kbd event0 /proc/bus/input/devices: B: EV=40001 /proc/bus/input/devices: B: SND=6 /proc/bus/input/devices: dmidecode: /usr/bin/report-hw: /usr/bin/report-hw: 65: dmidecode: not found ============================================== Installer status: ============================================== Package: preseed-common Status: install ok unpacked Version: 1.35 Depends: cdebconf-udeb, di-utils (>= 1.14) Description: common files for preseeding Package: udpkg Status: install ok unpacked Version: 1.06 Depends: libc6 (>= 2.5-5), libdebian-installer4-udeb (>= 0.51) Description: tiny dpkg clone Package: oldsys-preseed Status: install ok unpacked Version: 1.3 Depends: devio-udeb Description: Preseed debian-installer from an existing device Package: libnss-dns-udeb Status: install ok unpacked Version: 2.7-9 Description: GNU C Library: NSS helper for DNS - udeb Package: download-installer Status: install ok installed Version: 1.20 Depends: anna (>= 1.07), cdebconf-udeb, net-retriever Description: Download installer components Installer-Menu-Item: 2300 Package: lowmemcheck Status: install ok unpacked Version: 1.27 Depends: cdebconf-udeb (>= 0.75), main-menu (>= 1.03) Description: detect low-memory systems and enter lowmem mode Package: main-menu Status: install ok unpacked Version: 1.25 Depends: cdebconf-udeb, libc6 (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.55) Description: Debian installer main menu Package: di-utils-shell Status: install ok unpacked Version: 1.55 Depends: cdebconf-udeb, di-utils (>= 1.18) Description: Execute a shell Installer-Menu-Item: 95000 Package: di-utils Status: install ok installed Version: 1.55 Depends: cdebconf-udeb, libc6 (>= 2.7-1), libdebian-installer4-udeb (>= 0.55) Description: Miscellaneous utilities for the debian installer Package: choose-mirror Status: install ok installed Version: 2.23 Depends: choose-mirror-bin, configured-network Description: Choose mirror to install from (menu item) Installer-Menu-Item: 2300 Package: input-modules-2.6.22-3-ixp4xx-di Status: install ok unpacked Version: 1.12 Provides: input-modules Depends: kernel-image-2.6.22-3-ixp4xx-di, usb-modules-2.6.22-3-ixp4xx-di Description: Input devices support Package: network-preseed Status: install ok unpacked Version: 1.35 Depends: cdebconf-udeb, configured-network, preseed-common Description: download debconf preseed file Installer-Menu-Item: 2100 Package: usb-modules-2.6.22-3-ixp4xx-di Status: install ok unpacked Version: 1.12 Provides: usb-modules Depends: kernel-image-2.6.22-3-ixp4xx-di Description: USB support Package: cdebconf-newt-udeb Status: install ok unpacked Version: 0.128 Depends: cdebconf-udeb, di-utils-terminfo, libc6 (>= 2.7-1), libnewt0.52, libslang2-udeb (>= 2.0.7-1) Description: Newt frontend for Debian Configuration Management System Package: dhcp3-client-udeb Status: install ok installed Version: 3.1.0-4 Depends: libc6 (>= 2.7-1) Description: DHCP Client for debian-installer Package: core-modules-2.6.22-3-ixp4xx-di Status: install ok unpacked Version: 1.12 Provides: core-modules Depends: kernel-image-2.6.22-3-ixp4xx-di Description: Core modules Package: module-init-tools-udeb Status: install ok unpacked Version: 3.3-pre11-4 Depends: libc6 (>= 2.5-5) Description: tools for managing Linux kernel modules Package: gpgv-udeb Status: install ok installed Version: 1.4.6-2.1 Depends: libc6 (>= 2.7-1), zlib1g-udeb (>= 1:1.2.3.3.dfsg-1) Description: minimal signature verification tool Package: rootskel Status: install ok installed Version: 1.58 Depends: cdebconf-udeb, di-utils (>= 1.43) Description: Skeleton root filesystem used by debian-installer Package: nic-modules-2.6.22-3-ixp4xx-di Status: install ok unpacked Version: 1.12 Provides: nic-modules Depends: core-modules-2.6.22-3-ixp4xx-di, kernel-image-2.6.22-3-ixp4xx-di Description: Common NIC drivers Package: openssh-server-udeb Status: install ok installed Version: 1:4.7p1-4 Depends: libc6 (>= 2.7-1), libcrypto0.9.8-udeb (>= 0.9.8f-1), libgcc1 (>= 1:4.3), libnss-files-udeb, zlib1g-udeb (>= 1:1.2.3.3.dfsg-1) Description: secure shell server for the Debian installer Package: network-console Status: install ok unpacked Version: 1.14 Depends: cdebconf-udeb, configured-network, openssh-server-udeb (>= 1:3.8p1-1) Description: Continue installation remotely using SSH Installer-Menu-Item: 2100 Package: udev-udeb Status: install ok unpacked Version: 0.114-2 Depends: libc6 (>= 2.6-1) Description: /dev/ and hotplug management daemon Package: libnss-files-udeb Status: install ok installed Version: 2.7-9 Description: GNU C Library: NSS helper for files - udeb Package: libcrypto0.9.8-udeb Status: