On Mon, Feb 11, 2008 at 11:21:46PM +0100, maximilian attems wrote: || On Wed, 06 Feb 2008, Vincent Zweije wrote:
|| > Reportbug asked for 2.6.24-2 but I didn't see that on || > packages.debian.org, so this is for 2.6.24-1. || || thanks for the quick feedback! || || did you try booting with the bootparam irqpoll? || via boxes are missing upstream specs, thus.. Startup log attached. Irqpoll is not fun for daily operations: the system becomes far too slow. Furthermore a cdrom window (sound juicer) keeps popping up now, and hdc failures are being spewed all over the place. I suspect the via interrupt is now being interpreted as a spurious hdc interrupt or something. || you may want to sign and propagate || http://www.petitiononline.com/vialinux/ Sounds good on principle, though the actual effect would seem dubitable. Ciao. Vincent. -- Vincent Zweije <[EMAIL PROTECTED]> | "If you're flamed in a group you <http://www.xs4all.nl/~zweije/> | don't read, does anybody get burnt?" [Xhost should be taken out and shot] | -- Paul Tomblin on a.s.r.
Feb 12 23:05:17 arrow syslogd 1.5.0#1.1: restart.
Feb 12 23:05:17 arrow kernel: klogd 1.5.0#1.1, log source = /proc/kmsg started.
Feb 12 23:05:17 arrow kernel: Initializing cgroup subsys cpuset
Feb 12 23:05:17 arrow kernel: Linux version 2.6.24-1-686 (Debian 2.6.24-2)
([EMAIL PROTECTED]) (gcc version 4.1.3 20080114 (prerelease) (Debian 4.1.2-19))
#1 SMP Thu Jan 31 20:35:50 UTC 2008
Feb 12 23:05:17 arrow kernel: BIOS-provided physical RAM map:
Feb 12 23:05:17 arrow kernel: BIOS-e820: 0000000000000000 - 000000000009f800
(usable)
Feb 12 23:05:17 arrow kernel: BIOS-e820: 000000000009f800 - 00000000000a0000
(reserved)
Feb 12 23:05:17 arrow kernel: BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
Feb 12 23:05:17 arrow kernel: BIOS-e820: 0000000000100000 - 000000001bff0000
(usable)
Feb 12 23:05:17 arrow kernel: BIOS-e820: 000000001bff0000 - 000000001bff3000
(ACPI NVS)
Feb 12 23:05:17 arrow kernel: BIOS-e820: 000000001bff3000 - 000000001c000000
(ACPI data)
Feb 12 23:05:17 arrow kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000
(reserved)
Feb 12 23:05:17 arrow kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000
(reserved)
Feb 12 23:05:17 arrow kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000
(reserved)
Feb 12 23:05:17 arrow kernel: 0MB HIGHMEM available.
Feb 12 23:05:17 arrow kernel: 447MB LOWMEM available.
Feb 12 23:05:17 arrow kernel: found SMP MP-table at 000f5a50
Feb 12 23:05:17 arrow kernel: Entering add_active_range(0, 0, 114672) 0 entries
of 256 used
Feb 12 23:05:17 arrow kernel: Zone PFN ranges:
Feb 12 23:05:17 arrow kernel: DMA 0 -> 4096
Feb 12 23:05:17 arrow kernel: Normal 4096 -> 114672
Feb 12 23:05:17 arrow kernel: HighMem 114672 -> 114672
Feb 12 23:05:17 arrow kernel: Movable zone start PFN for each node
Feb 12 23:05:17 arrow kernel: early_node_map[1] active PFN ranges
Feb 12 23:05:17 arrow kernel: 0: 0 -> 114672
Feb 12 23:05:17 arrow kernel: On node 0 totalpages: 114672
Feb 12 23:05:17 arrow kernel: DMA zone: 32 pages used for memmap
Feb 12 23:05:17 arrow kernel: DMA zone: 0 pages reserved
Feb 12 23:05:17 arrow kernel: DMA zone: 4064 pages, LIFO batch:0
Feb 12 23:05:17 arrow kernel: Normal zone: 863 pages used for memmap
Feb 12 23:05:17 arrow kernel: Normal zone: 109713 pages, LIFO batch:31
Feb 12 23:05:17 arrow kernel: HighMem zone: 0 pages used for memmap
Feb 12 23:05:17 arrow kernel: Movable zone: 0 pages used for memmap
Feb 12 23:05:17 arrow kernel: DMI 2.3 present.
Feb 12 23:05:17 arrow kernel: ACPI: RSDP 000F76E0, 0014 (r0 VIAK8 )
Feb 12 23:05:17 arrow kernel: ACPI: RSDT 1BFF3000, 002C (r1 VIAK8 AWRDACPI
42302E31 AWRD 1010101)
Feb 12 23:05:17 arrow kernel: ACPI: FACP 1BFF3040, 0074 (r1 VIAK8 AWRDACPI
42302E31 AWRD 1010101)
Feb 12 23:05:17 arrow kernel: ACPI: DSDT 1BFF30C0, 45DC (r1 VIAK8 AWRDACPI
1000 MSFT 100000C)
Feb 12 23:05:17 arrow kernel: ACPI: FACS 1BFF0000, 0040
Feb 12 23:05:17 arrow kernel: ACPI: APIC 1BFF76C0, 005A (r1 VIAK8 AWRDACPI
42302E31 AWRD 1010101)
Feb 12 23:05:17 arrow kernel: ACPI: PM-Timer IO Port: 0x4008
Feb 12 23:05:17 arrow kernel: ACPI: Local APIC address 0xfee00000
Feb 12 23:05:17 arrow kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Feb 12 23:05:17 arrow kernel: Processor #0 15:12 APIC version 16
Feb 12 23:05:17 arrow kernel: ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
Feb 12 23:05:17 arrow kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000]
gsi_base[0])
Feb 12 23:05:17 arrow kernel: IOAPIC[0]: apic_id 2, version 3, address
0xfec00000, GSI 0-23
Feb 12 23:05:17 arrow kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2
dfl dfl)
Feb 12 23:05:17 arrow kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9
low level)
Feb 12 23:05:17 arrow kernel: ACPI: IRQ0 used by override.
