Hello Julien,
Thanks for your suggestion about cryptmount.
I'm not convinced that this is a problem with either the
upstream package, or with the debian build. I can find no reference
to any strip/ld -s/install -s in the upstream package; an ordinary
"make install" of the upstream package does not strip the executable;
and my debian/rules file does already contain 'dh_strip'
in the binary-arch target.
Could you possibly give me some more information about where
within the cryptmount package you believe the fault might lie?
Thanks,
Richard
+-- on Wed, Aug 08, 2007 at 03:13:22PM +0200, Julien Danjou wrote: ---+
> Package: cryptmount
> Version: 2.1-1
> Severity: wishlist
> User: [EMAIL PROTECTED]
> Usertags: nostrip
>
> Hello,
>
> There was a problem while autobuilding your package with
> DEB_BUILD_OPTIONS=nostrip.
> Final binaries are still stripped.
>
> If you call dh_strip correctly in debian/rules, this may mean that upstream
> is stripping anyway.
> You should look for call to strip, ld -s or install -s which may strip
> binaries.
>
>
> > Automatic build of cryptmount_2.1-1 on octave for sid/i386 by rebuildd 0.2.1
> > Build started at 2007-08-08 12:56:41.875112
> > ******************************************************************************
> > Reading package lists...
> > Building dependency tree...
> > Reading state information...
> > Need to get 262kB of source archives.
> > Get:1 http://ftp.fr.debian.org sid/main cryptmount 2.1-1 (dsc) [659B]
> > Get:2 http://ftp.fr.debian.org sid/main cryptmount 2.1-1 (tar) [246kB]
> > Get:3 http://ftp.fr.debian.org sid/main cryptmount 2.1-1 (diff) [15.1kB]
> > Fetched 262kB in 0s (451kB/s)
> > Download complete and in download only mode
> > W: /home/staff/jd/.pbuilderrc does not exist
> > I: using fakeroot in build.
> > Current time: Wed Aug 8 12:56:46 UTC 2007
> > pbuilder-time-stamp: 1186577806
> > Building the build Environment
> > -> extracting base tarball [/var/cache/pbuilder/sid.tgz]
> > -> creating local configuration
> > -> copying local configuration
> > -> mounting /proc filesystem
> > -> mounting /dev/pts filesystem
> > -> policy-rc.d already exists
> > Obtaining the cached apt archive contents
> > Installing the build-deps
> > -> Attempting to parse the build-deps
> > -> Considering build-dep debhelper (>= 4.0.0)
> > -> Trying debhelper
> > -> Considering build-dep autotools-dev
> > -> Trying autotools-dev
> > -> Considering build-dep libdevmapper-dev
> > -> Trying libdevmapper-dev
> > -> Considering build-dep libssl-dev (>= 0.9.7)
> > -> Trying libssl-dev
> > -> Considering build-dep libgcrypt11-dev (>= 1.1)
> > -> Trying libgcrypt11-dev
> > -> Installing debhelper autotools-dev libdevmapper-dev libssl-dev
> > libgcrypt11-dev
> > Reading package lists...
> > Building dependency tree...
> > Reading state information...
> > The following extra packages will be installed:
> > file gettext gettext-base html2text intltool-debian libgpg-error-dev
> > libmagic1 libssl0.9.8 po-debconf zlib1g-dev
> > Suggested packages:
> > dh-make cvs gettext-doc libgcrypt11-doc
> > Recommended packages:
> > curl wget lynx libmail-sendmail-perl libcompress-zlib-perl
> > The following NEW packages will be installed:
> > autotools-dev debhelper file gettext gettext-base html2text
> > intltool-debian
> > libdevmapper-dev libgcrypt11-dev libgpg-error-dev libmagic1 libssl-dev
> > libssl0.9.8 po-debconf zlib1g-dev
> > 0 upgraded, 15 newly installed, 0 to remove and 0 not upgraded.
> > Need to get 63.9kB/8882kB of archives.
> > After unpacking 24.3MB of additional disk space will be used.
> > Get:1 http://ftp.fr.debian.org sid/main libdevmapper-dev 2:1.02.20-2
> > [63.9kB]
> > debconf: delaying package configuration, since apt-utils is not installed
> > Fetched 63.9kB in 0s (195kB/s)
> > Selecting previously deselected package libssl0.9.8.
> > (Reading database ... 8965 files and directories currently installed.)
> > Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8e-5_i386.deb) ...
> > Selecting previously deselected package libmagic1.