install ok installed Version: 0.9.8g-7 Depends: libc6 (>= 2.7-1), libgcc1 (>= 1:4.3), zlib1g-udeb (>= 1:1.2.3.3.dfsg-1) Description: crypto shared library - udeb Package: libfribidi0-udeb Status: install ok unpacked Version: 0.10.9-1 Depends: libc6 (>= 2.7-1) Description: Free Implementation of the Unicode BiDi algorithm Package: libtextwrap1-udeb Status: install ok installed Version: 0.1-6 Depends: libc6 (>= 2.7-1) Description: text-wrapping library with i18n - runtime udeb Package: auto-install Status: install ok unpacked Version: 1.2 Depends: cdebconf-udeb, netcfg, preseed-common (>= 1.18) Description: Support for automatic installs Installer-Menu-Item: 1900 Package: rescue-check Status: install ok unpacked Version: 1.13 Depends: cdebconf-udeb (>= 0.75), di-utils (>= 1.18), main-menu (>= 1.03) Description: enter d-i rescue mode if requested Package: nano-udeb Status: install ok unpacked Version: 2.0.7-1 Provides: editor Depends: libc6 (>= 2.7-1), libslang2-udeb (>= 2.0.7-1) Description: free Pico clone with some new features - tiny build Package: kernel-image-2.6.22-3-ixp4xx-di Status: install ok unpacked Version: 1.12 Provides: kernel-image, socket-modules Description: Linux kernel binary image for the Debian installer Package: cdebconf-udeb Status: install ok installed Version: 0.128 Provides: debconf-2.0 Depends: libc6 (>= 2.7-1), libdebian-installer4-udeb (>= 0.55), libtextwrap1-udeb Description: Debian Configuration Management System (C-implementation) Package: debian-archive-keyring-udeb Status: install ok installed Version: 2007.07.31 Description: GnuPG keys of the Debian archive Package: ai-choosers Status: install ok unpacked Version: 1.2 Depends: keyboard-setup, localechooser (>= 1.23) Description: Delayed configuration of locale and keyboard for auto-install Installer-Menu-Item: 2200 Package: cdebconf-text-udeb Status: install ok unpacked Version: 0.128 Depends: cdebconf-udeb, libc6 (>= 2.7-1) Description: Plain text frontend for Debian Configuration Management System Package: iso-3166-udeb Status: install ok installed Version: 1.9-1 Description: provides iso_3166.tab file Package: ethdetect Status: install ok installed Version: 1.59 Provides: ethernet-card-detection Depends: cdebconf-udeb (>= 0.38), di-utils (>= 1.13), hw-detect, rootskel (>= 1.30) Description: Detect network hardware and load kernel drivers for it Installer-Menu-Item: 1700 Package: devio-udeb Status: install ok unpacked Version: 1.2-1 Depends: libc6 (>= 2.5) Description: correctly read (or write) a region of a block device Package: busybox-udeb Status: install ok unpacked Version: 1:1.1.3-5 Depends: libc6 (>= 2.5-5), libgcc1 (>= 1:4.2-20070516) Description: Tiny utilities for the debian-installer Package: initrd-preseed Status: install ok unpacked Version: 1.35 Depends: preseed-common Description: load debconf preseed file from /preseed.cfg on the initrd Package: net-retriever Status: install ok installed Version: 1.20 Provides: retriever Depends: cdebconf-udeb, choose-mirror, configured-network, debian-archive-keyring-udeb, di-utils (>= 1.16), gpgv-udeb Description: Fetch modules from the Internet Package: libiw29-udeb Status: install ok installed Version: 29-1 Depends: libc6 (>= 2.6.1-1) Description: Tools for manipulating Linux Wireless Extensions Package: archdetect Status: install ok installed Version: 1.59 Depends: libc6 (>= 2.7-1), libdebian-installer4-udeb (>= 0.55) Description: Hardware architecture detector Package: beep-udeb Status: install ok unpacked Version: 1.2.2-20 Depends: libc6 (>= 2.6.1-1) Description: advanced pc-speaker beeper Package: save-logs Status: install ok unpacked Version: 2.32 Depends: cdebconf-udeb Description: save logs and configuration for debug purposes Installer-Menu-Item: 94000 Package: di-utils-reboot Status: install ok unpacked Version: 1.55 Depends: cdebconf-udeb Description: Reboot Installer-Menu-Item: 99500 Package: anna Status: install ok installed Version: 1.30 Depends: cdebconf-udeb, libc6 (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.55) Description: anna's not nearly apt, but for the Debian installer, it will do Package: choose-mirror-bin Status: install ok installed Version: 2.23 Depends: cdebconf-udeb, libc6 (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.55) Description: Choose mirror to install from (program) Package: pciutils-udeb Status: install ok unpacked Version: 1:2.2.10-1 Depends: libc6 (>= 2.7-1), zlib1g-udeb (>= 1:1.2.3.3.dfsg-1) Description: Linux PCI Utilities (udeb) Package: console-keymaps-at Status: install ok installed Version: 2:1.05-1 Provides: console-keymaps Depends: cdebconf-udeb