Feb 12 23:05:17 arrow kernel: ACPI: IRQ2 used by override.
Feb 12 23:05:17 arrow kernel: ACPI: IRQ9 used by override.
Feb 12 23:05:17 arrow kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
Feb 12 23:05:17 arrow kernel: Using ACPI (MADT) for SMP configuration
information
Feb 12 23:05:17 arrow kernel: Allocating PCI resources starting at 20000000
(gap: 1c000000:e2c00000)
Feb 12 23:05:17 arrow kernel: swsusp: Registered nosave memory region:
000000000009f000 - 00000000000a0000
Feb 12 23:05:17 arrow kernel: swsusp: Registered nosave memory region:
00000000000a0000 - 00000000000f0000
Feb 12 23:05:17 arrow kernel: swsusp: Registered nosave memory region:
00000000000f0000 - 0000000000100000
Feb 12 23:05:17 arrow kernel: Built 1 zonelists in Zone order, mobility
grouping on. Total pages: 113777
Feb 12 23:05:17 arrow kernel: Kernel command line: root=/dev/hda7 ro irqpoll
Feb 12 23:05:17 arrow kernel: Misrouted IRQ fixup and polling support enabled
Feb 12 23:05:17 arrow kernel: This may significantly impact system performance
Feb 12 23:05:17 arrow kernel: mapped APIC to ffffb000 (fee00000)
Feb 12 23:05:17 arrow kernel: mapped IOAPIC to ffffa000 (fec00000)
Feb 12 23:05:17 arrow kernel: Enabling fast FPU save and restore... done.
Feb 12 23:05:17 arrow kernel: Enabling unmasked SIMD FPU exception support...
done.
Feb 12 23:05:17 arrow kernel: Initializing CPU#0
Feb 12 23:05:17 arrow kernel: PID hash table entries: 2048 (order: 11, 8192
bytes)
Feb 12 23:05:17 arrow kernel: Detected 1808.338 MHz processor.
Feb 12 23:05:17 arrow kernel: Console: colour VGA+ 80x25
Feb 12 23:05:17 arrow kernel: console [tty0] enabled
Feb 12 23:05:17 arrow kernel: Dentry cache hash table entries: 65536 (order: 6,
262144 bytes)
Feb 12 23:05:17 arrow kernel: Inode-cache hash table entries: 32768 (order: 5,
131072 bytes)
Feb 12 23:05:17 arrow kernel: Memory: 445676k/458688k available (1785k kernel
code, 12448k reserved, 715k data, 248k init, 0k highmem)
Feb 12 23:05:17 arrow kernel: virtual kernel memory layout:
Feb 12 23:05:17 arrow kernel: fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
Feb 12 23:05:17 arrow kernel: pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Feb 12 23:05:17 arrow kernel: vmalloc : 0xdc800000 - 0xff7fe000 ( 559 MB)
Feb 12 23:05:17 arrow kernel: lowmem : 0xc0000000 - 0xdbff0000 ( 447 MB)
Feb 12 23:05:17 arrow kernel: .init : 0xc0377000 - 0xc03b5000 ( 248 kB)
Feb 12 23:05:17 arrow kernel: .data : 0xc02be755 - 0xc0371384 ( 715 kB)
Feb 12 23:05:17 arrow kernel: .text : 0xc0100000 - 0xc02be755 (1785 kB)
Feb 12 23:05:17 arrow kernel: Checking if this processor honours the WP bit
even in supervisor mode... Ok.
Feb 12 23:05:17 arrow kernel: Calibrating delay using timer specific routine..
3626.49 BogoMIPS (lpj=7252988)
Feb 12 23:05:17 arrow kernel: Security Framework initialized
Feb 12 23:05:17 arrow kernel: SELinux: Disabled at boot.
Feb 12 23:05:17 arrow kernel: Capability LSM initialized
Feb 12 23:05:17 arrow kernel: Mount-cache hash table entries: 512
Feb 12 23:05:17 arrow kernel: Initializing cgroup subsys ns
Feb 12 23:05:17 arrow kernel: Initializing cgroup subsys cpuacct
Feb 12 23:05:17 arrow kernel: CPU: After generic identify, caps: 078bfbff
e3d3fbff 00000000 00000000 00000001 00000000 00000001 00000000
Feb 12 23:05:17 arrow kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K
(64 bytes/line)
Feb 12 23:05:17 arrow kernel: CPU: L2 Cache: 128K (64 bytes/line)
Feb 12 23:05:17 arrow kernel: CPU: After all inits, caps: 078bfbff e3d3fbff
00000000 00000410 00000001 00000000 00000001 00000000
Feb 12 23:05:17 arrow kernel: Intel machine check architecture supported.
Feb 12 23:05:17 arrow kernel: Intel machine check reporting enabled on CPU#0.