> > Unpacking libmagic1 (from .../libmagic1_4.21-2_i386.deb) ...
> > Selecting previously deselected package file.
> > Unpacking file (from .../archives/file_4.21-2_i386.deb) ...
> > Selecting previously deselected package gettext-base.
> > Unpacking gettext-base (from .../gettext-base_0.16.1-2_i386.deb) ...
> > Selecting previously deselected package autotools-dev.
> > Unpacking autotools-dev (from .../autotools-dev_20070306.1_all.deb) ...
> > Selecting previously deselected package html2text.
> > Unpacking html2text (from .../html2text_1.3.2a-3_i386.deb) ...
> > Selecting previously deselected package gettext.
> > Unpacking gettext (from .../gettext_0.16.1-2_i386.deb) ...
> > Selecting previously deselected package intltool-debian.
> > Unpacking intltool-debian (from
> > .../intltool-debian_0.35.0+20060710.1_all.deb) ...
> > Selecting previously deselected package po-debconf.
> > Unpacking po-debconf (from .../po-debconf_1.0.9_all.deb) ...
> > Selecting previously deselected package debhelper.
> > Unpacking debhelper (from .../debhelper_5.0.53_all.deb) ...
> > Selecting previously deselected package libdevmapper-dev.
> > Unpacking libdevmapper-dev (from
> > .../libdevmapper-dev_2%3a1.02.20-2_i386.deb) ...
> > Selecting previously deselected package libgpg-error-dev.
> > Unpacking libgpg-error-dev (from .../libgpg-error-dev_1.4-2_i386.deb) ...
> > Selecting previously deselected package libgcrypt11-dev.
> > Unpacking libgcrypt11-dev (from .../libgcrypt11-dev_1.2.4-2_i386.deb) ...
> > Selecting previously deselected package zlib1g-dev.
> > Unpacking zlib1g-dev (from .../zlib1g-dev_1%3a1.2.3.3.dfsg-5_i386.deb) ...
> > Selecting previously deselected package libssl-dev.
> > Unpacking libssl-dev (from .../libssl-dev_0.9.8e-5_i386.deb) ...
> > Setting up libssl0.9.8 (0.9.8e-5) ...
> >
> > Setting up libmagic1 (4.21-2) ...
> >
> > Setting up file (4.21-2) ...
> > Setting up gettext-base (0.16.1-2) ...
> >
> > Setting up autotools-dev (20070306.1) ...
> > Setting up html2text (1.3.2a-3) ...
> >
> > Setting up gettext (0.16.1-2) ...
> >
> > Setting up intltool-debian (0.35.0+20060710.1) ...
> > Setting up po-debconf (1.0.9) ...
> > Setting up debhelper (5.0.53) ...
> > Setting up libdevmapper-dev (2:1.02.20-2) ...
> > Setting up libgpg-error-dev (1.4-2) ...
> > Setting up libgcrypt11-dev (1.2.4-2) ...
> > Setting up zlib1g-dev (1:1.2.3.3.dfsg-5) ...
> > Setting up libssl-dev (0.9.8e-5) ...
> > -> Finished parsing the build-deps
> > Reading package lists...
> > Building dependency tree...
> > Reading state information...
> > fakeroot is already the newest version.
> > 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
> > Copying back the cached apt archive contents
> > -> new cache content libdevmapper-dev_2%3a1.02.20-2_i386.deb added
> > Copying source file
> > -> copying [cryptmount_2.1-1.dsc]
> > -> copying [./cryptmount_2.1.orig.tar.gz]
> > -> copying [./cryptmount_2.1-1.diff.gz]
> > Extracting source
> > gpg: can't open `/gnupg/options.skel': No such file or directory
> > gpg: Signature made Sun Aug 5 10:50:08 2007 UTC using DSA key ID A51A4FDD
> > gpg: Can't check signature: public key not found
> > dpkg-source: extracting cryptmount in cryptmount-2.1
> > dpkg-source: unpacking cryptmount_2.1.orig.tar.gz
> > dpkg-source: applying ./cryptmount_2.1-1.diff.gz
> > -> Building the package
> > Setting DEB_BUILD_OPTIONS=nostrip
> > dpkg-buildpackage: source package is cryptmount
> > dpkg-buildpackage: source version is 2.1-1
> > dpkg-buildpackage: source changed by RW Penney <[EMAIL PROTECTED]>
> > dpkg-buildpackage: host architecture i386
> > dpkg-buildpackage: source version without epoch 2.1-1
> > fakeroot debian/rules clean
> > dh_testdir
> > dh_testroot
> > rm -f build-stamp
> > # Add here commands to clean up after the build process.
