Package: arrayprobe Version: 2.0-1 Severity: important This is a raid5 configuration with hot spare. After rebuilding the array it shows:
# arrayprobe -f /dev/cciss/c1d0 OK Arrayprobe All controllers ok but # hpacucli controller slot=1 array A physicaldrive all show Smart Array 6400 in Slot 1 array A (Failed) physicaldrive 1:0 (port 1:id 0 , Parallel SCSI, 0 Byte, Failed) physicaldrive 1:1 (port 1:id 1 , Parallel SCSI, 300 GB, OK) physicaldrive 1:2 (port 1:id 2 , Parallel SCSI, 300 GB, OK) physicaldrive 1:3 (port 1:id 3 , Parallel SCSI, 300 GB, OK) physicaldrive 1:4 (port 1:id 4 , Parallel SCSI, 300 GB, OK) physicaldrive 1:5 (port 1:id 5 , Parallel SCSI, 300 GB, OK) physicaldrive 1:8 (port 1:id 8 , Parallel SCSI, 300 GB, OK, active spare) If running arrayprobe via cron once a day the failed drive might not be reported at all. That's not what I expect from a status checker. Regards, Torsten Sitz der Gesellschaft / Corporate Headquarters: Deutsche Lufthansa Aktiengesellschaft, Koeln Registereintragung / Registration: Amtsgericht Koeln HR B 2168 Vorsitzender des Aufsichtsrats / Chairman of the Supervisory Board: Dipl.-Ing. Dr.-Ing. E.h. Juergen Weber Vorstand / Executive Board: Wolfgang Mayrhuber (Vorsitzender / Chairman) Stephan Gemkow Stefan Lauer