Feb 12 23:05:17 arrow kernel: Compat vDSO mapped to ffffe000.
Feb 12 23:05:17 arrow kernel: Checking 'hlt' instruction... OK.
Feb 12 23:05:17 arrow kernel: SMP alternatives: switching to UP code
Feb 12 23:05:17 arrow kernel: Freeing SMP alternatives: 11k freed
Feb 12 23:05:17 arrow kernel: ACPI: Core revision 20070126
Feb 12 23:05:17 arrow kernel: CPU0: AMD Sempron(tm) Processor 3000+ stepping 02
Feb 12 23:05:17 arrow kernel: Total of 1 processors activated (3626.49
BogoMIPS).
Feb 12 23:05:17 arrow kernel: ENABLING IO-APIC IRQs
Feb 12 23:05:17 arrow kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
Feb 12 23:05:17 arrow kernel: Brought up 1 CPUs
Feb 12 23:05:17 arrow kernel: net_namespace: 64 bytes
Feb 12 23:05:17 arrow kernel: Booting paravirtualized kernel on bare hardware
Feb 12 23:05:17 arrow kernel: NET: Registered protocol family 16
Feb 12 23:05:17 arrow kernel: ACPI: bus type pci registered
Feb 12 23:05:17 arrow kernel: PCI: PCI BIOS revision 2.10 entry at 0xfbae0,
last bus=1
Feb 12 23:05:17 arrow kernel: PCI: Using configuration type 1
Feb 12 23:05:17 arrow kernel: Setting up standard PCI resources
Feb 12 23:05:17 arrow kernel: ACPI: EC: Look up EC in DSDT
Feb 12 23:05:17 arrow kernel: ACPI: Interpreter enabled
Feb 12 23:05:17 arrow kernel: ACPI: (supports S0 S3 S4 S5)
Feb 12 23:05:17 arrow kernel: ACPI: Using IOAPIC for interrupt routing
Feb 12 23:05:17 arrow kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Routing Table
[\_SB_.PCI0._PRT]
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10
11 12)
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10
11 12) *5
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10
*11 12)
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10
11 12) *0, disabled.
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10
11 12) *0, disabled.
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10
11 12) *0, disabled.
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10
11 12) *0, disabled.
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10
11 12) *0, disabled.
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0,
disabled.
Feb 12 23:05:17 arrow kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Feb 12 23:05:17 arrow kernel: pnp: PnP ACPI init
Feb 12 23:05:17 arrow kernel: ACPI: bus type pnp registered
Feb 12 23:05:17 arrow kernel: pnp: PnP ACPI: found 11 devices
Feb 12 23:05:17 arrow kernel: ACPI: ACPI bus type pnp unregistered
Feb 12 23:05:17 arrow kernel: PnPBIOS: Disabled by ACPI PNP
Feb 12 23:05:17 arrow kernel: PCI: Using ACPI for IRQ routing
Feb 12 23:05:17 arrow kernel: PCI: If a device doesn't work, try
"pci=routeirq". If it helps, post a report
Feb 12 23:05:17 arrow kernel: NET: Registered protocol family 8
Feb 12 23:05:17 arrow kernel: NET: Registered protocol family 20
Feb 12 23:05:17 arrow kernel: ACPI: RTC can wake from S4
Feb 12 23:05:17 arrow kernel: Time: tsc clocksource has been installed.
Feb 12 23:05:17 arrow kernel: system 00:00: iomem range 0xcc000-0xd3fff has
been reserved
Feb 12 23:05:17 arrow kernel: system 00:00: iomem range 0xf0000-0xf7fff could
not be reserved
Feb 12 23:05:17 arrow kernel: system 00:00: iomem range 0xf8000-0xfbfff could
not be reserved
Feb 12 23:05:17 arrow kernel: system 00:00: iomem range 0xfc000-0xfffff could
not be reserved
Feb 12 23:05:17 arrow kernel: system 00:00: iomem range 0x1bff0000-0x1bffffff
could not be reserved
Feb 12 23:05:17 arrow kernel: system 00:00: iomem range 0xffff0000-0xffffffff
could not be reserved
Feb 12 23:05:17 arrow kernel: system 00:00: iomem range 0x0-0x9ffff could not
be reserved
Feb 12 23:05:17 arrow kernel: system 00:00: iomem range 0x100000-0x1bfeffff
could not be reserved
Feb 12 23:05:17 arrow kernel: system 00:00: iomem range 0x1c000000-0x1fffffff
has been reserved
Feb 12 23:05:17 arrow kernel: system 00:00: iomem range 0xfec00000-0xfec00fff
could not be reserved
Feb 12 23:05:17 arrow kernel: system 00:00: iomem range 0xfee00000-0xfee00fff
could not be reserved
Feb 12 23:05:17 arrow kernel: system 00:00: iomem range 0xfff80000-0xfffeffff
has been reserved
Feb 12 23:05:17 arrow kernel: system 00:02: ioport range 0x4000-0x407f has been
reserved
Feb 12 23:05:17 arrow kernel: system 00:02: ioport range 0x40f0-0x40ff has been
reserved
Feb 12 23:05:17 arrow kernel: system 00:02: ioport range 0x5000-0x500f has been
reserved
Feb 12 23:05:17 arrow kernel: system 00:03: ioport range 0x4d0-0x4d1 has been
reserved
Feb 12 23:05:17 arrow kernel: system 00:03: ioport range 0x290-0x29f has been
reserved
Feb 12 23:05:17 arrow kernel: system 00:03: ioport range 0x800-0x805 has been
reserved
Feb 12 23:05:17 arrow kernel: PCI: Bridge: 0000:00:01.0
Feb 12 23:05:17 arrow kernel: IO window: disabled.