> > [ ! -f Makefile ] || /usr/bin/make distclean
> > cp -f /usr/share/misc/config.sub config.sub
> > cp -f /usr/share/misc/config.guess config.guess
> > dh_clean
> > dpkg-source -b cryptmount-2.1
> > dpkg-source: building cryptmount using existing cryptmount_2.1.orig.tar.gz
> > dpkg-source: building cryptmount in cryptmount_2.1-1.diff.gz
> > dpkg-source: building cryptmount in cryptmount_2.1-1.dsc
> > debian/rules build
> > dh_testdir
> > # Add here commands to configure the package.
> > CFLAGS="-Wall -g -O2" ./configure --host=i486-linux-gnu
> > --build=i486-linux-gnu --prefix=/usr --sysconfdir=/etc
> > --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info
> > --with-keymodules --with-openssl --with-libgcrypt --enable-delegation
> > --enable-fsck --enable-swap --enable-openssl-compat
> > checking for a BSD-compatible install... /usr/bin/install -c
> > checking whether build environment is sane... yes
> > checking for gawk... no
> > checking for mawk... mawk
> > checking whether make sets $(MAKE)... yes
> > checking for i486-linux-gnu-gcc... i486-linux-gnu-gcc
> > checking for C compiler default output file name... a.out
> > checking whether the C compiler works... yes
> > checking whether we are cross compiling... no
> > checking for suffix of executables...
> > checking for suffix of object files... o
> > checking whether we are using the GNU C compiler... yes
> > checking whether i486-linux-gnu-gcc accepts -g... yes
> > checking for i486-linux-gnu-gcc option to accept ISO C89... none needed
> > checking whether make sets $(MAKE)... (cached) yes
> > checking for a BSD-compatible install... /usr/bin/install -c
> > checking for special C compiler options needed for large files... no
> > checking for _FILE_OFFSET_BITS value needed for large files... 64
> > checking for library containing nanosleep... none required
> > checking how to run the C preprocessor... i486-linux-gnu-gcc -E
> > checking for grep that handles long lines and -e... /bin/grep
> > checking for egrep... /bin/grep -E
> > checking for ANSI C header files... yes
> > checking for sys/types.h... yes
> > checking for sys/stat.h... yes
> > checking for stdlib.h... yes
> > checking for string.h... yes
> > checking for memory.h... yes
> > checking for strings.h... yes
> > checking for inttypes.h... yes
> > checking for stdint.h... yes
> > checking for unistd.h... yes
> > checking errno.h usability... yes
> > checking errno.h presence... yes
> > checking for errno.h... yes
> > checking getopt.h usability... yes
> > checking getopt.h presence... yes
> > checking for getopt.h... yes
> > checking mntent.h usability... yes
> > checking mntent.h presence... yes
> > checking for mntent.h... yes
> > checking linux/fs.h usability... yes
> > checking linux/fs.h presence... yes
> > checking for linux/fs.h... yes
> > checking linux/loop.h usability... yes
> > checking linux/loop.h presence... yes
> > checking for linux/loop.h... yes
> > checking for ioctl... yes
> > checking for memset... yes
> > checking for mknod... yes
> > checking for open... yes
> > checking for strncpy... yes
> > checking for syslog... yes
> > checking for an ANSI C-conforming const... yes
> > checking libdevmapper.h usability... yes
> > checking libdevmapper.h presence... yes
> > checking for libdevmapper.h... yes
> > checking for library containing dm_task_create... -ldevmapper
> > checking dlfcn.h usability... yes
> > checking dlfcn.h presence... yes
> > checking for dlfcn.h... yes
> > checking for library containing dlopen... none required
> > checking openssl/bio.h usability... yes
> > checking openssl/bio.h presence... yes
> > checking for openssl/bio.h... yes
> > checking for library containing OpenSSL_add_all_ciphers... -lssl
> > checking gcrypt.h usability... yes
> > checking gcrypt.h presence... yes
> > checking for gcrypt.h... yes
