Package: linux-image-2.6.22-1-amd64
Version: 2.6.22-1
Severity: normal
When using this kernel, the time of the system runs too slow. Minutes to
slow in a couple of hours. This also confuses the ntp daemon.
-- Package-specific info:
** Version:
Linux version 2.6.22-1-amd64 (Debian 2.6.22-1) ([EMAIL PROTECTED]) (gcc version
4.1.3 20070629 (prerelease) (Debian 4.1.2-13)) #1 SMP Mon Jul 16 00:30:42 UTC
2007
** Not tainted
** Kernel log:
ide0 at 0x7000-0x7007,0x7402 on irq 16
Probing IDE interface ide1...
hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: [EMAIL PROTECTED]
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
agpgart: Detected an Intel 965G Chipset.
agpgart: Detected 7676K stolen memory.
agpgart: AGP aperture is 256M @ 0xe0000000
input: PC Speaker as /class/input/input1
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
usb0: register 'plusb' at usb-0000:00:1d.2-2, Prolific PL-2301/PL-2302,
7a:29:1b:44:29:73
usbcore: registered new interface driver plusb
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
pnp: the driver 'parport_pc' has been registered
pnp: match found with the PnP device '00:07' and the driver 'parport_pc'
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
EXT3 FS on dm-1, internal journal
loop: module loaded
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
it87: Found IT8718F chip at 0x290, revision 2
it87: in3 is VCC (+5V)
coretemp coretemp.0: Using undocumented features, absolute temperature might be
wrong!
coretemp coretemp.1: Using undocumented features, absolute temperature might be
wrong!
kjournald starting. Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-6, external journal on dm-8
EXT3-fs: mounted filesystem with writeback data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-9, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-10, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2097144k swap on /dev/mapper/VG01-LVSWAP. Priority:20 extents:1
across:2097144k
Adding 2097144k swap on /dev/mapper/VG02-LVSWAP2. Priority:20 extents:1
across:2097144k
r8169: eth3: link up
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
process `syslogd' is using obsolete setsockopt SO_BSDCOMPAT
input: Power Button (FF) as /class/input/input3
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input4
ACPI: Power Button (CM) [PWRB]
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
eth3: no IPv6 routers present
Loading iSCSI transport class v2.0-724.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
netconsole: local port 6665
netconsole: local IP 192.168.64.100
netconsole: interface eth3
netconsole: remote port 25734
netconsole: remote IP 192.168.64.1
netconsole: remote ethernet address 00:11:d8:25:1e:86
netconsole: network logging started
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[drm] Initialized i915 1.6.0 20060119 on minor 0
kjournald starting. Commit interval 5 seconds
EXT3 FS on loop0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
a.out[28573]: segfault at 0000000100000000 rip 00002b1af4634ad0 rsp
00007fffb6961838 error 4
a.out[28620]: segfault at 00007fff0dfde020 rip 0000000000400b99 rsp
00007fff0dfdbdd0 error 4
bsod[29032]: segfault at 00000000100e4400 rip 00002b9d2446cad0 rsp
00007fff86b29a28 error 4
bsod[29033]: segfault at 00000000100e4400 rip 00002b91583a4ad0 rsp
00007fff52bf1af8 error 4
bsod[29079]: segfault at 0000000000404018 rip 0000000000400cc1 rsp
00007fff35da75d0 error 4
bsod[29088]: segfault at 0000000000404018 rip 0000000000400cc1 rsp
00007fff17ebc6e0 error 4
bsod[29102]: segfault at 0000000000404018 rip 0000000000400cc1 rsp
00007fff7849ccc0 error 4
bsod[29111]: segfault at 0000000000404018 rip 0000000000400cc1 rsp
00007fff26ac52f0 error 4
bsod[29120]: segfault at 0000000000404018 rip 0000000000400cc1 rsp
00007fff99fe7810 error 4
bsod[29128]: segfault at 0000000000404078 rip 0000000000400d16 rsp
00007fff365b7de0 error 4
bsod[29146]: segfault at 0000000000404078 rip 0000000000400d16 rsp
00007fffbd74ff70 error 4
bsod[29164]: segfault at 0000000000404078 rip 0000000000400d16 rsp
00007fffdbeb96e0 error 4
kjournald starting. Commit interval 5 seconds
EXT3 FS on loop0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
** Loaded modules:
Module Size Used by
blowfish 13184 0
cbc 9088 0
blkcipher 11012 1 cbc
cryptoloop 7552 0
i915 31232 1
drm 100776 2 i915
netconsole 7840 0
nfs 255192 0
lockd 73008 1 nfs
nfs_acl 8064 1 nfs
sunrpc 186632 4 nfs,lockd,nfs_acl
ib_iser 39288 0
rdma_cm 36212 1 ib_iser
ib_cm 37544 1 rdma_cm
iw_cm 14856 1 rdma_cm
ib_sa 27616 2 rdma_cm,ib_cm
ib_mad 42148 2 ib_cm,ib_sa
ib_core 63360 6 ib_iser,rdma_cm,ib_cm,iw_cm,ib_sa,ib_mad
ib_addr 12808 1 rdma_cm
iscsi_tcp 28160 0
libiscsi 30592 2 ib_iser,iscsi_tcp
scsi_transport_iscsi 35856 4 ib_iser,iscsi_tcp,libiscsi
ppdev 13704 0
lp 17352 0
button 13472 0
ac 10376 0
battery 15496 0
cpufreq_stats 10400 0
cpufreq_userspace 9472 0
cpufreq_powersave 6272 0
cpufreq_conservative 12424 0
cpufreq_ondemand 13328 0
freq_table 9600 2 cpufreq_stats,cpufreq_ondemand
ipv6 296840 47
coretemp 12544 0
it87 27408 0
hwmon_vid 7296 1 it87
i2c_isa 9344 1 it87
eeprom 12432 0
ns83820 24968 0
loop 23044 1 cryptoloop
tsdev 13312 0
snd_hda_intel 311968 0
snd_pcm_oss 48288 0
snd_pcm 89992 2 snd_hda_intel,snd_pcm_oss
snd_mixer_oss 21376 1 snd_pcm_oss
snd_seq_dummy 8452 0
snd_seq_oss 36736 0
snd_seq_midi 13504 0
snd_rawmidi 30624 1 snd_seq_midi
snd_seq_midi_event 12416 2 snd_seq_oss,snd_seq_midi
snd_seq 58752 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 28424 2 snd_pcm,snd_seq
snd_seq_device 12820 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
i2c_i801 13468 0
snd 65896 9
