Package: linux-image-2.6.21-2-amd64
Version: 2.6.21-6
Severity: normal
--- Please enter the report below this line. ---
With this kernel, only 4 SATA of 6 installed SATA drives are available.
The motherboard is a SuperMicro H8DCE, using a dual-northbridge NVIDIA
2200/2050 combination. The drives that happen to be detected are off the
primary northbridge, none of the drives off the secondary northbridge appear.
All drives are detected (i.e. functions correctly) when using a Debian stable
(2.6.18-5) kernel, but the bug remains in an unstable (2.6.22-2) kernel.
Output of dmesg from kernel exhibiting problems is attached. Let me know what
else I can provide.
--- System information. ---
Architecture: amd64
Kernel: Linux 2.6.21-2-amd64
Debian Release: lenny/sid
900 testing mirror.cc.columbia.edu
900 testing ftp.debian.org
900 testing ftp.debian-unofficial.org
900 testing debian-multimedia.fx-services.com
800 unstable mirror.cc.columbia.edu
800 stable mirror.cc.columbia.edu
500 etch debian.beryl-project.org
--- Package information. ---
Depends (Version) | Installed
=======================================-+-===============
module-init-tools (>= 0.9.13) | 3.3-pre11-4
e2fsprogs (>= 1.35-7) | 1.40.2-1
initramfs-tools (>= 0.55) | 0.90a
OR yaird (>= 0.0.12-8) |
OR linux-initramfs-tool |
Linux version 2.6.21-2-amd64 (Debian 2.6.21-6) ([EMAIL PROTECTED]) (gcc version
4.1.3 20070629 (prerelease) (Debian 4.1.2-13)) #1 SMP Tue Jul 10 21:39:38 UTC
2007
Command line: root=/dev/md0 ro atapi_enabled
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffd0000 (usable)
BIOS-e820: 00000000bffd0000 - 00000000bffde000 (ACPI data)
BIOS-e820: 00000000bffde000 - 00000000c0000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 786384) 1 entries of 3200 used
Entering add_active_range(0, 1048576, 2359296) 2 entries of 3200 used
end_pfn_map = 2359296
DMI 2.3 present.
ACPI: RSDP 000F88C0, 0024 (r2 ACPIAM)
ACPI: XSDT BFFD0100, 004C (r1 A M I OEMXSDT 7000625 MSFT 97)
ACPI: FACP BFFD0290, 00F4 (r3 A M I OEMFACP 7000625 MSFT 97)
ACPI Warning (tbfadt-0434): Optional field "Gpe1Block" has zero address or
length: 00000000000044A0/0 [20070126]
ACPI: DSDT BFFD0410, 57C8 (r1 1ACAI 1ACAI003 3 INTL 2002026)
ACPI: FACS BFFDE000, 0040
ACPI: APIC BFFD0390, 0078 (r1 A M I OEMAPIC 7000625 MSFT 97)
ACPI: OEMB BFFDE040, 0073 (r1 A M I AMI_OEM 7000625 MSFT 97)
ACPI: SRAT BFFD5BE0, 0110 (r1 A M I OEMSRAT 7000625 MSFT 97)
ACPI: MCFG BFFD5CF0, 003C (r1 A M I OEMMCFG 7000625 MSFT 97)
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 1 -> APIC 1 -> Node 1
SRAT: Node 0 PXM 0 100000-c0000000
Entering add_active_range(0, 256, 786384) 0 entries of 3200 used
SRAT: Node 1 PXM 1 140000000-240000000
Entering add_active_range(1, 1310720, 2359296) 1 entries of 3200 used
SRAT: Node 0 PXM 0 100000-140000000
Entering add_active_range(0, 256, 786384) 2 entries of 3200 used
Entering add_active_range(0, 1048576, 1310720) 2 entries of 3200 used
SRAT: Node 0 PXM 0 0-140000000
Entering add_active_range(0, 0, 159) 3 entries of 3200 used
Entering add_active_range(0, 256, 786384) 4 entries of 3200 used
Entering add_active_range(0, 1048576, 1310720) 4 entries of 3200 used
NUMA: Using 30 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000140000000
Bootmem setup node 1 0000000140000000-0000000240000000
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 2359296
early_node_map[4] active PFN ranges
0: 0 -> 159
0: 256 -> 786384
0: 1048576 -> 1310720
1: 1310720 -> 2359296
On node 0 totalpages: 1048431
DMA zone: 56 pages used for memmap
DMA zone: 983 pages reserved
DMA zone: 2960 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 768008 pages, LIFO batch:31
Normal zone: 3584 pages used for memmap
Normal zone: 258560 pages, LIFO batch:31
On node 1 totalpages: 1048576
DMA zone: 0 pages used for memmap
DMA32 zone: 0 pages used for memmap
Normal zone: 14336 pages used for memmap
Normal zone: 1034240 pages, LIFO batch:31
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xdfefc000] gsi_base[24])
IOAPIC[1]: apic_id 3, address 0xdfefc000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: BIOS IRQ0 pin2 override ignored.
