reassign 443254 libsane 1.0.18-5 thanks Sebastien Desreux <[EMAIL PROTECTED]> wrote:
Hi Rene, Could you have a look at the following bug report for avision in SANE 1.0.18 ? Thanks. > This report is written with regard to the HP ScanJet 7400C scanner (avision > driver). > > When scanning with 'scanimage', it seems that the first scan of the day > always > sends the head (the moving part) too far, until it collides with the plastic > frame at the "bottom". I tried uncommenting the line > option force-a4 > in /etc/sane.d/avision.conf > but the result is the same. > > Interestingly, after the first failure, shutting down the scanner and > powering > it again, subsequent scans are OK. > > > There is also a vertical band of approximately 1cm that is not really > scanned; > it's weird: bright colors appear, but white patches look like they didn't > exist. This problem is independent from the first, it shows on all scans. > > > I happen to have a (fully paid) commercial version of the program "Vuescan" > made especially for Linux; none of the two problems mentionned above appear > with this software. I would really prefer to use scanimage of course, not > least for the scripting capabilities and the better rendering... Scanimage > worked great with my old ScanJet 6300C. JB. -- Julien BLACHE - Debian & GNU/Linux Developer - <[EMAIL PROTECTED]> Public key available on <http://www.jblache.org> - KeyID: F5D6 5169 GPG Fingerprint : 935A 79F1 C8B3 3521 FD62 7CC7 CD61 4FD7 F5D6 5169 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