Feb 12 23:05:17 arrow kernel: MEM window: dc000000-ddffffff
Feb 12 23:05:17 arrow kernel: PREFETCH window: d8000000-dbffffff
Feb 12 23:05:17 arrow kernel: PCI: Setting latency timer of device 0000:00:01.0
to 64
Feb 12 23:05:17 arrow kernel: NET: Registered protocol family 2
Feb 12 23:05:17 arrow kernel: IP route cache hash table entries: 4096 (order:
2, 16384 bytes)
Feb 12 23:05:17 arrow kernel: TCP established hash table entries: 16384 (order:
5, 131072 bytes)
Feb 12 23:05:17 arrow kernel: TCP bind hash table entries: 16384 (order: 5,
131072 bytes)
Feb 12 23:05:17 arrow kernel: TCP: Hash tables configured (established 16384
bind 16384)
Feb 12 23:05:17 arrow kernel: TCP reno registered
Feb 12 23:05:17 arrow kernel: checking if image is initramfs... it is
Feb 12 23:05:17 arrow kernel: Switched to high resolution mode on CPU 0
Feb 12 23:05:17 arrow kernel: Freeing initrd memory: 5330k freed
Feb 12 23:05:17 arrow kernel: audit: initializing netlink socket (disabled)
Feb 12 23:05:17 arrow kernel: audit(1202853895.796:1): initialized
Feb 12 23:05:17 arrow kernel: Total HugeTLB memory allocated, 0
Feb 12 23:05:17 arrow kernel: VFS: Disk quotas dquot_6.5.1
Feb 12 23:05:17 arrow kernel: Dquot-cache hash table entries: 1024 (order 0,
4096 bytes)
Feb 12 23:05:17 arrow kernel: io scheduler noop registered
Feb 12 23:05:17 arrow kernel: io scheduler anticipatory registered
Feb 12 23:05:17 arrow kernel: io scheduler deadline registered
Feb 12 23:05:17 arrow kernel: io scheduler cfq registered (default)
Feb 12 23:05:17 arrow kernel: PCI: VIA PCI bridge detected. Disabling DAC.
Feb 12 23:05:17 arrow kernel: Boot video device is 0000:01:00.0
Feb 12 23:05:17 arrow kernel: isapnp: Scanning for PnP cards...
Feb 12 23:05:17 arrow kernel: isapnp: No Plug & Play device found
Feb 12 23:05:17 arrow kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4
ports, IRQ sharing enabled
Feb 12 23:05:17 arrow kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a
16550A
Feb 12 23:05:17 arrow kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a
16550A
Feb 12 23:05:17 arrow kernel: 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Feb 12 23:05:17 arrow kernel: 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Feb 12 23:05:17 arrow kernel: RAMDISK driver initialized: 16 RAM disks of 8192K
size 1024 blocksize
Feb 12 23:05:17 arrow kernel: PNP: No PS/2 controller found. Probing ports
directly.
Feb 12 23:05:17 arrow kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Feb 12 23:05:17 arrow kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Feb 12 23:05:17 arrow kernel: mice: PS/2 mouse device common for all mice
Feb 12 23:05:17 arrow kernel: cpuidle: using governor ladder
Feb 12 23:05:17 arrow kernel: cpuidle: using governor menu
Feb 12 23:05:17 arrow kernel: TCP bic registered
Feb 12 23:05:17 arrow kernel: NET: Registered protocol family 1
Feb 12 23:05:17 arrow kernel: NET: Registered protocol family 17
Feb 12 23:05:17 arrow kernel: Using IPI No-Shortcut mode
Feb 12 23:05:17 arrow kernel: registered taskstats version 1
Feb 12 23:05:17 arrow kernel: Freeing unused kernel memory: 248k freed
Feb 12 23:05:17 arrow kernel: Uniform Multi-Platform E-IDE driver Revision:
7.00alpha2
Feb 12 23:05:17 arrow kernel: ide: Assuming 33MHz system bus speed for PIO
modes; override with idebus=xx
Feb 12 23:05:17 arrow kernel: SCSI subsystem initialized
Feb 12 23:05:17 arrow kernel: VP_IDE: IDE controller (0x1106:0x0571 rev 0x06)
at PCI slot 0000:00:0f.1
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ
0, using IRQ 20
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt 0000:00:0f.1[A] -> Link
[ALKA] -> GSI 20 (level, low) -> IRQ 16
Feb 12 23:05:17 arrow kernel: VP_IDE: not 100% native mode: will probe irqs
later
Feb 12 23:05:17 arrow kernel: VP_IDE: VIA vt8237 (rev 00) IDE UDMA133
controller on pci0000:00:0f.1
Feb 12 23:05:17 arrow kernel: ide0: BM-DMA at 0xa800-0xa807, BIOS settings:
hda:pio, hdb:pio
Feb 12 23:05:17 arrow kernel: ide1: BM-DMA at 0xa808-0xa80f, BIOS settings:
hdc:pio, hdd:pio
Feb 12 23:05:17 arrow kernel: Probing IDE interface ide0...
Feb 12 23:05:17 arrow kernel: libata version 3.00 loaded.
