Package: linux-image-2.6.18-5-amd64 Version: 2.6.18.dfsg.1-13etch5 (This bug *might* be a duplicate of #446744)
Ever since etch was upgraded to linux-image-2.6.18-5, my system has been
unable to boot. It kernel panics on boot, but not during the mount of
the root file system. I'm unable to work out what exactly in the boot
process is the problem, and because i'm unable to capture the output of
the panic, it's infeasible to type it all in here.
Following are some relevant items about my kernel config and hardware:
/proc/cmdline:
root=/dev/mapper/adam00-lv01 ro all-generic-ide irqpoll
CPU: Intel Core 2 Duo E6300
/proc/cpuinfo:
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz
stepping : 6
cpu MHz : 1864.848
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall
nx lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
bogomips : 3739.10
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz
stepping : 6
cpu MHz : 1864.848
cache size : 2048 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall
nx lm constant_tsc pni monitor ds_cpl vmx est tm2 cx16 xtpr lahf_lm
bogomips : 3729.88
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:
mobo: Intel DG965WH
lspci -nv:
00:00.0 0600: 8086:29a0 (rev 02)
Subsystem: 8086:514d
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:01.0 0604: 8086:29a1 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e8300000-e83fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000e7ffffff
Capabilities: [88] Subsystem: 8086:0000
Capabilities: [80] Power Management version 3
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
00:02.0 0380: 8086:29a2 (rev 02)
Subsystem: 8086:514d
Flags: bus master, fast devsel, latency 0
Memory at e8200000 (32-bit, non-prefetchable) [size=1M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
I/O ports at 4110 [size=8]
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
Capabilities: [d0] Power Management version 2
00:03.0 0780: 8086:29a4 (rev 02)
Subsystem: 8086:514d
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at e8426100 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Capabilities: [8c] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
00:19.0 0200: 8086:104b (rev 02)
Subsystem: 8086:0001
Flags: bus master, fast devsel, latency 0, IRQ 106
Memory at e8400000 (32-bit, non-prefetchable) [size=128K]
Memory at e8424000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 40e0 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable+
00:1a.0 0c03: 8086:2834 (rev 02) (prog-if 00 [UHCI])
Subsystem: 8086:514d
Flags: bus master, medium devsel, latency 0, IRQ 169
I/O ports at 40c0 [size=32]
00:1a.1 0c03: 8086:2835 (rev 02) (prog-if 00 [UHCI])
Subsystem: 8086:514d
Flags: bus master, medium devsel, latency 0, IRQ 82
I/O ports at 40a0 [size=32]
00:1a.7 0c03: 8086:283a (rev 02) (prog-if 20 [EHCI])
Subsystem: 8086:514d
Flags: bus master, medium devsel, latency 0, IRQ 185
Memory at e8425c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1b.0 0403: 8086:284b (rev 02)
Subsystem: 8086:2504
Flags: bus master, fast devsel, latency 0, IRQ 98
Memory at e8420000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
Capabilities: [70] Express Unknown type IRQ 0
00:1c.0 0604: 8086:283f (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: e8500000-e85fffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Capabilities: [90] Subsystem: 8086:283f
Capabilities: [a0] Power Management version 2
00:1c.1 0604: 8086:2841 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: e8100000-e81fffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Capabilities: [90] Subsystem: 8086:2841
Capabilities: [a0] Power Management version 2
00:1c.2 0604: 8086:2843 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: e8600000-e86fffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Capabilities: [90] Subsystem: 8086:2843
Capabilities: [a0] Power Management version 2
00:1c.3 0604: 8086:2845 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Memory behind bridge: e8700000-e87fffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Capabilities: [90] Subsystem: 8086:2845
Capabilities: [a0] Power Management version 2
00:1c.4 0604: 8086:2847 (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: e8800000-e88fffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable+
Capabilities: [90] Subsystem: 8086:2847
Capabilities: [a0] Power Management version 2
00:1d.0 0c03: 8086:2830 (rev 02) (prog-if 00 [UHCI])
Subsystem: 8086:514d
Flags: bus master, medium devsel, latency 0, IRQ 66
I/O ports at 4080 [size=32]
00:1d.1 0c03: 8086:2831 (rev 02) (prog-if 00 [UHCI])
Subsystem: 8086:514d
Flags: bus master, medium devsel, latency 0, IRQ 193
I/O ports at 4060 [size=32]
00:1d.2 0c03: 8086:2832 (rev 02) (prog-if 00 [UHCI])
Subsystem: 8086:514d
Flags: bus master, medium devsel, latency 0, IRQ 185
I/O ports at 4040 [size=32]
00:1d.7 0c03: 8086:2836 (rev 02) (prog-if 20 [EHCI])
Subsystem: 8086:514d
Flags: bus master, medium devsel, latency 0, IRQ 66
Memory at e8425800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 0604: 8086:244e (rev f2) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
I/O behind bridge: 00001000-00001fff
Memory behind bridge: e8000000-e80fffff
Prefetchable memory behind bridge: 00000000e8900000-00000000e89fffff
Capabilities: [50] Subsystem: 8086:514d
00:1f.0 0601: 8086:2812 (rev 02)
Subsystem: 8086:514d
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:1f.2 0106: 8086:2821 (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: 8086:514d
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 90
I/O ports at 4108 [size=8]
I/O ports at 411c [size=4]
I/O ports at 4100 [size=8]
I/O ports at 4118 [size=4]
I/O ports at 4020 [size=32]
Memory at e8425000 (32-bit, non-prefetchable) [size=2K]
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit-
Queue=0/4 Enable+
Capabilities: [70] Power Management version 3
Capabilities: [a8] #12 [0010]
00:1f.3 0c05: 8086:283e (rev 02)
Subsystem: 8086:514d
Flags: medium devsel, IRQ 82
Memory at e8426000 (32-bit, non-prefetchable) [size=256]
I/O ports at 4000 [size=32]
01:00.0 0300: 1002:5b60 (prog-if 00 [VGA])
Subsystem: 1458:2102
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at e0000000 (32-bit, prefetchable) [size=128M]
I/O ports at 3000 [size=256]
Memory at e8310000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at e8320000 [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Endpoint IRQ 0
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+
Queue=0/0 Enable-
01:00.1 0380: 1002:5b70
Subsystem: 1458:2103
Flags: bus master, fast devsel, latency 0
Memory at e8300000 (32-bit, non-prefetchable) [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Express Endpoint IRQ 0
03:00.0 0101: 11ab:6101 (rev b1) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: 11ab:6101
Flags: bus master, fast devsel, latency 0, IRQ 10
I/O ports at 2018 [size=8]
I/O ports at 2024 [size=4]
I/O ports at 2010 [size=8]
I/O ports at 2020 [size=4]
I/O ports at 2000 [size=16]
Memory at e8100000 (32-bit, non-prefetchable) [size=512]
Capabilities: [48] Power Management version 2
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit-
Queue=0/0 Enable-
Capabilities: [e0] Express Legacy Endpoint IRQ 0
07:00.0 0200: 10ec:8139 (rev 10)
Subsystem: 1432:9130
Flags: bus master, medium devsel, latency 32, IRQ 82
I/O ports at 1000 [size=256]
Memory at e8000000 (32-bit, non-prefetchable) [size=256]
Expansion ROM at e8900000 [disabled] [size=64K]
Capabilities: [50] Power Management version 2
Having seen the advice to look at /proc/cmdline in #446744, i'm going to
experiment with removing some of my command line options, which were
added at some time in the past to try to get the Marvell PATA controller
working.
--
Paul
<http://paul.gear.dyndns.org>
signature.asc
Description: OpenPGP digital signature