> > checking for library containing gcry_cipher_open... -lgcrypt
> > checking for mount... 0
> > checking for mount... /bin/mount
> > checking for umount... 0
> > checking for umount... /bin/umount
> > checking for library containing swapon... none required
> > checking for mkswap... 1
> > checking for mkswap... /sbin/mkswap
> > checking for fsck... 1
> > checking for fsck... /sbin/fsck
> > checking whether NLS is requested... yes
> > checking for msgfmt... /usr/bin/msgfmt
> > checking for gmsgfmt... /usr/bin/msgfmt
> > checking for xgettext... /usr/bin/xgettext
> > checking for msgmerge... /usr/bin/msgmerge
> > checking build system type... i486-pc-linux-gnu
> > checking host system type... i486-pc-linux-gnu
> > checking for ld used by GCC... /usr/bin/ld
> > checking if the linker (/usr/bin/ld) is GNU ld... yes
> > checking for shared library run path origin... done
> > checking for CFPreferencesCopyAppValue... no
> > checking for CFLocaleCopyCurrent... no
> > checking for GNU gettext in libc... yes
> > checking whether to use NLS... yes
> > checking where the gettext function comes from... libc
> > configure: creating ./config.status
> > config.status: creating Makefile
> > config.status: creating delegates.h
> > config.status: creating man/Makefile
> > config.status: creating man/fr/Makefile
> > config.status: creating po/Makefile.in
> > config.status: creating config.h
> > config.status: executing po-directories commands
> > config.status: creating po/POTFILES
> > config.status: creating po/Makefile
> > configure:
> >
> > cryptmount-2.1 is now configured with:
> >
> > Source location: .
> > Installation prefix: /usr
> > Configuration directory: /etc/cryptmount
> > Filesystem mounting: /bin/mount
> > Filesystem unmounting: /bin/umount
> > Filesystem checking: /sbin/fsck
> > Crypto-swap support: yes
> > OpenSSL support: yes
> > libgcrypt support: yes
> > loadable keymodules support: yes
> >
> >
> > configure:
> > ***** Please ensure that you are aware of plans *****
> > ***** to remove support for the OpenSSL library *****
> > ***** from cryptmount-3.0 onwards. *****
> > ***** The file README.OpenSSL in the cryptmount *****
> > ***** source-directory provides information about *****
> > ***** the compatibility layer provided via libgcrypt, *****
> > ***** and other migration options. *****
> >
> > dh_testdir
> > # Add here commands to compile the package.
> > /usr/bin/make
> > make[1]: Entering directory `/tmp/buildd/cryptmount-2.1'
> > cd . && /bin/sh /tmp/buildd/cryptmount-2.1/missing --run automake-1.9
> > --gnu --ignore-deps Makefile
> > /tmp/buildd/cryptmount-2.1/missing: line 52: automake-1.9: command not found
> > WARNING: `automake-1.9' is missing on your system. You should only need it
> > if
> > you modified `Makefile.am', `acinclude.m4' or `configure.ac'.
> > You might want to install the `Automake' and `Perl' packages.
> > Grab them from any GNU archive site.
> > cd . && /bin/sh ./config.status Makefile
> > config.status: creating Makefile
> > make[1]: Leaving directory `/tmp/buildd/cryptmount-2.1'
> > make[1]: Entering directory `/tmp/buildd/cryptmount-2.1'
> > i486-linux-gnu-gcc -DHAVE_CONFIG_H -DAS_MODULE -I. -I. -I.
> > -DLOCALEDIR=\"/usr/share/locale\" -DCM_CONFIG_DIR="\"/etc/cryptmount\""
> > -DCM_MODULE_DIR="\"/usr/lib/cryptmount\"" -Wall -g -O2 -shared -fPIC
> > armour-ssl.c utils.c -lssl -o cm-ssl.so
> > i486-linux-gnu-gcc -DHAVE_CONFIG_H -DAS_MODULE -I. -I. -I.
> > -DLOCALEDIR=\"/usr/share/locale\" -DCM_CONFIG_DIR="\"/etc/cryptmount\""
> > -DCM_MODULE_DIR="\"/usr/lib/cryptmount\"" -Wall -g -O2 -shared -fPIC
> > armour-gcry.c utils.c -lgcrypt -o cm-gcry.so
> > /usr/bin/make all-recursive
> > make[2]: Entering directory `/tmp/buildd/cryptmount-2.1'
> > Making all in po
> > make[3]: Entering directory `/tmp/buildd/cryptmount-2.1/po'
> > make[3]: Nothing to be done for `all'.
