Package: wodim Version: 9:1.1.6-1 Severity: important My recorder is BENQ DW1640, connected to a thinkpad by USB. It can burn CD-R and CD-RW well, but has problem with DVD.
This is a log. # wodim -vv dev=/dev/scd0 -sao speed=8 fs=32m a.iso TOC Type: 1 = CD-ROM scsidev: '/dev/scd0' devname: '/dev/scd0' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 Wodim version: 1.1.6 Using libusal version 'Cdrkit-1.1.6'. SCSI buffer size: 32768 Device type : Removable CD-ROM Version : 0 Response Format: 3 Capabilities : Vendor_info : 'BENQ ' Identification : 'DVD DD DW1640 ' Revision : 'BSMB' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x001B (DVD+R) Profile: 0x002B (DVD+R/DL) Profile: 0x001B (DVD+R) (current) Profile: 0x001A (DVD+RW) Profile: 0x0016 (DVD-R/DL layer jump recording) Profile: 0x0015 (DVD-R/DL sequential recording) Profile: 0x0014 (DVD-RW sequential recording) Profile: 0x0013 (DVD-RW restricted overwrite) Profile: 0x0011 (DVD-R sequential recording) Profile: 0x0010 (DVD-ROM) Profile: 0x000A (CD-RW) Profile: 0x0009 (CD-R) Profile: 0x0008 (CD-ROM) Using Session At Once (SAO) for DVD mode. Drive current speed: 8 Drive default speed: 8 Drive max speed : 8 Selected speed : 8 Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 688128 = 672 KB Beginning DMA speed test. Set CDR_NODMATEST environment variable if device communication breaks or freezes immediately after that. FIFO size : 33554432 = 32768 KB Track 01: data 4242 MB track: 1 start: 0 pregap: 150 Total size: 4871 MB (482:39.12) = 2171934 sectors Lout start: 4872 MB (482:41/09) = 2171934 sectors Track 1 start 0 Track 2 start 2171934 Current Secsize: 2048 HINT: use dvd+rw-mediainfo from dvd+rw-tools for information extraction. Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 123170 Speed set to 11080 KB/s Starting to write CD/DVD at speed 8.0 in real SAO mode for single session. Last chance to quit, starting real write i 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. Performing OPC... Errno: 5 (Input/output error), send opc scsi sendcmd: no error CDB: 54 01 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 12 00 00 00 00 09 00 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0x09 Qual 0x00 (track following error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 6.139s timeout 200s wodim: OPC failed. Writing time: 26.680s wodim: fifo had 1023 puts and 0 gets. wodim: fifo was 0 times empty and 0 times full, min fill was 100%. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 2.6.22-2-686 (SMP w/1 CPU core) Locale: LANG=zh_CN.UTF-8, LC_CTYPE=zh_CN.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages wodim depends on: ii libc6 2.7-3 GNU C Library: Shared libraries ii libcap1 1:1.10-14 support for getting/setting POSIX. Versions of packages wodim recommends: ii genisoimage 9:1.1.6-1 Creates ISO-9660 CD-ROM filesystem -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
