Luca Capello a écrit :
Package: libccid
Version: 1.3.1-2
Severity: wishlist
Hello,
with some card readers libccid needs pcmciautils to work correctly,
otherwise pcscd shows the following error:
=====
[EMAIL PROTECTED]:~# pcscd -f && echo OK
pcscdaemon.c:294:main() pcscd set to foreground with debug send to stderr
readerfactory.c:1113:RFInitializeReader() Attempting startup of \
GemPCTwin serial 00 00 using /usr/lib/pcsc/drivers/serial/libccidtwin.so.1.3.1
readerfactory.c:980:RFBindFunctions() Loading IFD Handler 3.0
ifdhandler.c:1239:init_driver() LogLevel: 0x0003
ifdhandler.c:1249:init_driver() DriverOptions: 0x0000
ifdhandler.c:77:IFDHCreateChannelByName() lun: 0, device: /dev/ttyS0:GemPCTwin
ccid_serial.c:677:OpenSerialByName() Get RS232 signals state failed:
Input/output error
ccid_serial.c:698:OpenSerialByName() tcflush() function error: Input/output
error
ccid_serial.c:703:OpenSerialByName() tcgetattr() function error: Input/output
error
ifdhandler.c:95:IFDHCreateChannelByName() failed
readerfactory.c:1152:RFInitializeReader() Open Port 0 Failed (/dev/ttyS0)
readerfactory.c:1025:RFUnloadReader() Unloading reader driver.
readerfactory.c:252:RFAddReader() GemPCTwin serial init failed.
pcscdaemon.c:507:main() pcsc-lite 1.4.4 daemon ready.
pcscdaemon.c:572:signal_trap() Preparing for suicide
readerfactory.c:1379:RFCleanupReaders() entering cleaning function
pcscdaemon.c:532:at_exit() cleaning /var/run
OK
[EMAIL PROTECTED]:~#
What reader are you trying to use?
Even if the tasksel laptop task installs pcmciautils by default, the
fact that libccid suggests it doesn't harm.
AFAIK pcmciautils should only be needed when using a GemPC Card (PCMCIA
reader). If you have a PCMCIA port and want to use it you should not
remove the pcmciautils package installed by the laptop task.
Why have you removed pcmciautils if you want to use a PCMCIA device?
bye
--
Dr. Ludovic Rousseau