> > make[3]: Leaving directory `/tmp/buildd/cryptmount-2.1/po'
> > Making all in man
> > make[3]: Entering directory `/tmp/buildd/cryptmount-2.1/man'
> > cd .. && /bin/sh ./config.status man/Makefile
> > config.status: creating man/Makefile
> > make[3]: Leaving directory `/tmp/buildd/cryptmount-2.1/man'
> > make[3]: Entering directory `/tmp/buildd/cryptmount-2.1/man'
> > Making all in fr
> > make[4]: Entering directory `/tmp/buildd/cryptmount-2.1/man/fr'
> > cd ../.. && /bin/sh ./config.status man/fr/Makefile
> > config.status: creating man/fr/Makefile
> > make[4]: Leaving directory `/tmp/buildd/cryptmount-2.1/man/fr'
> > make[4]: Entering directory `/tmp/buildd/cryptmount-2.1/man/fr'
> > sed "s,@PACKAGE_VERSION\@,2.1,g; s,@etcdir\@,/etc/cryptmount,g;
> > s,@DFLT_CIPHER\@,aes,g; s,@DFLT_KEYHASH\@,,g; s,@DFLT_KEYCIPHER\@,,g;
> > /^___DELETE_CSWAP_1/,/^___END_CSWAP_/d;
> > /^___DELETE_FSCK_1/,/^___END_FSCK_/d; /^___/d" cmtab.5.in > cmtab.5
> > sed "s,@PACKAGE_VERSION\@,2.1,g; s,@etcdir\@,/etc/cryptmount,g;
> > s,@DFLT_CIPHER\@,aes,g; s,@DFLT_KEYHASH\@,,g; s,@DFLT_KEYCIPHER\@,,g;
> > /^___DELETE_CSWAP_1/,/^___END_CSWAP_/d;
> > /^___DELETE_FSCK_1/,/^___END_FSCK_/d; /^___/d" cryptmount.8.in >
> > cryptmount.8
> > make[4]: Leaving directory `/tmp/buildd/cryptmount-2.1/man/fr'
> > make[4]: Entering directory `/tmp/buildd/cryptmount-2.1/man'
> > sed "s,@PACKAGE_VERSION\@,2.1,g; s,@etcdir\@,/etc/cryptmount,g;
> > s,@DFLT_CIPHER\@,aes,g; s,@DFLT_KEYHASH\@,,g; s,@DFLT_KEYCIPHER\@,,g;
> > /^___DELETE_CSWAP_1/,/^___END_CSWAP_/d;
> > /^___DELETE_FSCK_1/,/^___END_FSCK_/d; /^___/d" cmtab.5.in > cmtab.5
> > sed "s,@PACKAGE_VERSION\@,2.1,g; s,@etcdir\@,/etc/cryptmount,g;
> > s,@DFLT_CIPHER\@,aes,g; s,@DFLT_KEYHASH\@,,g; s,@DFLT_KEYCIPHER\@,,g;
> > /^___DELETE_CSWAP_1/,/^___END_CSWAP_/d;
> > /^___DELETE_FSCK_1/,/^___END_FSCK_/d; /^___/d" cryptmount.8.in >
> > cryptmount.8
> > sed "s,@PACKAGE_VERSION\@,2.1,g; s,@etcdir\@,/etc/cryptmount,g;
> > s,@DFLT_CIPHER\@,aes,g; s,@DFLT_KEYHASH\@,,g; s,@DFLT_KEYCIPHER\@,,g;
> > /^___DELETE_CSWAP_1/,/^___END_CSWAP_/d;
> > /^___DELETE_FSCK_1/,/^___END_FSCK_/d; /^___/d" cryptmount-setup.8.in >
> > cryptmount-setup.8
> > make[4]: Leaving directory `/tmp/buildd/cryptmount-2.1/man'
> > make[3]: Leaving directory `/tmp/buildd/cryptmount-2.1/man'
> > make[3]: Entering directory `/tmp/buildd/cryptmount-2.1'
> > i486-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.
> > -DLOCALEDIR=\"/usr/share/locale\" -DCM_CONFIG_DIR="\"/etc/cryptmount\""
> > -DCM_MODULE_DIR="\"/usr/lib/cryptmount\"" -Wall -g -O2 -c cryptmount.c
> > i486-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.
> > -DLOCALEDIR=\"/usr/share/locale\" -DCM_CONFIG_DIR="\"/etc/cryptmount\""
> > -DCM_MODULE_DIR="\"/usr/lib/cryptmount\"" -Wall -g -O2 -c armour.c
> > i486-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.