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e6000
Nosave address range: 00000000000e6000 - 0000000000100000
Nosave address range: 00000000bffd0000 - 00000000bffde000
Nosave address range: 00000000bffde000 - 00000000c0000000
Nosave address range: 00000000c0000000 - 00000000fec00000
Nosave address range: 00000000fec00000 - 00000000fec01000
Nosave address range: 00000000fec01000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fee01000
Nosave address range: 00000000fee01000 - 00000000ff780000
Nosave address range: 00000000ff780000 - 0000000100000000
Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
SMP: Allowing 4 CPUs, 2 hotplug CPUs
PERCPU: Allocating 37504 bytes of per cpu data
Built 2 zonelists. Total pages: 2063768
Kernel command line: root=/dev/md0 ro atapi_enabled
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
time.c: Detected 2000.042 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Checking aperture...
CPU 0: aperture @ 0 size 32 MB
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 4000000
Memory: 8169960k/9437184k available (1976k kernel code, 218068k reserved, 931k
data, 296k init)
Calibrating delay using timer specific routine.. 4002.47 BogoMIPS (lpj=8004954)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 0/0 -> Node 0
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
result 12500279
Detected 12.500 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4000.27 BogoMIPS (lpj=8000558)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU 1/1 -> Node 1
AMD Opteron(tm) Processor 246 stepping 08
Brought up 2 CPUs
migration_cost=0,524
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Transparent bridge - 0000:00:09.0
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Root Bridge [PCIB] (0000:80)
PCI: Probing PCI hardware (bus 80)
ACPI: PCI Interrupt Routing Table [\_SB_.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *9
ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *9
ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *10
ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *9
ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled.
ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *9
ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled.
ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *11
ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *5
ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14
ACPI: PCI Interrupt Link [LN2A] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2B] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2C] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LN2D] (IRQs 40 41 42 43) *0, disabled.
ACPI: PCI Interrupt Link [LK2N] (IRQs 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LT3D] (IRQs 44 45 46 47) *0, disabled.
ACPI: PCI Interrupt Link [LT2E] (IRQs 44 45 46 47) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: ACPI device : hid PNP0A03
pnp: ACPI device : hid PNP0200
pnp: ACPI device : hid PNP0B00
pnp: ACPI device : hid PNP0800
pnp: ACPI device : hid PNP0C04
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0501
pnp: ACPI device : hid PNP0400
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C02
pnp: ACPI device : hid PNP0C01
pnp: ACPI device : hid PNP0A03
pnp: PnP ACPI: found 14 devices
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
pnp: the driver 'system' has been registered
pnp: match found with the PnP device '00:08' and the driver 'system'
pnp: 00:08: iomem range 0xffb80000-0xfffffffe could not be reserved
pnp: 00:08: iomem range 0xdfefc000-0xdfefcfff has been reserved
pnp: 00:08: iomem range 0xdfefd000-0xdfefd3ff has been reserved
pnp: 00:08: iomem range 0xdfefe000-0xdfefe3ff has been reserved
pnp: match found with the PnP device '00:09' and the driver 'system'
pnp: 00:09: iomem range 0xfec00000-0xfec00fff could not be reserved
pnp: 00:09: iomem range 0xfee00000-0xfeefffff could not be reserved
pnp: match found with the PnP device '00:0a' and the driver 'system'
pnp: 00:0a: ioport range 0x680-0x6ff has been reserved
pnp: 00:0a: ioport range 0x295-0x296 has been reserved
pnp: 00:0a: ioport range 0x778-0x77f has been reserved
pnp: 00:0a: ioport range 0xb78-0xb7f has been reserved
pnp: 00:0a: ioport range 0xf78-0xf7f has been reserved
pnp: match found with the PnP device '00:0b' and the driver 'system'
pnp: 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
pnp: match found with the PnP device '00:0c' and the driver 'system'
pnp: 00:0c: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0c: iomem range 0xc0000-0xdffff has been reserved
pnp: 00:0c: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0c: iomem range 0x100000-0xbfffffff could not be reserved
PCI: Bridge: 0000:00:09.0
IO window: 8000-8fff
MEM window: cfb00000-cfbfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:0e.0
IO window: disabled.