Description: keymaps for PC-style (PS/2 and AT) keyboards Package: di-utils-terminfo Status: install ok unpacked Version: 1.55 Description: Terminfo entries needed by newt/slang in debian installer Package: hw-detect Status: install ok installed Version: 1.59 Depends: archdetect, cdebconf-udeb (>= 0.75), di-utils (>= 1.48), rootskel (>= 1.30) Description: Detect hardware and load kernel drivers for it Package: kbd-chooser Status: install ok installed Version: 1.43 Provides: keyboard-setup Depends: cdebconf-udeb, console-keymaps, libc6 (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.55) Description: Detect a keyboard and select layout Installer-Menu-Item: 1200 Package: libdebian-installer4-udeb Status: install ok installed Version: 0.56 Depends: libc6 (>= 2.7-1) Description: Library of common debian-installer functions Package: installation-locale Status: install ok unpacked Version: 1.2 Depends: rootskel Description: UTF-8 C locale Package: env-preseed Status: install ok unpacked Version: 1.35 Description: debconf preseeding via environment variables Package: cdebconf-priority Status: install ok unpacked Version: 0.128 Depends: cdebconf-udeb Description: Change debconf priority Installer-Menu-Item: 93000 Package: netcfg Status: install ok installed Version: 1.42 Provides: configured-network Depends: dhcp3-client-udeb (>= 3.1.0-2), ethernet-card-detection, libc6 (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.55), libiw29-udeb (>= 28+29pre7) Description: Configure the network Installer-Menu-Item: 1800 Package: zlib1g-udeb Status: install ok installed Version: 1:1.2.3.3.dfsg-11 Description: compression library - runtime for Debian installer Package: libdebconfclient0-udeb Status: install ok installed Version: 0.128 Depends: cdebconf-udeb, libc6 (>= 2.7-1) Description: Debian Configuration Management System (C-implementation) Package: bogl-bterm-udeb Status: install ok unpacked Version: 0.1.18-1.5 Provides: editor Depends: libc-udeb Description: Ben's Own Graphics Library - graphical terminal Package: nic-usb-modules-2.6.22-3-ixp4xx-di Status: install ok unpacked Version: 1.12 Provides: nic-usb-modules Depends: core-modules-2.6.22-3-ixp4xx-di, kernel-image-2.6.22-3-ixp4xx-di, usb-modules-2.6.22-3-ixp4xx-di Description: USB NIC drivers Package: debian-installer Status: install ok installed Version: ixp4xx-netboot-20080307-20:16 Description: debian installation image Package: apt-mirror-setup Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 144 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1:0.34 Depends: cdebconf-udeb, choose-mirror-bin Description: set up a mirror in sources.list Package: apt-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 120 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1:0.34 Depends: apt-mirror-setup, cdebconf-udeb, installed-base Description: Configure apt Installer-Menu-Item: 7000 Package: base-installer Status: install ok installed Priority: required Section: debian-installer Installed-Size: 124 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.88 Depends: cdebconf-udeb, di-utils (>= 1.48), di-utils-mapdevfs, rootskel (>= 1.19) Description: base system installation framework Package: bootstrap-base Status: install ok installed Priority: required Section: debian-installer Installed-Size: 512 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.88 Depends: archdetect, base-installer, created-fstab, debian-archive-keyring-udeb, debootstrap-udeb (>= 1.0.7), gpgv-udeb, libc6 (>= 2.7-1), libdebconfclient0-udeb, libdebian-installer4-udeb (>= 0.55), mounted-partitions Provides: installed-base, kernel-installer Description: Install the base system Installer-Menu-Item: 6500 Package: clock-setup Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 140 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 0.95 Depends: cdebconf-udeb, configured-network, di-utils, localechooser, rdate-udeb (>= 1:1.1.2-5), tzsetup-udeb (>= 1:0.18) Description: set up clock Installer-Menu-Item: 2600 Package: debootstrap-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 96 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.0.8 Depends: mounted-partitions Description: Bootstrap the Debian system Package: di-utils-mapdevfs Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 16 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.55 Depends: libc6 (>= 2.7-1), libdebian-installer4-udeb (>= 0.55) Description: mapdevfs utility for the debian installer Package: disk-detect Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 52 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.59 Depends: cdebconf-udeb (>= 0.38), di-utils (>= 1.13), hw-detect Provides: harddrive-detection Description: Detect disk drives Installer-Menu-Item: 3500 Package: e2fsprogs-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 460 Maintainer: Theodore Y. Ts'o <[EMAIL PROTECTED]> Version: 1.40.7-1 Depends: libblkid1-udeb, libc6 (>= 2.7-1), libgcc1 (>= 1:4.3) Description: stripped-down versions of e2fsprogs, for debian-installer This package is an e2fsprogs package built for a reduced size, so that it can help to save space in debian-installer. . Don't attempt to install this package, it has no support for a couple of features you surely want. Anyway it should refuse to install. Package: ext2-modules-2.6.22-3-ixp4xx-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 116 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.12 Depends: core-modules-2.6.22-3-ixp4xx-di, kernel-image-2.6.22-3-ixp4xx-di Provides: ext2-modules Description: EXT2 filesystem support This package contains the EXT2 filesystem module for the Linux kernel. Package: ext3-modules-2.6.22-3-ixp4xx-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 268 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.12 Depends: core-modules-2.6.22-3-ixp4xx-di, kernel-image-2.6.22-3-ixp4xx-di Provides: ext3-modules Description: EXT3 filesystem support This package contains the EXT3 filesystem module for the Linux kernel. Package: fat-modules-2.6.22-3-ixp4xx-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 140 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.12 Depends: kernel-image-2.6.22-3-ixp4xx-di Provides: fat-modules Description: FAT filesystem support This package contains the FAT and VFAT filesystem modules for the Linux kernel. Package: finish-install Status: install ok unpacked Priority: required Section: debian-installer Installed-Size: 84 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 2.15 Depends: archdetect, bootable-system, cdebconf-udeb, created-fstab, installed-base Description: Finish the installation and reboot Installer-Menu-Item: 7800 Package: flash-kernel-installer Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 36 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.7 Depends: cdebconf-udeb, installed-base Provides: bootable-system Description: Configure flash to boot the system Installer-Menu-Item: 7300 Package: libblkid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 48 Maintainer: Theodore Y. Ts'o <[EMAIL PROTECTED]> Version: 1.40.7-1 Depends: libc6 (>= 2.7-1), libgcc1 (>= 1:4.3) Description: block device id library The blkid library which allows system programs like fsck and mount to quickly and easily find block devices by filesystem UUID and LABEL. This allows system administrators to avoid specifiying filesystems by hard-coded device names, but via a logical naming system instead. . This is a minimal package for debian-installer. Package: libc6-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 2168 Maintainer: GNU Libc Maintainers <[EMAIL PROTECTED]> Version: 2.7-9 Provides: glibc-2.7-1, libc-udeb, libc6 Description: GNU C Library: Shared libraries - udeb Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. . This package contains a minimal set of libraries needed for the Debian installer. Do not install it on a normal system. Package: libparted1.7-udeb Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 372 Maintainer: Parted Maintainer Team <[EMAIL PROTECTED]> Version: 1.7.1-5.1 Depends: libc6 (>= 2.5), libgcc1 (>= 1:4.1.1-12), libuuid1-udeb Provides: libparted1.7-1 Description: The GNU Parted disk partitioning shared library GNU Parted is a program that allows you to create, destroy, resize, move and copy hard disk partitions. This is useful for creating space for new operating systems, reorganising disk usage, and copying data to new hard disks. This package contains the Parted binary and manual page. . This package contains libparted, the required shared library used by Parted. This is a cut-down package with no normal documentation intended to be used in debian-installer. . Parted currently supports DOS, Mac, Sun, BSD, GPT, MIPS and PC98 disklabels/partition tables, as well as a 'loop' (raw disk) type which allows use on RAID/LVM. Filesystems which are currently fully supported are ext2, ext3, fat (FAT16 and FAT32), ReiserFS (with libreiserfs) and linux-swap. Parted can also detect and remove HFS (Mac OS), JFS, NTFS, UFS (Sun and HP), XFS and ASFS/AFFS/APFS (Amiga) filesystems, but cannot create, resize or check these filesystems yet. . Note that ReiserFS support is only enabled if you install the libreiserfs0.3-0 package. Since libreiserfs0.3-0 has been removed from