> > -DLOCALEDIR=\"/usr/share/locale\" -DCM_CONFIG_DIR="\"/etc/cryptmount\""
> > -DCM_MODULE_DIR="\"/usr/lib/cryptmount\"" -Wall -g -O2 -c armour-builtin.c
> > i486-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.
> > -DLOCALEDIR=\"/usr/share/locale\" -DCM_CONFIG_DIR="\"/etc/cryptmount\""
> > -DCM_MODULE_DIR="\"/usr/lib/cryptmount\"" -Wall -g -O2 -c armour-gcry.c
> > i486-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.
> > -DLOCALEDIR=\"/usr/share/locale\" -DCM_CONFIG_DIR="\"/etc/cryptmount\""
> > -DCM_MODULE_DIR="\"/usr/lib/cryptmount\"" -Wall -g -O2 -c armour-ssl.c
> > i486-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.
> > -DLOCALEDIR=\"/usr/share/locale\" -DCM_CONFIG_DIR="\"/etc/cryptmount\""
> > -DCM_MODULE_DIR="\"/usr/lib/cryptmount\"" -Wall -g -O2 -c blowfish.c
> > i486-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.
> > -DLOCALEDIR=\"/usr/share/locale\" -DCM_CONFIG_DIR="\"/etc/cryptmount\""
> > -DCM_MODULE_DIR="\"/usr/lib/cryptmount\"" -Wall -g -O2 -c dmutils.c
> > i486-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.
> > -DLOCALEDIR=\"/usr/share/locale\" -DCM_CONFIG_DIR="\"/etc/cryptmount\""
> > -DCM_MODULE_DIR="\"/usr/lib/cryptmount\"" -Wall -g -O2 -c fsutils.c
> > i486-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.
> > -DLOCALEDIR=\"/usr/share/locale\" -DCM_CONFIG_DIR="\"/etc/cryptmount\""
> > -DCM_MODULE_DIR="\"/usr/lib/cryptmount\"" -Wall -g -O2 -c looputils.c
> > i486-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.
> > -DLOCALEDIR=\"/usr/share/locale\" -DCM_CONFIG_DIR="\"/etc/cryptmount\""
> > -DCM_MODULE_DIR="\"/usr/lib/cryptmount\"" -Wall -g -O2 -c tables.c
> > i486-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.
> > -DLOCALEDIR=\"/usr/share/locale\" -DCM_CONFIG_DIR="\"/etc/cryptmount\""
> > -DCM_MODULE_DIR="\"/usr/lib/cryptmount\"" -Wall -g -O2 -c utils.c
> > i486-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.
> > -DLOCALEDIR=\"/usr/share/locale\" -DCM_CONFIG_DIR="\"/etc/cryptmount\""
> > -DCM_MODULE_DIR="\"/usr/lib/cryptmount\"" -Wall -g -O2 -c cmtesting.c
> > i486-linux-gnu-gcc -Wall -g -O2 -o cryptmount cryptmount.o armour.o
> > armour-builtin.o armour-gcry.o armour-ssl.o blowfish.o dmutils.o fsutils.o
> > looputils.o tables.o utils.o cmtesting.o -ldevmapper
> > make[3]: Leaving directory `/tmp/buildd/cryptmount-2.1'
> > make[2]: Leaving directory `/tmp/buildd/cryptmount-2.1'
> > make[1]: Leaving directory `/tmp/buildd/cryptmount-2.1'
> > #docbook-to-man debian/cryptmount.sgml > cryptmount.1
> > touch build-stamp
> > fakeroot debian/rules binary
> > dh_testdir
> > dh_testroot
> > dh_clean -k
> > dh_installdirs
> > # Add here commands to install the package into debian/cryptmount.