Time: acpi_pm clocksource has been installed.
MEM window: c5a00000-cfafffff
PREFETCH window: cfd00000-dfcfffff
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0d.0 to 64
PCI: Setting latency timer of device 0000:00:0e.0 to 64
PCI: Bridge: 0000:80:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:80:0e.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:80:0d.0 to 64
PCI: Setting latency timer of device 0000:80:0e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 6833k freed
audit: initializing netlink socket (disabled)
audit(1189381615.172:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
PCI: Found enabled HT MSI Mapping on 0000:00:00.0
PCI: Found disabled HT MSI Mapping on 0000:80:0d.0
PCI: Found disabled HT MSI Mapping on 0000:80:00.0
PCI: MSI quirk detected. MSI disabled on chipset 0000:80:0d.0.
PCI: Found disabled HT MSI Mapping on 0000:80:0e.0
PCI: Found disabled HT MSI Mapping on 0000:80:00.0
PCI: MSI quirk detected. MSI disabled on chipset 0000:80:0e.0.
PCI: Setting latency timer of device 0000:00:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0d.0:pcie00]
PCI: Setting latency timer of device 0000:00:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:0e.0:pcie00]
PCI: Setting latency timer of device 0000:80:0d.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:80:0d.0:pcie00]
PCI: Setting latency timer of device 0000:80:0e.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:80:0e.0:pcie00]
Real Time Clock Driver v1.12ac
Linux agpgart interface v0.102 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
pnp: the driver 'serial' has been registered
pnp: match found with the PnP device '00:05' and the driver 'serial'
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: match found with the PnP device '00:06' and the driver 'serial'
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
pnp: the driver 'i8042 kbd' has been registered
pnp: the driver 'i8042 aux' has been registered
pnp: the driver 'i8042 kbd' has been unregistered
pnp: the driver 'i8042 aux' has been unregistered
PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 296k freed
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not
present [20070126]
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not
present [20070126]
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, low) ->
IRQ 22
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: OHCI Host Controller
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:02.0: irq 22, io mem 0xcfcfb000
SCSI subsystem initialized
libata version 2.20 loaded.
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
ieee1394: Initialized config rom entry `ip1394'
sata_nv 0000:00:07.0: version 3.3
ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 21 (level, low) ->
IRQ 21
sata_nv 0000:00:07.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:07.0 to 64
ata1: SATA max UDMA/133 cmd 0xffffc20000032480 ctl 0xffffc200000324a0 bmdma
0x000000000001bc00 irq 21
ata2: SATA max UDMA/133 cmd 0xffffc20000032580 ctl 0xffffc200000325a0 bmdma
0x000000000001bc08 irq 21
scsi0 : sata_nv
usb 1-2: new full speed USB device using ohci_hcd and address 2
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi1 : sata_nv
usb 1-2: configuration #1 chosen from 1 choice
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
pnp: the driver 'ide' has been registered
Initializing USB Mass Storage driver...
