On 8/14/07, Gabor Gombas <[EMAIL PROTECTED]> wrote: > On Sat, Aug 11, 2007 at 06:28:56PM +0200, Brice Goglin wrote: > > > If the bug is still there with 6.6.193-1 (in experimental), I'll forward > > on the upstream bugzilla so that it gets attention before driver 6.7 is > > released. > > 6.6.3:
> (II) RADEON(0): Primary: > Monitor -- CRT > Connector -- VGA > DAC Type -- Primary > TMDS Type -- NONE > DDC Type -- VGA_DDC > (II) RADEON(0): Secondary: > Monitor -- NONE > Connector -- None > DAC Type -- Unknown > TMDS Type -- NONE > DDC Type -- NONE > > 6.6.193: > (II) RADEON(0): Port1: > Monitor -- CRT > Connector -- VGA > DAC Type -- Primary > TMDS Type -- External > DDC Type -- VGA_DDC > (II) RADEON(0): Port2: > Monitor -- CRT > Connector -- VGA > DAC Type -- Primary > TMDS Type -- External > DDC Type -- VGA_DDC > (II) RADEON(0): ---- Primary Head: Port1 ---- > (II) RADEON(0): ---- Secondary Head: Port2 ---- > > > So it still thinks that the card has two heads and it detects my monitor > on the non-existing head too. > There's an issue with master applying the same DDC channel to both ports on some cards. I'm looking into it. It looks like the same connector is in the bios table twice. Because the driver thinks both channels are using the same port, they are both seeing the same monitor. See bug 11781: https://bugs.freedesktop.org/show_bug.cgi?id=11781 As a work around for now you can specify a monitorlayout to disable the secondary head: Option "MonitorLayout" "CRT, NONE" Alex -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