> > /usr/bin/make install DESTDIR=/tmp/buildd/cryptmount-2.1/debian/cryptmount
> > make[1]: Entering directory `/tmp/buildd/cryptmount-2.1'
> > Making install in po
> > make[2]: Entering directory `/tmp/buildd/cryptmount-2.1/po'
> > mkdir -p -- /tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/share
> > installing fr.gmo as
> > /tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/share/locale/fr/LC_MESSAGES/cryptmount.mo
> > if test "cryptmount" = "gettext-tools"; then \
> > mkdir -p --
> > /tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/share/gettext/po; \
> > for file in Makefile.in.in remove-potcdate.sin quot.sed boldquot.sed
> > [EMAIL PROTECTED] [EMAIL PROTECTED] insert-header.sin Rules-quot
> > Makevars.template; do \
> > /usr/bin/install -c -m 644 ./$file \
> >
> > /tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/share/gettext/po/$file; \
> > done; \
> > for file in Makevars; do \
> > rm -f
> > /tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/share/gettext/po/$file; \
> > done; \
> > else \
> > : ; \
> > fi
> > make[2]: Leaving directory `/tmp/buildd/cryptmount-2.1/po'
> > Making install in man
> > make[2]: Entering directory `/tmp/buildd/cryptmount-2.1/man'
> > Making install in fr
> > make[3]: Entering directory `/tmp/buildd/cryptmount-2.1/man/fr'
> > make[4]: Entering directory `/tmp/buildd/cryptmount-2.1/man/fr'
> > make[4]: Nothing to be done for `install-exec-am'.
> > test -z "/usr/share/man/fr/man5" || mkdir -p --
> > "/tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/share/man/fr/man5"
> > /usr/bin/install -c -m 644 './cmtab.5'
> > '/tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/share/man/fr/man5/cmtab.5'
> > test -z "/usr/share/man/fr/man8" || mkdir -p --
> > "/tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/share/man/fr/man8"
> > /usr/bin/install -c -m 644 './cryptmount.8'
> > '/tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/share/man/fr/man8/cryptmount.8'
> > make[4]: Leaving directory `/tmp/buildd/cryptmount-2.1/man/fr'
> > make[3]: Leaving directory `/tmp/buildd/cryptmount-2.1/man/fr'
> > make[3]: Entering directory `/tmp/buildd/cryptmount-2.1/man'
> > make[4]: Entering directory `/tmp/buildd/cryptmount-2.1/man'
> > make[4]: Nothing to be done for `install-exec-am'.
> > test -z "/usr/share/man/man5" || mkdir -p --
> > "/tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/share/man/man5"
> > /usr/bin/install -c -m 644 './cmtab.5'
> > '/tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/share/man/man5/cmtab.5'
> > test -z "/usr/share/man/man8" || mkdir -p --
> > "/tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/share/man/man8"
> > /usr/bin/install -c -m 644 './cryptmount.8'
> > '/tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/share/man/man8/cryptmount.8'
> > /usr/bin/install -c -m 644 './cryptmount-setup.8'
> > '/tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/share/man/man8/cryptmount-setup.8'
> > make[4]: Leaving directory `/tmp/buildd/cryptmount-2.1/man'
> > make[3]: Leaving directory `/tmp/buildd/cryptmount-2.1/man'
> > make[2]: Leaving directory `/tmp/buildd/cryptmount-2.1/man'
> > make[2]: Entering directory `/tmp/buildd/cryptmount-2.1'
> > make[3]: Entering directory `/tmp/buildd/cryptmount-2.1'
> > test -z "/usr/bin" || mkdir -p --
> > "/tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/bin"
> > /usr/bin/install -c 'cryptmount'
> > '/tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/bin/cryptmount'
> > /usr/bin/make install-exec-hook
> > make[4]: Entering directory `/tmp/buildd/cryptmount-2.1'
> > if test ! -d "/tmp/buildd/cryptmount-2.1/debian/cryptmount/etc/cryptmount"
> > ; then \
> > mkdir -p --
> > "/tmp/buildd/cryptmount-2.1/debian/cryptmount/etc/cryptmount" ; \
> > /usr/bin/install -c -m 644 cmtab.example
> > "/tmp/buildd/cryptmount-2.1/debian/cryptmount/etc/cryptmount" ; \
> > fi
> > if test ! -f
> > "/tmp/buildd/cryptmount-2.1/debian/cryptmount/etc/cryptmount/cmtab" ; then \
> > echo -e "# /etc/cryptmount/cmtab - encrypted filesystem information
> > for cryptmount\n# try 'man 8 cryptmount' or 'man 5 cmtab' for more
> > details\n" >>
> > "/tmp/buildd/cryptmount-2.1/debian/cryptmount/etc/cryptmount/cmtab"; \
> > fi
> > sed 's,@EXENAME@,/usr/bin/cryptmount,g; s,@ETCDIR@,/etc/cryptmount,g;
> > s,@PKG_VERSION@,2.1,g' initscript.in > initscript
> > sed 's,@EXENAME@,/usr/bin/cryptmount,g; s,@ETCDIR@,/etc/cryptmount,g;
> > s,@PKG_VERSION@,2.1,g' initscript-early.in > initscript-early
> > if test -d "/tmp/buildd/cryptmount-2.1/debian/cryptmount/etc/init.d" ; then
> > \
> > /usr/bin/install -c initscript
> > "/tmp/buildd/cryptmount-2.1/debian/cryptmount/etc/init.d/cryptmount" ; \
> > /usr/bin/install -c initscript-early
> > "/tmp/buildd/cryptmount-2.1/debian/cryptmount/etc/init.d/cryptmount-early"
> > ; \
> > fi
> > if test -d "/tmp/buildd/cryptmount-2.1/debian/cryptmount/etc/default" -a !
