Selon Kel Modderman <[EMAIL PROTECTED]>:
> Hi Bin,
>
> I have restored the reply list.
>
> On Thursday 13 December 2007 18:06:54 Bin Zhang wrote:
> > Kel Modderman wrote:
> > > On Tuesday 11 December 2007 06:06:50 Bin Zhang wrote:
> > >> Package: wpasupplicant
> > >> Version: 0.6.1~git20071119-1
> > >> Severity: wishlist
> > >>
> > >> Hi,
> > >>
> > >> wpa_cli and wpa_gui ("Fine Tuning the Roaming Setup") don't depend on
> > >> roaming mode.
> > >
> > > No they do not, but the document that your proposed patch changes talks
> > > about two modes: managed + roaming, and the fine tuning tips are talked
> > > about in the context of usefulness for the roaming mode. Therefore, I do
> > > not think it makes sense to change it in the way that is proposed.
> >
> > My english is very bad. So I have not proposed a good change. Just did a
> > copy and paste.
> > Talking wpa_cli and wpa_gui only in roaming mode may let one thinking
> > they don't work in managed mode. I use them in maged mode for fine tuning.
>
> The changes in the document need to change to reflect why and how they are
> useful in managed mode, as it is not immediately obvious to me how they could
> be. Examples of usage would be a good too.
You can use wpa_cli or wpa_gui in the same way in both modes.
Example: I have a wpa config file only for my home adsl.
============================================
iface eth1 inet dhcp
wpa-conf /home/zhang/.wpa/wpa_supplicant.conf
pre-up modprobe bcm43xx
post-down modprobe -r bcm43xx
post-down modprobe -r ieee80211_crypt_tkip
=========================================
and
=========================================
ctrl_interface=/var/run/wpa_supplicant
network={
ssid="myssid"
key_mgmt=WPA-PSK
proto=WPA
pairwise=TKIP
group=TKIP
psk="mypasswd"
priority=5
}
=======================================
When I am not at home, if I run 'ifup eth1', I can not get a connection and I
see
=======================================
# ifup eth1
Internet Systems Consortium DHCP Client V3.0.6
Copyright 2004-2007 Internet Systems Consortium.
All rights reserved.
For info, please visit http://www.isc.org/sw/dhcp/
Listening on LPF/eth1/00:11:24:22:f5:04
Sending on LPF/eth1/00:11:24:22:f5:04
Sending on Socket/fallback
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 13
...
...
=======================================
But if I run then wpa_gui (or wpa_cli), I can scan the network and add new
config found (if I know password or open network). And the new configuration
gets the connection immediately if 'ifup eth1' is not yet over.
If 'ifup eth1' is already finished:
========================================
...
...
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 5
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
========================================
Just wake dhclient with 'dhclient eth1' to get the connection.
Best regards,
Bin
>
> Thanks, Kel.
>