usb 1-3: new full speed USB device using ohci_hcd and address 3
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: ATA-7: ST3250823AS, 3.02, max UDMA/133
ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5
ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
scsi 1:0:0:0: Direct-Access ATA ST3250823AS 3.02 PQ: 0 ANSI: 5
ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LTIE] -> GSI 20 (level, low) ->
IRQ 20
sata_nv 0000:00:08.0: Using ADMA mode
PCI: Setting latency timer of device 0000:00:08.0 to 64
ata3: SATA max UDMA/133 cmd 0xffffc20000034480 ctl 0xffffc200000344a0 bmdma
0x000000000001a400 irq 20
ata4: SATA max UDMA/133 cmd 0xffffc20000034580 ctl 0xffffc200000345a0 bmdma
0x000000000001a408 irq 20
scsi2 : sata_nv
usb 1-3: configuration #1 chosen from 1 choice
usb 1-4: new full speed USB device using ohci_hcd and address 4
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi3 : sata_nv
usb 1-4: configuration #1 chosen from 1 choice
hub 1-4:1.0: USB hub found
hub 1-4:1.0: 2 ports detected
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATA-7: ST3250823AS, 3.03, max UDMA/133
ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata4.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5
ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
scsi 3:0:0:0: Direct-Access ATA ST3250823AS 3.03 PQ: 0 ANSI: 5
ata4: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
ACPI: PCI Interrupt Link [LT3D] enabled at IRQ 47
ACPI: PCI Interrupt 0000:80:07.0[A] -> Link [LT3D] -> GSI 47 (level, low) ->
IRQ 47
PCI: Unable to reserve mem region #6:[EMAIL PROTECTED] for device 0000:80:07.0
sata_nv: probe of 0000:80:07.0 failed with error -16
ACPI: PCI Interrupt Link [LT2E] enabled at IRQ 46
ACPI: PCI Interrupt 0000:80:08.0[A] -> Link [LT2E] -> GSI 46 (level, low) ->
IRQ 46
PCI: Unable to reserve mem region #6:[EMAIL PROTECTED] for device 0000:80:08.0
sata_nv: probe of 0000:80:08.0 failed with error -16
ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 22 (level, low) ->
IRQ 22
PCI: Setting latency timer of device 0000:00:02.1 to 64
ehci_hcd 0000:00:02.1: EHCI Host Controller
ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:02.1: debug port 1
PCI: cache line size of 64 is not supported by device 0000:00:02.1
ehci_hcd 0000:00:02.1: irq 22, io mem 0xcfce0000
ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 10 ports detected
usb 1-4.1: new full speed USB device using ohci_hcd and address 5
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-4:1.0: cannot disable port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-4:1.0: cannot disable port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-4:1.0: cannot disable port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: cannot reset port 1 (err = -62)
hub 1-4:1.0: Cannot enable port 1. Maybe the USB cable is bad?
hub 1-4:1.0: cannot disable port 1 (err = -62)
hub 1-4:1.0: cannot disable port 1 (err = -62)
hub 1-4:1.0: hub_port_status failed (err = -62)
hub 1-4:1.0: hub_port_status failed (err = -62)
usb 1-2: USB disconnect, address 2
ACPI: PCI Interrupt Link [LKLN] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LKLN] -> GSI 21 (level, low) ->
IRQ 21
PCI: Setting latency timer of device 0000:00:0a.0 to 64
forcedeth: using HIGHDMA
usb 1-3: USB disconnect, address 3
usb 1-4: USB disconnect, address 4
eth0: forcedeth.c: subsystem: 015d9:1011 bound to 0000:00:0a.0
ACPI: PCI Interrupt Link [LK2N] enabled at IRQ 45
ACPI: PCI Interrupt 0000:80:0a.0[A] -> Link [LK2N] -> GSI 45 (level, low) ->
IRQ 45
PCI: Setting latency timer of device 0000:80:0a.0 to 64
forcedeth: using HIGHDMA
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
ACPI: PCI Interrupt 0000:03:02.2[B] -> Link [LNKA] -> GSI 19 (level, low) ->
IRQ 19
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[cfbff800-cfbfffff]
Max Packet=[2048] IR/IT contexts=[4/8]
usb 2-2: new high speed USB device using ehci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
eth1: forcedeth.c: subsystem: 015d9:1011 bound to 0000:80:0a.0
NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
NFORCE-CK804: chipset revision 242
NFORCE-CK804: not 100% native mode: will probe irqs later
NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
ide0: BM-DMA at 0x3000-0x3007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0x3008-0x300f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
udev: renamed network interface eth1 to eth2
usb 2-3: new high speed USB device using ehci_hcd and address 3
udev: renamed network interface eth0_rename to eth1
usb 2-3: configuration #1 chosen from 1 choice
usb 2-4: new high speed USB device using ehci_hcd and address 4
Probing IDE interface ide1...
