Package: nut-hal-drivers
Version: 2.2.1-2
Severity: important
I'm trying to use nut-hal-drivers with my PowerWare UPS. During
post-installation, udevd is restarted successfully, but debconf hangs.
Here's ps axf output:
14735 pts/5 Ss 0:00 \_ bash
15085 pts/5 S+ 0:00 \_ dpkg --configure -a
15267 pts/5 S+ 0:00 \_ /usr/bin/perl -w
/usr/share/debconf/frontend /var/lib/dpkg/info/nut-hal-drivers.postinst
configure
15273 pts/5 Z+ 0:00 \_ [nut-hal-drivers] <defunct>
Interestingly, gnome-power-manager recognizes (through HAL, I presume)
that I have a UPS if I've installed nut-hal-drivers, despite
interrupting this configuration step. It does not do so once I remove
nut-hal-drivers. Here's lsusb -v output:
Bus 001 Device 006: ID 0592:0002 Powerware Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0592 Powerware Corp.
idProduct 0x0002
bcdDevice 0.80
iManufacturer 1 Powerware
iProduct 2 Powerware UPS
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
** UNRECOGNIZED: 09 21 10 01 00 01 22 00 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 20
Device Status: 0x0000
(Bus Powered)
and here's the lshal output:
udi = '/org/freedesktop/Hal/devices/usb_device_592_2_noserial'
ac_adaptor.present = true (bool)
battery.charge_level.design = 100 (0x64) (int)
battery.charge_level.last_full = 100 (0x64) (int)
battery.charge_level.unit = 'percent' (string)
battery.is_rechargeable = true (bool)
battery.model = 'POWERWARE UPS 700VA' (string)
battery.present = true (bool)
battery.rechargeable.is_charging = true (bool)
battery.rechargeable.is_discharging = false (bool)
battery.reporting.design = 100 (0x64) (int)
battery.reporting.last_full = 100 (0x64) (int)
battery.reporting.unit = 'percent' (string)
battery.serial = '' (string)
battery.type = 'ups' (string)
battery.voltage.unit = 'V' (string)
info.addons = {'hald-addon-bcmxcp_usb'} (string list)
info.bus = 'usb_device' (string)
info.capabilities = {'battery', 'ac_adaptor'} (string list)
info.category = 'battery' (string)
info.is_recalled = false (bool)
info.linux.driver = 'usb' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_1d6b_1_0000_00_1a_0'
(string)
info.product = 'Powerware UPS' (string)
info.subsystem = 'usb_device' (string)
info.udi = '/org/freedesktop/Hal/devices/usb_device_592_2_noserial' (string)
info.vendor = 'Powerware Corp.' (string)
linux.device_file = '/dev/bus/usb/001/006' (string)
linux.hotplug_type = 2 (0x2) (int)
linux.subsystem = 'usb' (string)
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1' (string)
usb_device.bus_number = 1 (0x1) (int)
usb_device.can_wake_up = true (bool)
usb_device.configuration_value = 1 (0x1) (int)
usb_device.device_class = 0 (0x0) (int)
usb_device.device_protocol = 0 (0x0) (int)
usb_device.device_revision_bcd = 128 (0x80) (int)
usb_device.device_subclass = 0 (0x0) (int)
usb_device.is_self_powered = true (bool)
usb_device.linux.device_number = 6 (0x6) (int)
usb_device.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1'
(string)
usb_device.max_power = 2 (0x2) (int)
usb_device.num_configurations = 1 (0x1) (int)
usb_device.num_interfaces = 1 (0x1) (int)
usb_device.num_ports = 0 (0x0) (int)
usb_device.product = 'Powerware UPS' (string)
usb_device.product_id = 2 (0x2) (int)
usb_device.speed = 1.5 (1.5) (double)
usb_device.speed_bcd = 336 (0x150) (int)
usb_device.vendor = 'Powerware Corp.' (string)
usb_device.vendor_id = 1426 (0x592) (int)
usb_device.version = 2.0 (2) (double)
usb_device.version_bcd = 512 (0x200) (int)
udi = '/org/freedesktop/Hal/devices/usb_device_592_2_noserial_if0'
info.bus = 'usb' (string)
info.linux.driver = 'usbfs' (string)
info.parent = '/org/freedesktop/Hal/devices/usb_device_592_2_noserial'
(string)
info.product = 'USB Vendor Specific Interface' (string)
info.subsystem = 'usb' (string)
--
usb.linux.device_number = 6 (0x6) (int)
usb.linux.sysfs_path =
'/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1:1.0' (string)
usb.max_power = 2 (0x2) (int)
usb.num_configurations = 1 (0x1) (int)
usb.num_interfaces = 1 (0x1) (int)
usb.num_ports = 0 (0x0) (int)
usb.product = 'USB Vendor Specific Interface' (string)
usb.product_id = 2 (0x2) (int)
usb.speed = 1.5 (1.5) (double)
usb.speed_bcd = 336 (0x150) (int)
usb.vendor = 'Powerware Corp.' (string)
usb.vendor_id = 1426 (0x592) (int)
usb.version = 2.0 (2) (double)
usb.version_bcd = 512 (0x200) (int)
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.25-rc4 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages nut-hal-drivers depends on:
ii libc6 2.7-9 GNU C Library: Shared libraries
ii libdbus-1-3 1.1.20-1 simple interprocess messaging syst
ii libdbus-glib-1-2 0.74-1 simple interprocess messaging syst
ii libglib2.0-0 2.14.6-1 The GLib library of C routines
ii libhal1 0.5.10+git20080301-1 Hardware Abstraction Layer - share
ii libusb-0.1-4 2:0.1.12-9 userspace USB programming library
nut-hal-drivers recommends no packages.
-- no debconf information
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
