Package: installation-reports
* Boot method: Etch i386 netinst CD
* Image version:
http://cdimage.debian.org/debian-cd/4.0_r1/i386/iso-cd/debian-40r1-i386-netinst.iso
* Date: 17/11/2007
* Machine: Dell PowerEdge 1650
* Processor: 2 Intel Pentium III 1266 MHz
* Memory: 2097088 kB
* Partitions:
Disk /dev/sda: 73.3 GB, 73398878208 bytes
255 heads, 63 sectors/track, 8923 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 8437 67770171 5 Extended
/dev/sda2 8438 8923 3903795 82 Linux swap / Solaris
/dev/sda5 1 243 1951834+ 83 Linux
/dev/sda6 244 1459 9767488+ 83 Linux
/dev/sda7 1460 2067 4883728+ 83 Linux
/dev/sda8 2068 2675 4883728+ 83 Linux
/dev/sda9 2676 3891 9767488+ 83 Linux
/dev/sda10 3892 4499 4883728+ 83 Linux
/dev/sda11 4500 8146 29294496 83 Linux
/dev/sda12 8147 8437 2337426 83 Linux
* Output of lspci -nn and lspci -vnn:
00:00.0 Host bridge [0600]: Broadcom CNB20HE Host Bridge [1166:0008] (rev 23)
Flags: fast devsel
00:00.1 Host bridge [0600]: Broadcom CNB20HE Host Bridge [1166:0008] (rev 01)
Flags: bus master, medium devsel, latency 32
00:00.2 Host bridge [0600]: Broadcom CNB20HE Host Bridge [1166:0006] (rev 01)
Flags: medium devsel
00:00.3 Host bridge [0600]: Broadcom CNB20HE Host Bridge [1166:0006] (rev 01)
Flags: medium devsel
00:0c.0 VGA compatible controller [0300]: ATI Technologies Inc Rage XL
[1002:4752] (rev 27) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage XL [1002:8008]
Flags: bus master, VGA palette snoop, stepping, medium devsel, latency
32
Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
I/O ports at ec00 [size=256]
Memory at fe101000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 80000000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
00:0f.0 Host bridge [0600]: Broadcom CSB5 South Bridge [1166:0201] (rev 93)
Subsystem: Broadcom CSB5 South Bridge [1166:0201]
Flags: bus master, medium devsel, latency 32
00:0f.1 IDE interface [0101]: Broadcom CSB5 IDE Controller [1166:0212] (rev 93)
(prog-if 8a [Master SecP PriP])
Subsystem: Dell Unknown device [1028:810b]
Flags: bus master, medium devsel, latency 64
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at <ignored>
I/O ports at 08b0 [size=16]
00:0f.2 USB Controller [0c03]: Broadcom OSB4/CSB5 OHCI USB Controller
[1166:0220] (rev 05) (prog-if 10 [OHCI])
Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller [1166:0220]
Flags: bus master, medium devsel, latency 32, IRQ 11
Memory at fe100000 (32-bit, non-prefetchable) [size=4K]
00:0f.3 ISA bridge [0601]: Broadcom CSB5 LPC bridge [1166:0225]
Subsystem: Broadcom Unknown device [1166:0230]
Flags: bus master, medium devsel, latency 0
01:02.0 Ethernet controller [0200]: Intel Corporation 82544EI Gigabit Ethernet
Controller (Copper) [8086:1008] (rev 02)
Subsystem: Dell Unknown device [1028:011b]
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 177
Memory at feb60000 (32-bit, non-prefetchable) [size=128K]
Memory at feb40000 (32-bit, non-prefetchable) [size=128K]
I/O ports at cce0 [size=32]
Expansion ROM at fe800000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
01:04.0 Ethernet controller [0200]: Intel Corporation 82544EI Gigabit Ethernet
Controller (Copper) [8086:1008] (rev 02)
Subsystem: Dell Unknown device [1028:011b]
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 185
Memory at feb20000 (32-bit, non-prefetchable) [size=128K]
Memory at feb00000 (32-bit, non-prefetchable) [size=128K]
I/O ports at ccc0 [size=32]
Expansion ROM at 80020000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
Capabilities: [e4] PCI-X non-bridge device
Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Enable-
01:08.0 PCI bridge [0604]: Intel Corporation 80303 I/O Processor PCI-to-PCI
Bridge [8086:0309] (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, slow devsel, latency 32
Bus: primary=01, secondary=02, subordinate=02, sec-latency=32
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe900000-feafffff
Prefetchable memory behind bridge: 80100000-801fffff
Capabilities: [68] Power Management version 2
01:08.1 RAID bus controller [0104]: Dell PowerEdge Expandable RAID Controller
3/Di [1028:000a] (rev 01)
Subsystem: Dell Unknown device [1028:011b]
Flags: bus master, 66MHz, slow devsel, latency 32, IRQ 193
Memory at f0000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at 80040000 [disabled] [size=64K]
Capabilities: [80] Power Management version 2
02:06.0 SCSI storage controller [0100]: Adaptec RAID subsystem HBA [9005:00c5]
(rev 01)
Subsystem: Dell PowerEdge 2400,2500,2550,4400 [1028:00c5]
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 3
BIST result: 00
I/O ports at dc00 [size=256]
Memory at fe9ff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fea00000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
02:06.1 SCSI storage controller [0100]: Adaptec RAID subsystem HBA [9005:00c5]
(rev 01)
Subsystem: Dell PowerEdge 2400,2500,2550,4400 [1028:00c5]
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 7
BIST result: 00
I/O ports at d800 [size=256]
Memory at fe9fe000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at 80100000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
* Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [O]
Detect network card: [E]
Configure network: [ ]
Detect CD: [O]
Load installer modules: [O]
Detect hard drives: [E]
Partition hard drives: [ ]
Install base system: [ ]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
* Comments/Problems:
The CD image doesn't contain necessary drivers for a successful network install
:
- aacraid for the PERC 3/Di RAID controller
- e1000 for the Intel 82544EI GE Controller
I had to install from a sarge netinst CD and then upgrade to etch;
note that on this machine the "OS Install" BIOS option has to be set to "On"
for
the first install stage to succeed -- otherwise GRUB won't be able to install
itself into the MBR.
Simon
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