> > -f "/tmp/buildd/cryptmount-2.1/debian/cryptmount/etc/default/cryptmount" ;
> > then \
> > /usr/bin/install -c -m 644 initdefaults
> > "/tmp/buildd/cryptmount-2.1/debian/cryptmount/etc/default/cryptmount" ; \
> > fi
> > test -z "cm-ssl.so cm-gcry.so" -o -d
> > "/tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/lib/cryptmount" || mkdir
> > -p "/tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/lib/cryptmount"
> > for mod in cm-ssl.so cm-gcry.so; do \
> > /bin/sh /tmp/buildd/cryptmount-2.1/install-sh -c -s -m 700
> > ${mod} "/tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/lib/cryptmount"; \
> > chown root.root
> > /tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/lib/cryptmount/${mod}; \
> > done
> > sed 's,@EXENAME@,/usr/bin/cryptmount,g; s,@ETCDIR@,/etc/cryptmount,g;
> > s,@PKG_VERSION@,2.1,g' setupscript.in > setupscript
> > /usr/bin/install -c setupscript
> > "/tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/sbin/cryptmount-setup"
> > chown root.root
> > /tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/bin/cryptmount
> > chmod u+srwx,go-w,go+r
> > /tmp/buildd/cryptmount-2.1/debian/cryptmount/usr/bin/cryptmount
> > make[4]: Leaving directory `/tmp/buildd/cryptmount-2.1'
> > make[3]: Nothing to be done for `install-data-am'.
> > make[3]: Leaving directory `/tmp/buildd/cryptmount-2.1'
> > make[2]: Leaving directory `/tmp/buildd/cryptmount-2.1'
> > make[1]: Leaving directory `/tmp/buildd/cryptmount-2.1'
> > dh_testdir
> > dh_testroot
> > dh_installchangelogs ChangeLog
> > dh_installdocs
> > dh_installexamples /tmp/buildd/cryptmount-2.1/cmtab.example
> > dh_installman
> > dh_link
> > dh_strip
> > dh_compress
> > dh_fixperms --exclude usr/bin/cryptmount
> > dh_installdeb
> > dh_shlibdeps
> > dh_gencontrol
> > dh_md5sums
> > dh_builddeb
> > dpkg-deb: building package `cryptmount' in `../cryptmount_2.1-1_i386.deb'.
> > dpkg-genchanges
> > dpkg-genchanges: including full source code in upload
> > dpkg-buildpackage: full upload (original source is included)
> > Copying back the cached apt archive contents
> > -> unmounting dev/pts filesystem
> > -> unmounting proc filesystem
> > -> cleaning the build env
> > -> removing directory /var/cache/pbuilder/build//18869 and its
> > subdirectories
> > Current time: Wed Aug 8 13:03:47 UTC 2007
> > pbuilder-time-stamp: 1186578227
> > Checking cryptmount_2.1-1_i386.deb for stripped binaries...
> > ---------------------------------------
> > /tmp/cryptmount_2.1-1_i386.deb/usr/lib/cryptmount/cm-gcry.so: ELF 32-bit
> > LSB shared object, Intel 80386, version 1 (SYSV), stripped
> > /tmp/cryptmount_2.1-1_i386.deb/usr/lib/cryptmount/cm-ssl.so: ELF 32-bit LSB
> > shared object, Intel 80386, version 1 (SYSV), stripped
> >
> > ...done
> > Removing result files...
> > ...done
> > ******************************************************************************
> > Finished with status BUILD_FAILED at 2007-08-08 13:03:53.079687
> > Build needed 0:07:11.204575
>
> --
> Julien Danjou
> .''`. Debian Developer
> : :' : http://julien.danjou.info
> `. `' http://people.debian.org/~acid
> `- 9A0D 5FD9 EB42 22F6 8974 C95C A462 B51E C2FE E5CD
>
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