Feb 12 23:05:17 arrow kernel: usbcore: registered new interface driver usbfs
Feb 12 23:05:17 arrow kernel: usbcore: registered new interface driver hub
Feb 12 23:05:17 arrow kernel: usbcore: registered new device driver usb
Feb 12 23:05:17 arrow kernel: USB Universal Host Controller Interface driver
v3.0
Feb 12 23:05:17 arrow kernel: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22,
2004)
Feb 12 23:05:17 arrow kernel: hdb: IRQ probe failed (0xffffedfc)
Feb 12 23:05:17 arrow kernel: hdb: IRQ probe failed (0xffffedfc)
Feb 12 23:05:17 arrow kernel: hda: ST3200826A, ATA DISK drive
Feb 12 23:05:17 arrow kernel: hda: host max PIO5 wanted PIO255(auto-tune)
selected PIO4
Feb 12 23:05:17 arrow kernel: hda: UDMA/100 mode selected
Feb 12 23:05:17 arrow kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Feb 12 23:05:17 arrow kernel: Probing IDE interface ide1...
Feb 12 23:05:17 arrow kernel: hdc: _NEC DVD_RW ND-3530A, ATAPI CD/DVD-ROM drive
Feb 12 23:05:17 arrow kernel: hdc: host max PIO5 wanted PIO255(auto-tune)
selected PIO4
Feb 12 23:05:17 arrow kernel: hdc: UDMA/33 mode selected
Feb 12 23:05:17 arrow kernel: ide1 at 0x170-0x177,0x376 on irq 15
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ
0, using IRQ 21
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> Link
[ALKB] -> GSI 21 (level, low) -> IRQ 17
Feb 12 23:05:17 arrow kernel: uhci_hcd 0000:00:10.0: UHCI Host Controller
Feb 12 23:05:17 arrow kernel: uhci_hcd 0000:00:10.0: new USB bus registered,
assigned bus number 1
Feb 12 23:05:17 arrow kernel: uhci_hcd 0000:00:10.0: irq 17, io base 0x0000ac00
Feb 12 23:05:17 arrow kernel: usb usb1: configuration #1 chosen from 1 choice
Feb 12 23:05:17 arrow kernel: hub 1-0:1.0: USB hub found
Feb 12 23:05:17 arrow kernel: hub 1-0:1.0: 2 ports detected
Feb 12 23:05:17 arrow kernel: hda: max request size: 512KiB
Feb 12 23:05:17 arrow kernel: hda: 390721968 sectors (200049 MB) w/8192KiB
Cache, CHS=24321/255/63
Feb 12 23:05:17 arrow kernel: hda: cache flushes supported
Feb 12 23:05:17 arrow kernel: hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8
hda9 hda10 >
Feb 12 23:05:17 arrow kernel: hdc: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive,
2048kB Cache
Feb 12 23:05:17 arrow kernel: Uniform CD-ROM driver Revision: 3.20
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt 0000:00:10.1[A] -> Link
[ALKB] -> GSI 21 (level, low) -> IRQ 17
Feb 12 23:05:17 arrow kernel: uhci_hcd 0000:00:10.1: UHCI Host Controller
Feb 12 23:05:17 arrow kernel: uhci_hcd 0000:00:10.1: new USB bus registered,
assigned bus number 2
Feb 12 23:05:17 arrow kernel: uhci_hcd 0000:00:10.1: irq 17, io base 0x0000b000
Feb 12 23:05:17 arrow kernel: usb usb2: configuration #1 chosen from 1 choice
Feb 12 23:05:17 arrow kernel: hub 2-0:1.0: USB hub found
Feb 12 23:05:17 arrow kernel: hub 2-0:1.0: 2 ports detected
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt 0000:00:10.2[B] -> Link
[ALKB] -> GSI 21 (level, low) -> IRQ 17
Feb 12 23:05:17 arrow kernel: uhci_hcd 0000:00:10.2: UHCI Host Controller
Feb 12 23:05:17 arrow kernel: uhci_hcd 0000:00:10.2: new USB bus registered,
assigned bus number 3
Feb 12 23:05:17 arrow kernel: uhci_hcd 0000:00:10.2: irq 17, io base 0x0000b400
Feb 12 23:05:17 arrow kernel: usb usb3: configuration #1 chosen from 1 choice
Feb 12 23:05:17 arrow kernel: hub 3-0:1.0: USB hub found
Feb 12 23:05:17 arrow kernel: hub 3-0:1.0: 2 ports detected
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt 0000:00:10.3[B] -> Link
[ALKB] -> GSI 21 (level, low) -> IRQ 17
Feb 12 23:05:17 arrow kernel: uhci_hcd 0000:00:10.3: UHCI Host Controller
Feb 12 23:05:17 arrow kernel: uhci_hcd 0000:00:10.3: new USB bus registered,
assigned bus number 4
Feb 12 23:05:17 arrow kernel: uhci_hcd 0000:00:10.3: irq 17, io base 0x0000b800
Feb 12 23:05:17 arrow kernel: usb usb4: configuration #1 chosen from 1 choice
Feb 12 23:05:17 arrow kernel: hub 4-0:1.0: USB hub found
Feb 12 23:05:17 arrow kernel: hub 4-0:1.0: 2 ports detected
Feb 12 23:05:17 arrow kernel: 8139cp 0000:00:13.0: This (id 10ec:8139 rev 10)
is not an 8139C+ compatible chip
Feb 12 23:05:17 arrow kernel: 8139cp 0000:00:13.0: Try the "8139too" driver
instead.