sarge, ReiserFS support is not compiled in the default package. . The nature of this software means that any bugs could cause massive data loss. While there are no known bugs at the moment, they could exist, so please back up all important files before running it, and do so at your own risk. Package: libuuid1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 28 Maintainer: Theodore Y. Ts'o <[EMAIL PROTECTED]> Version: 1.40.7-1 Depends: libc6 (>= 2.7-1), libgcc1 (>= 1:4.3) Description: universally unique id library libuuid generates and parses 128-bit universally unique id's (UUID's). See RFC 4122 for more information. . This is a minimal package for debian-installer. Package: localechooser Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 384 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.46 Depends: cdebconf-udeb, di-utils (>= 1.15), iso-3166-udeb Description: choose language/country/locale Installer-Menu-Item: 1000 Package: lowmem Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 12 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.27 Description: free memory for lowmem install Installer-Menu-Item: 2500 Package: nobootloader Status: install ok unpacked Priority: standard Section: debian-installer Installed-Size: 176 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.20 Depends: cdebconf-udeb, di-utils-mapdevfs, installed-base Provides: bootable-system Description: Don't install any bootloader. This package will skip installing a boot-loader Installer-Menu-Item: 7700 Package: partman-auto Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 344 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 75 Depends: cdebconf-udeb, di-utils, partman-base (>= 114), partman-basicfilesystems, partman-ext3 Description: Automatically partition storage devices (partman) Package: partman-base Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 784 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 116 Depends: archdetect, cdebconf-udeb, di-utils (>= 1.15), di-utils-mapdevfs, harddrive-detection, libc6 (>= 2.7-1), libgcc1 (>= 1:4.3), libparted1.7-udeb (>= 1.7.1-1), partman-partitioning (>= 54), partman-target, partman-utils Provides: created-fstab, made-filesystems, mounted-partitions, partitioned-harddrives Description: Partition the storage devices (partman) Installer-Menu-Item: 4200 Package: partman-basicfilesystems Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 592 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 58 Depends: cdebconf-udeb, di-utils (>= 1.14), e2fsprogs-udeb, ext2-modules, fat-modules Provides: partman-filesystem Description: Add to partman support for ext2, linux-swap, fat16 and fat32 Package: partman-basicmethods Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 84 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 38 Depends: cdebconf-udeb Provides: partman-method Description: Basic partition usage methods for partman This package provides partman with two methods to use partitions. The first is to format the partition. The second is to keep and use the existing data in the partition as it is. Package: partman-ext3 Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 172 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 50 Depends: cdebconf-udeb, di-utils (>= 1.14), e2fsprogs-udeb, ext3-modules, partman-basicfilesystems Provides: partman-filesystem Description: Add to partman support for ext3 Package: partman-partitioning Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 564 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 57 Depends: cdebconf-udeb, e2fsprogs-udeb Description: Partitioning operations for partman This udeb provides partman with editing operations for creation of new partitions, deletion of partitions and initialisation of the partition table. Package: partman-target Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 292 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 54 Depends: cdebconf-udeb, di-utils-mapdevfs, partman-basicfilesystems, partman-basicmethods Description: Provides partman with ability to prepare /target This udeb allows the user to choose how partitions should be used. Package: partman-utils Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 20 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 116 Depends: libc6 (>= 2.7-1), libparted1.7-udeb (>= 1.7.1-1) Description: Utilities related to partitioning Package: pkgsel Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 56 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 0.18 Depends: apt-setup-udeb, cdebconf-udeb, di-utils (>= 1.20) Description: Select and install packages Installer-Menu-Item: 