usb 2-4: configuration #1 chosen from 1 choice
hub 2-4:1.0: USB hub found
hub 2-4:1.0: 2 ports detected
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0151049482]
usb 2-4.1: new high speed USB device using ehci_hcd and address 5
usb 2-4.1: configuration #1 chosen from 1 choice
hub 2-4.1:1.0: USB hub found
hub 2-4.1:1.0: 4 ports detected
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdb: sdb1 sdb2 sdb3
sd 1:0:0:0: Attached scsi disk sdb
SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdc: sdc1 sdc2 sdc3
sd 2:0:0:0: Attached scsi disk sdc
SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
sdd: Write Protect is off
sdd: Mode Sense: 00 3a 00 00
SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO
or FUA
sdd: sdd1 sdd2 sdd3
sd 3:0:0:0: Attached scsi disk sdd
usb 2-4.2: new high speed USB device using ehci_hcd and address 6
usb 2-4.2: configuration #1 chosen from 1 choice
usb 2-4.1.1: new low speed USB device using ehci_hcd and address 7
usb 2-4.1.1: configuration #1 chosen from 1 choice
usb 2-4.1.2: new low speed USB device using ehci_hcd and address 8
usb 2-4.1.2: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input0
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:02.1-4.1.1
input: HID 0430:0005 as /class/input/input1
input: USB HID v1.00 Keyboard [HID 0430:0005] on usb-0000:00:02.1-4.1.2
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Probing IDE interface ide0...
Probing IDE interface ide1...
md: raid1 personality registered for level 1
raid5: automatically using best checksumming function: generic_sse
generic_sse: 6427.000 MB/sec
raid5: using function: generic_sse (6427.000 MB/sec)
raid6: int64x1 1796 MB/s
raid6: int64x2 2443 MB/s
raid6: int64x4 2362 MB/s
raid6: int64x8 1551 MB/s
raid6: sse2x1 2384 MB/s
raid6: sse2x2 3441 MB/s
raid6: sse2x4 3599 MB/s
raid6: using algorithm sse2x4 (3599 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
md: md0 stopped.
md: bind<sdb1>
md: bind<sdc1>
md: bind<sda1>
md: bind<sdd1>
raid1: raid set md0 active with 4 out of 5 mirrors
md: md1 stopped.
md: bind<sda3>
md: bind<sdb3>
md: bind<sdc3>
md: bind<sdd3>
raid5: device sdd3 operational as raid disk 0
raid5: device sdc3 operational as raid disk 4
raid5: device sdb3 operational as raid disk 3
raid5: device sda3 operational as raid disk 2
raid5: allocated 5312kB for md1
raid5: raid level 5 set md1 active with 4 out of 5 devices, algorithm 2
RAID5 conf printout:
--- rd:5 wd:4
disk 0, o:1, dev:sdd3
disk 2, o:1, dev:sda3
disk 3, o:1, dev:sdb3
disk 4, o:1, dev:sdc3
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED]
Attempting manual resume
ReiserFS: md0: found reiserfs format "3.6" with standard journal
ReiserFS: md0: using ordered data mode
ReiserFS: md0: journal params: device md0, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: md0: checking transaction log (md0)
ReiserFS: md0: Using r5 hash to sort names
usb-storage: device scan complete
scsi 5:0:0:0: CD-ROM SONY DVD RW DRU-800A KY01 PQ: 0 ANSI: 0
udev: renamed network interface eth1 to eth0
udev: renamed network interface eth2 to eth1
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
eth1394: eth2: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: Attached scsi generic sg2 type 0
sd 3:0:0:0: Attached scsi generic sg3 type 0
sr 5:0:0:0: Attached scsi generic sg4 type 5
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
input: PC Speaker as /class/input/input2