Feb 12 23:05:17 arrow kernel: sata_via 0000:00:0f.0: version 2.3
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt 0000:00:0f.0[B] -> Link
[ALKA] -> GSI 20 (level, low) -> IRQ 16
Feb 12 23:05:17 arrow kernel: sata_via 0000:00:0f.0: routed to hard irq line 11
Feb 12 23:05:17 arrow kernel: 8139too Fast Ethernet driver 0.9.28
Feb 12 23:05:17 arrow kernel: scsi0 : sata_via
Feb 12 23:05:17 arrow kernel: scsi1 : sata_via
Feb 12 23:05:17 arrow kernel: ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x9400
bmdma 0xa000 irq 16
Feb 12 23:05:17 arrow kernel: ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9c00
bmdma 0xa008 irq 16
Feb 12 23:05:17 arrow kernel: ata1: SATA link down 1.5 Gbps (SStatus 0 SControl
300)
Feb 12 23:05:17 arrow kernel: ata2: SATA link down 1.5 Gbps (SStatus 0 SControl
300)
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt 0000:00:10.4[C] -> Link
[ALKB] -> GSI 21 (level, low) -> IRQ 17
Feb 12 23:05:17 arrow kernel: ehci_hcd 0000:00:10.4: EHCI Host Controller
Feb 12 23:05:17 arrow kernel: ehci_hcd 0000:00:10.4: new USB bus registered,
assigned bus number 5
Feb 12 23:05:17 arrow kernel: ehci_hcd 0000:00:10.4: irq 17, io mem 0xde000000
Feb 12 23:05:17 arrow kernel: usb 3-1: new full speed USB device using uhci_hcd
and address 2
Feb 12 23:05:17 arrow kernel: ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI
1.00, driver 10 Dec 2004
Feb 12 23:05:17 arrow kernel: usb usb5: configuration #1 chosen from 1 choice
Feb 12 23:05:17 arrow kernel: hub 5-0:1.0: USB hub found
Feb 12 23:05:17 arrow kernel: hub 5-0:1.0: 8 ports detected
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18
(level, low) -> IRQ 18
Feb 12 23:05:17 arrow kernel: eth0: RealTek RTL8139 at 0xc000,
00:14:85:47:20:98, IRQ 18
Feb 12 23:05:17 arrow kernel: eth0: Identified 8139 chip type 'RTL-8100B/8139D'
Feb 12 23:05:17 arrow kernel: Attempting manual resume
Feb 12 23:05:17 arrow kernel: kjournald starting. Commit interval 5 seconds
Feb 12 23:05:17 arrow kernel: EXT3-fs: mounted filesystem with ordered data
mode.
Feb 12 23:05:17 arrow kernel: usb 3-1: new full speed USB device using uhci_hcd
and address 3
Feb 12 23:05:17 arrow kernel: usb 3-1: configuration #1 chosen from 1 choice
Feb 12 23:05:17 arrow kernel: usb 4-1: new low speed USB device using uhci_hcd
and address 2
Feb 12 23:05:17 arrow kernel: usb 4-1: configuration #1 chosen from 1 choice
Feb 12 23:05:17 arrow kernel: input: PC Speaker as /class/input/input0
Feb 12 23:05:17 arrow kernel: Real Time Clock Driver v1.12ac
Feb 12 23:05:17 arrow kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Feb 12 23:05:17 arrow kernel: shpchp: Standard Hot Plug PCI Controller Driver
version: 0.4
Feb 12 23:05:17 arrow kernel: Linux agpgart interface v0.102
Feb 12 23:05:17 arrow kernel: parport_pc 00:0a: reported by Plug and Play ACPI
Feb 12 23:05:17 arrow kernel: parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
Feb 12 23:05:17 arrow kernel: agpgart: Detected AGP bridge 0
Feb 12 23:05:17 arrow kernel: agpgart: AGP aperture is 128M @ 0xd0000000
Feb 12 23:05:17 arrow kernel: Initializing USB Mass Storage driver...
Feb 12 23:05:17 arrow kernel: input: Power Button (FF) as /class/input/input1
Feb 12 23:05:17 arrow kernel: ACPI: Power Button (FF) [PWRF]
Feb 12 23:05:17 arrow kernel: input: Power Button (CM) as /class/input/input2
Feb 12 23:05:17 arrow kernel: scsi2 : SCSI emulation for USB Mass Storage
devices
Feb 12 23:05:17 arrow kernel: ACPI: Power Button (CM) [PWRB]
Feb 12 23:05:17 arrow kernel: usbcore: registered new interface driver
usb-storage
Feb 12 23:05:17 arrow kernel: USB Mass Storage support registered.