7000 Package: rdate-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 32 Maintainer: Anibal Monsalve Salazar <[EMAIL PROTECTED]> Version: 1:1.1.3-1 Depends: libc6 (>= 2.7-1) Description: sets the system's date from a remote host Package: scsi-core-modules-2.6.22-3-ixp4xx-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 208 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.12 Depends: kernel-image-2.6.22-3-ixp4xx-di Provides: scsi-core-modules Description: Core SCSI subsystem This package contains the core SCSI subsystem for the Linux kernel. Package: tzsetup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 268 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1:0.20 Depends: cdebconf-udeb, localechooser Description: choose time zone Package: usb-storage-modules-2.6.22-3-ixp4xx-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 140 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.12 Depends: kernel-image-2.6.22-3-ixp4xx-di, scsi-core-modules-2.6.22-3-ixp4xx-di, usb-modules-2.6.22-3-ixp4xx-di Provides: usb-storage-modules Description: USB storage support This package contains the USB storage driver for the Linux kernel. Package: user-setup-udeb Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 332 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.19 Depends: cdebconf-udeb Description: Set up users and passwords Installer-Menu-Item: 6900 Package: libdevmapper1.02.1-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 96 Maintainer: Debian LVM Team <[EMAIL PROTECTED]> Version: 2:1.02.24-3 Depends: libc6 (>= 2.7-1) Description: The Linux Kernel Device Mapper userspace library This is a udeb, or a microdeb, for the debian-installer. . The Linux Kernel Device Mapper is the LVM (Linux Logical Volume Management) Team's implementation of a minimalistic kernel-space driver that handles volume management, while keeping knowledge of the underlying device layout in user-space. This makes it useful for not only LVM, but EVMS, software raid, and other drivers that create "virtual" block devices. Package: lvm2-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 536 Maintainer: Debian LVM Team <[EMAIL PROTECTED]> Version: 2.02.33-1 Depends: libc6 (>= 2.7-1), libdevmapper1.02.1-udeb (>= 2:1.02.24), libgcc1 (>= 1:4.3) Description: The Linux Logical Volume Manager This is a udeb, or a microdeb, for the debian-installer. . This is LVM2, the rewrite of The Linux Logical Volume Manager. LVM supports enterprise level volume management of disk and disk subsystems by grouping arbitrary disks into volume groups. The total capacity of volume groups can be allocated to logical volumes, which are accessed as regular block devices. Package: md-modules-2.6.22-3-ixp4xx-di Status: install ok installed Priority: extra Section: debian-installer Installed-Size: 484 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.12 Depends: kernel-image-2.6.22-3-ixp4xx-di Provides: md-modules Description: RAID and LVM support This package contains RAID and LVM modules for the Linux kernel. Package: partman-auto-lvm Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 132 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 26 Depends: cdebconf-udeb, di-utils (>= 1.15), partman-auto (>= 74), partman-base (>= 114), partman-lvm (>= 58) Description: Automatically partition storage devices using LVM Package: partman-lvm Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 724 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 59 Depends: cdebconf-udeb, di-utils (>= 1.14), lvm2-udeb, md-modules, partman-base (>= 114) Description: Adds support for LVM to partman Package: os-prober-udeb Status: install ok installed Priority: optional Section: debian-installer Installed-Size: 104 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.24 Depends: anna (>= 1.16), di-utils-mapdevfs Provides: os-prober Description: utility to detect other OSes on a set of drives This package is to be used by boot loader installers to detect other OSes available on a system, in a generic format, which it can then adapt to its own configuration format. Package: reiserfs-modules-2.6.22-3-ixp4xx-di Status: install ok installed Priority: standard Section: debian-installer Installed-Size: 324 Maintainer: Debian Install System Team <[EMAIL PROTECTED]> Version: 1.12 Depends: kernel-image-2.6.22-3-ixp4xx-di Provides: reiserfs-modules Description: Reiser filesystem support This package contains the Reiser filesystem module for the Linux kernel. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: armel (armv5tel) Kernel: Linux 2.6.24-1-ixp4xx Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