gameport: EMU10K1 is pci0000:03:02.1/gameport0, io 0x8c00, speed 1205kHz
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:07' and the driver 'parport_pc'
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378, irq 7 [PCSPP]
ACPI: PCI Interrupt Link [LAUI] enabled at IRQ 20
ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LAUI] -> GSI 20 (level, low) ->
IRQ 20
PCI: Setting latency timer of device 0000:00:04.0 to 64
usb-storage: device scan complete
scsi 6:0:0:0: Direct-Access SMSC 223 U HS-CF 3.60 PQ: 0 ANSI: 0
scsi 6:0:0:1: Direct-Access SMSC 223 U HS-MS 3.60 PQ: 0 ANSI: 0
scsi 6:0:0:2: Direct-Access SMSC 223 U HS-SM 3.60 PQ: 0 ANSI: 0
scsi 6:0:0:3: Direct-Access SMSC 223 U HS-SD/MMC 3.60 PQ: 0 ANSI: 0
sd 6:0:0:0: Attached scsi removable disk sde
sd 6:0:0:0: Attached scsi generic sg5 type 0
sd 6:0:0:1: Attached scsi removable disk sdf
sd 6:0:0:1: Attached scsi generic sg6 type 0
sd 6:0:0:2: Attached scsi removable disk sdg
sd 6:0:0:2: Attached scsi generic sg7 type 0
sd 6:0:0:3: Attached scsi removable disk sdh
sd 6:0:0:3: Attached scsi generic sg8 type 0
intel8x0_measure_ac97_clock: measured 56865 usecs
intel8x0: clocking to 46926
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 18
ACPI: PCI Interrupt 0000:03:02.0[A] -> Link [LNKD] -> GSI 18 (level, low) ->
IRQ 18
Installing spdif_bug patch: Audigy 2 ZS [SB0350]
Adding 248996k swap on /dev/sda2. Priority:-1 extents:1 across:248996k
Adding 248996k swap on /dev/sdb2. Priority:-2 extents:1 across:248996k
Adding 248996k swap on /dev/sdc2. Priority:-3 extents:1 across:248996k
Adding 248996k swap on /dev/sdd2. Priority:-4 extents:1 across:248996k
loop: AES key scrubbing enabled
loop: loaded (max 8 devices)
fuse init (API version 7.8)
ReiserFS: dm-3: found reiserfs format "3.6" with standard journal
ReiserFS: dm-3: using ordered data mode
ReiserFS: dm-3: journal params: device dm-3, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-3: checking transaction log (dm-3)
ReiserFS: dm-3: Using r5 hash to sort names
ReiserFS: dm-2: found reiserfs format "3.6" with standard journal
ReiserFS: dm-2: using ordered data mode
ReiserFS: dm-2: journal params: device dm-2, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-2: checking transaction log (dm-2)
ReiserFS: dm-2: Using r5 hash to sort names
ReiserFS: dm-0: found reiserfs format "3.6" with standard journal
ReiserFS: dm-0: using ordered data mode
ReiserFS: dm-0: journal params: device dm-0, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-0: checking transaction log (dm-0)
ReiserFS: dm-0: Using r5 hash to sort names
ReiserFS: dm-1: found reiserfs format "3.6" with standard journal
ReiserFS: dm-1: using ordered data mode
ReiserFS: dm-1: journal params: device dm-1, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: dm-1: checking transaction log (dm-1)
ReiserFS: dm-1: Using r5 hash to sort names
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
ClusterIP Version 0.8 loaded successfully
ip6_tables: (C) 2000-2006 Netfilter Core Team
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
eth0: no IPv6 routers present
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKC] -> GSI 17 (level, low) ->
IRQ 17
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.11 Wed Jun 13 16:33:22
PDT 2007
PCI: Setting latency timer of device 0000:01:00.0 to 64
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 100.14.11 Wed Jun 13 16:33:22
PDT 2007