Feb 12 23:05:17 arrow kernel: usb-storage: device found at 3
Feb 12 23:05:17 arrow kernel: usb-storage: waiting for device to settle before
scanning
Feb 12 23:05:17 arrow kernel: usbcore: registered new interface driver hiddev
Feb 12 23:05:17 arrow kernel: input: KYE Systems Corp. Wireless Keyboard &
Mouse as /class/input/input3
Feb 12 23:05:17 arrow kernel: input,hidraw0: USB HID v1.10 Keyboard [KYE
Systems Corp. Wireless Keyboard & Mouse] on usb-0000:00:10.3-1
Feb 12 23:05:17 arrow kernel: input: KYE Systems Corp. Wireless Keyboard &
Mouse as /class/input/input4
Feb 12 23:05:17 arrow kernel: input,hidraw1: USB HID v1.10 Mouse [KYE Systems
Corp. Wireless Keyboard & Mouse] on usb-0000:00:10.3-1
Feb 12 23:05:17 arrow kernel: usbcore: registered new interface driver usbhid
Feb 12 23:05:17 arrow kernel: drivers/hid/usbhid/hid-core.c: v2.6:USB HID core
driver
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ
0, using IRQ 22
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
Feb 12 23:05:17 arrow kernel: ACPI: PCI Interrupt 0000:00:11.5[C] -> Link
[ALKC] -> GSI 22 (level, low) -> IRQ 19
Feb 12 23:05:17 arrow kernel: PCI: Setting latency timer of device 0000:00:11.5
to 64
Feb 12 23:05:17 arrow kernel: Adding 987956k swap on /dev/hda5. Priority:-1
extents:1 across:987956k
Feb 12 23:05:17 arrow kernel: EXT3 FS on hda7, internal journal
Feb 12 23:05:17 arrow kernel: Driver 'sd' needs updating - please use bus_type
methods
Feb 12 23:05:17 arrow kernel: device-mapper: uevent: version 1.0.3
Feb 12 23:05:17 arrow kernel: device-mapper: ioctl: 4.12.0-ioctl (2007-10-02)
initialised: [EMAIL PROTECTED]
Feb 12 23:05:17 arrow kernel: kjournald starting. Commit interval 5 seconds
Feb 12 23:05:17 arrow kernel: EXT3 FS on hda6, internal journal
Feb 12 23:05:17 arrow kernel: EXT3-fs: mounted filesystem with ordered data
mode.
Feb 12 23:05:17 arrow kernel: kjournald starting. Commit interval 5 seconds
Feb 12 23:05:17 arrow kernel: EXT3 FS on hda10, internal journal
Feb 12 23:05:17 arrow kernel: EXT3-fs: mounted filesystem with ordered data
mode.
Feb 12 23:05:17 arrow kernel: kjournald starting. Commit interval 5 seconds
Feb 12 23:05:17 arrow kernel: EXT3 FS on hda8, internal journal
Feb 12 23:05:17 arrow kernel: EXT3-fs: mounted filesystem with ordered data
mode.
Feb 12 23:05:17 arrow kernel: kjournald starting. Commit interval 5 seconds
Feb 12 23:05:17 arrow kernel: EXT3 FS on hda9, internal journal
Feb 12 23:05:17 arrow kernel: EXT3-fs: mounted filesystem with ordered data
mode.
Feb 12 23:05:17 arrow kernel: NTFS driver 2.1.29 [Flags: R/W MODULE].
Feb 12 23:05:17 arrow kernel: NTFS volume version 3.1.
Feb 12 23:05:17 arrow kernel: NTFS volume version 3.1.
Feb 12 23:05:17 arrow kernel: usb-storage: device scan complete
Feb 12 23:05:17 arrow kernel: scsi 2:0:0:0: Direct-Access Generic USB SD
Reader 1.00 PQ: 0 ANSI: 0
Feb 12 23:05:17 arrow kernel: scsi 2:0:0:1: Direct-Access Generic USB CF
Reader 1.01 PQ: 0 ANSI: 0
Feb 12 23:05:17 arrow kernel: scsi 2:0:0:2: Direct-Access Generic USB SM
Reader 1.02 PQ: 0 ANSI: 0
Feb 12 23:05:17 arrow kernel: scsi 2:0:0:3: Direct-Access Generic USB MS
Reader 1.03 PQ: 0 ANSI: 0
Feb 12 23:05:17 arrow kernel: sd 2:0:0:0: [sda] Attached SCSI removable disk
Feb 12 23:05:17 arrow kernel: sd 2:0:0:1: [sdb] Attached SCSI removable disk
Feb 12 23:05:17 arrow kernel: sd 2:0:0:2: [sdc] Attached SCSI removable disk
Feb 12 23:05:17 arrow kernel: sd 2:0:0:3: [sdd] Attached SCSI removable disk
Feb 12 23:05:17 arrow kernel: eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
Feb 12 23:05:17 arrow kernel: NET: Registered protocol family 10
Feb 12 23:05:17 arrow kernel: lo: Disabled Privacy Extensions
Feb 12 23:05:17 arrow kernel: usbcore: registered new interface driver usblp
Feb 12 23:05:17 arrow ptal-mlcd: SYSLOG at ExMgr.cpp:652,
dev=<mlc:usb:psc_1200_series>, pid=2569, e=2, t=1202853917 ptal-mlcd
successfully initialized.
Feb 12 23:05:17 arrow ptal-printd: ptal-printd(mlc:usb:psc_1200_series)
successfully initialized using /var/run/ptal-printd/mlc_usb_psc_1200_series*.
Feb 12 23:05:18 arrow kernel: lp0: using parport0 (interrupt-driven).
