Package: rt2x00-source Version: 2.0.12+git20071103-3 Severity: normal Installed this using modass for my Edimax PCMCIA card in a freshly lenny-installed Thinkpad T22. (Edimax card is a EW-7108PCg). Copied the firmware from Ralink site's .zip. I use WPA and openvpn (openvpn for historic reasons related to WEP insecurity and NFS just working better over it). Access point is an DWL-2000AP, 802.11g latest firmware. Network is shared with a couple of 802.11b devices (Roku Soundbridges).
For general web-browsing via ADSL (4mbit), ssh to various other machines, and downloading .debs, it all works fine. However, loading up the network by doing a copy from an NFS share typically hangs up after a few tens of seconds of data transfer. Other concurrent network connections also hang up, and ping starts reporting: sendmsg: No buffer space available The output of dmesg is attached below and seems to indicate some event unexpected by the driver has ocurred. This includes both the card coming up, and the error message apparently triggered by the load (after the "...time passes..." line) If it'd be better to take this direct to the serialmonkey site please advise. --- phy0 -> rt2x00lib_request_firmware: Info - Loading firmware file 'rt2561s.bin'. phy0 -> rt2x00lib_request_firmware: Info - Firmware detected - version: 0.8. phy0 -> rt61pci_init_bbp: Debug - Start initialization from EEPROM... phy0 -> rt61pci_init_bbp: Debug - ...End initialization from EEPROM. ADDRCONF(NETDEV_UP): wlan0: link is not ready phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 0 - CWmin: 4, CWmax: 10, Aifs: 2. phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 1 - CWmin: 4, CWmax: 10, Aifs: 2. phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 2 - CWmin: 4, CWmax: 10, Aifs: 2. phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 3 - CWmin: 4, CWmax: 10, Aifs: 2. phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 4 - CWmin: 4, CWmax: 10, Aifs: 2. phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 0 - CWmin: 4, CWmax: 10, Aifs: 2. phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 1 - CWmin: 4, CWmax: 10, Aifs: 2. phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 2 - CWmin: 4, CWmax: 10, Aifs: 2. phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 3 - CWmin: 4, CWmax: 10, Aifs: 2. phy0 -> rt2x00mac_conf_tx: Info - Configured TX ring 4 - CWmin: 4, CWmax: 10, Aifs: 2. wlan0: Initial auth_alg=0 wlan0: authenticate with AP 00:40:05:5e:24:32 wlan0: RX authentication from 00:40:05:5e:24:32 (alg=0 transaction=2 status=0) wlan0: authenticated wlan0: associate with AP 00:40:05:5e:24:32 wlan0: RX AssocResp from 00:40:05:5e:24:32 (capab=0x31 status=0 aid=3) wlan0: associated ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready wlan0: CTS protection enabled (BSSID=00:40:05:5e:24:32) wlan0: RX WEP frame with unknown keyidx 1 (A1=01:00:5e:00:00:fb A2=00:40:05:5e:24:32 A3=00:0d:4b:30:48:e5) wlan0: RX WEP frame with unknown keyidx 1 (A1=ff:ff:ff:ff:ff:ff A2=00:40:05:5e:24:32 A3=00:30:bd:19:0d:b5) wlan0: RX WEP frame with unknown keyidx 1 (A1=ff:ff:ff:ff:ff:ff A2=00:40:05:5e:24:32 A3=00:30:bd:19:0d:b5) wlan0: no IPv6 routers present wlan0: CTS protection disabled (BSSID=00:40:05:5e:24:32) wlan0: CTS protection enabled (BSSID=00:40:05:5e:24:32) wlan0: CTS protection disabled (BSSID=00:40:05:5e:24:32) wlan0: CTS protection enabled (BSSID=00:40:05:5e:24:32) ...time passes...everything OK... phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. phy0 -> rt2x00mac_tx_rts_cts: Warning - Failed to send RTS/CTS frame. phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. phy0 -> rt2x00mac_tx_rts_cts: Warning - Failed to send RTS/CTS frame. phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. phy0 -> rt2x00mac_tx_rts_cts: Warning - Failed to send RTS/CTS frame. phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. phy0 -> rt2x00mac_tx_rts_cts: Warning - Failed to send RTS/CTS frame. phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. phy0 -> rt2x00mac_tx_rts_cts: Warning - Failed to send RTS/CTS frame. phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. phy0 -> rt2x00mac_tx_rts_cts: Warning - Failed to send RTS/CTS frame. phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. phy0 -> rt2x00mac_tx_rts_cts: Warning - Failed to send RTS/CTS frame. phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. phy0 -> rt2x00mac_tx_rts_cts: Warning - Failed to send RTS/CTS frame. phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. phy0 -> rt2x00mac_tx_rts_cts: Warning - Failed to send RTS/CTS frame. phy0 -> rt2x00pci_write_tx_data: Error - Arrived at non-free entry in the non-full queue 2. Please file bug report to http://rt2x00.serialmonkey.com. phy0 -> rt2x00mac_tx_rts_cts: Warning - Failed to send RTS/CTS frame. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.22-3-686 (SMP w/1 CPU core) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages rt2x00-source depends on: ii bzip2 1.0.3-7 high-quality block-sorting file co ii debhelper 5.0.61 helper programs for debian/rules ii module-assistant 0.10.11 tool to make module package creati rt2x00-source recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