Feb 12 23:05:18 arrow kernel: ppdev: user-space parallel port driver
Feb 12 23:05:20 arrow postfix/master[2763]: daemon started -- version 2.4.6,
configuration /etc/postfix
Feb 12 23:05:21 arrow ntpd[2784]: ntpd [EMAIL PROTECTED] Sun Jan 13 11:21:22
UTC 2008 (1)
Feb 12 23:05:21 arrow ntpd[2785]: precision = 1.000 usec
Feb 12 23:05:21 arrow ntpd[2785]: Listening on interface #0 wildcard,
0.0.0.0#123 Disabled
Feb 12 23:05:21 arrow ntpd[2785]: Listening on interface #1 wildcard, ::#123
Disabled
Feb 12 23:05:21 arrow ntpd[2785]: Listening on interface #2 lo, ::1#123 Enabled
Feb 12 23:05:21 arrow ntpd[2785]: Listening on interface #3 eth0,
fe80::214:85ff:fe47:2098#123 Enabled
Feb 12 23:05:21 arrow ntpd[2785]: Listening on interface #4 lo, 127.0.0.1#123
Enabled
Feb 12 23:05:21 arrow ntpd[2785]: Listening on interface #5 eth0,
10.0.0.154#123 Enabled
Feb 12 23:05:21 arrow ntpd[2785]: kernel time sync status 0040
Feb 12 23:05:21 arrow ntpd[2785]: frequency initialized 10.363 PPM from
/var/lib/ntp/ntp.drift
Feb 12 23:05:25 arrow kernel: eth0: no IPv6 routers present
Feb 12 23:05:27 arrow /usr/sbin/cron[2879]: (CRON) INFO (pidfile fd = 3)
Feb 12 23:05:27 arrow /usr/sbin/cron[2882]: (CRON) STARTUP (fork ok)
Feb 12 23:05:27 arrow /usr/sbin/cron[2882]: (CRON) INFO (Running @reboot jobs)
Feb 12 23:05:28 arrow /USR/SBIN/CRON[2889]: (root) CMD (apt-get update)
Feb 12 23:05:30 arrow ntpd[2785]: synchronized to 80.85.129.25, stratum 4
Feb 12 23:05:30 arrow ntpd[2785]: kernel time sync status change 0001
Feb 12 23:05:30 arrow kernel: [drm] Initialized drm 1.1.0 20060810
Feb 12 23:05:30 arrow kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16
(level, low) -> IRQ 20
Feb 12 23:05:30 arrow kernel: [drm] Initialized via 2.11.1 20070202 on minor 0
Feb 12 23:05:30 arrow kernel: agpgart: Found an AGP 3.0 compliant device at
0000:00:00.0.
Feb 12 23:05:30 arrow kernel: agpgart: Xorg tried to set rate=x12. Setting to
AGP3 x8 mode.
Feb 12 23:05:30 arrow kernel: agpgart: Putting AGP V3 device at 0000:00:00.0
into 8x mode
Feb 12 23:05:30 arrow kernel: agpgart: Putting AGP V3 device at 0000:01:00.0
into 8x mode
Feb 12 23:05:32 arrow kernel: hdc: cdrom_pc_intr: The drive appears confused
(ireason = 0x01). Trying to recover by ending request.
Feb 12 23:05:48 arrow last message repeated 13 times
Feb 12 23:05:48 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:48 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:48 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:50 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:50 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:50 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:50 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:50 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:50 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:50 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:50 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:50 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:50 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:50 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:50 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:50 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:50 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:50 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:50 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:50 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:50 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:50 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:50 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:51 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:51 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:51 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:52 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:52 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:52 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:52 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:52 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:52 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:52 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:52 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:52 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:52 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:52 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:52 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:52 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:52 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:52 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:52 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:52 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:52 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:52 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:52 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:52 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:52 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:52 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:52 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:52 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:52 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:52 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:52 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:52 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:52 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:52 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:52 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:52 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:52 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:52 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:52 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:52 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:52 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:52 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:53 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:53 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:53 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:53 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:53 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:53 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:53 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:53 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:53 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:53 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:53 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:53 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:53 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:53 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:53 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:53 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:53 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:53 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:53 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:53 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:53 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:53 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:54 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:54 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:54 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:54 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:54 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:54 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:54 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:55 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:55 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:55 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:55 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:55 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:55 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:55 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:55 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:56 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:56 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:56 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:56 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:56 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:56 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:56 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:56 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:56 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:56 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:56 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:56 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:56 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:56 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:56 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:58 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:58 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:58 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:58 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:58 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:58 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:58 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:58 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:58 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:58 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:58 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:58 arrow kernel: hdc: drive not ready for command
Feb 12 23:05:58 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:05:58 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:05:58 arrow kernel: hdc: drive not ready for command
Feb 12 23:06:00 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:06:00 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:06:00 arrow kernel: hdc: drive not ready for command
Feb 12 23:06:00 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:06:00 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:06:00 arrow kernel: hdc: drive not ready for command
Feb 12 23:06:00 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:06:00 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:06:00 arrow kernel: hdc: drive not ready for command
Feb 12 23:06:00 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:06:00 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:06:00 arrow kernel: hdc: drive not ready for command
Feb 12 23:06:00 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:06:00 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:06:00 arrow kernel: hdc: drive not ready for command
Feb 12 23:06:02 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:06:02 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:06:02 arrow kernel: hdc: drive not ready for command
Feb 12 23:06:02 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:06:02 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:06:02 arrow kernel: hdc: drive not ready for command
Feb 12 23:06:02 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:06:02 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:06:02 arrow kernel: hdc: drive not ready for command
Feb 12 23:06:02 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:06:02 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:06:02 arrow kernel: hdc: drive not ready for command
Feb 12 23:06:02 arrow kernel: hdc: status error: status=0x58 { DriveReady
SeekComplete DataRequest }
Feb 12 23:06:02 arrow kernel: ide: failed opcode was: unknown
Feb 12 23:06:02 arrow kernel: hdc: drive not ready for command
signature.asc
Description: Digital signature