snd_hda_intel,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
iTCO_wdt 15824 0
parport_pc 42664 1
parport 44428 3 ppdev,lp,parport_pc
plusb 7424 0
usbnet 24584 1 plusb
i2c_core 31488 4 it87,i2c_isa,eeprom,i2c_i801
psmouse 45468 0
serio_raw 11780 0
mii 10240 1 usbnet
pcspkr 7680 0
intel_agp 32032 1
soundcore 13088 1 snd
snd_page_alloc 14608 2 snd_hda_intel,snd_pcm
evdev 15232 0
ext3 137232 9
jbd 68080 1 ext3
mbcache 13832 1 ext3
dm_mirror 26240 0
dm_snapshot 21320 0
dm_mod 63984 25 dm_mirror,dm_snapshot
ide_cd 44832 0
cdrom 39848 1 ide_cd
sd_mod 33280 5
ata_generic 13188 0
ata_piix 19844 1
ahci 28676 2
libata 132016 3 ata_generic,ata_piix,ahci
r8169 36488 0
jmicron 8576 0 [permanent]
scsi_mod 164536 6
ib_iser,iscsi_tcp,libiscsi,scsi_transport_iscsi,sd_mod,libata
generic 10372 0 [permanent]
ide_core 147728 3 ide_cd,jmicron,generic
ehci_hcd 37900 0
uhci_hcd 29856 0
thermal 19600 0
processor 39784 1 thermal
fan 9992 0
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation P965/G965 Memory Controller Hub
[8086:29a0] (rev 02)
Subsystem: Giga-byte Technology Unknown device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation G965 Integrated
Graphics Controller [8086:29a2] (rev 02) (prog-if 00 [VGA])
Subsystem: Giga-byte Technology Unknown device [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f2100000 (32-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at a400 [size=8]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
#4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at b400 [size=32]
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
#5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at a000 [size=32]
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
#2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f2205000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio
Controller [8086:284b] (rev 02)
Subsystem: Giga-byte Technology Unknown device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f2200000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00005000-00005fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 4 [8086:2845] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00007000-00008fff
Memory behind bridge: f2000000-f20fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.4 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express
Port 5 [8086:2847] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00006000-00006fff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
#1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at a800 [size=32]
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
#2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at ac00 [size=32]
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI
#3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b000 [size=32]
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI
#1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5006]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f2204000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 00009000-00009fff
Memory behind bridge: f0000000-f1ffffff
Prefetchable memory behind bridge: 0000000080000000-00000000800fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HB/HR (ICH8/R) LPC Interface
Controller [8086:2810] (rev 02)
Subsystem: Giga-byte Technology Unknown device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 4 port
SATA IDE Controller [8086:2820] (rev 02) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: Giga-byte Technology Unknown device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at b800 [size=8]
Region 1: I/O ports at bc00 [size=4]
Region 2: I/O ports at c000 [size=8]
Region 3: I/O ports at c400 [size=4]
Region 4: I/O ports at c800 [size=16]
Region 5: I/O ports at cc00 [size=16]
Capabilities: <access denied>
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller
[8086:283e] (rev 02)
Subsystem: Giga-byte Technology Unknown device [1458:5001]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f2206000 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0500 [size=32]
00:1f.5 IDE interface [0101]: Intel Corporation 82801H (ICH8 Family) 2 port
SATA IDE Controller [8086:2825] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Unknown device [1458:b002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at d400 [size=8]
Region 1: I/O ports at d800 [size=4]
Region 2: I/O ports at dc00 [size=8]
Region 3: I/O ports at e000 [size=4]
Region 4: I/O ports at e400 [size=16]
Region 5: I/O ports at e800 [size=16]
Capabilities: <access denied>
02:00.0 SATA controller [0106]: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller [197b:2363] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Giga-byte Technology Unknown device [1458:b000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 5: Memory at f2000000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
02:00.1 IDE interface [0101]: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller [197b:2363] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Unknown device [1458:b000]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at 7000 [size=8]
Region 1: I/O ports at 7400 [size=4]
Region 2: I/O ports at 7800 [size=8]
Region 3: I/O ports at 7c00 [size=4]
Region 4: I/O ports at 8000 [size=16]
Capabilities: <access denied>
04:00.0 Serial controller [0700]: Timedia Technology Co Ltd PCI2S550 (Dual
16550 UART) [1409:7168] (rev 01) (prog-if 02 [16550])
Subsystem: Timedia Technology Co Ltd Unknown device [1409:4037]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at 9000 [size=32]
04:01.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8169
Gigabit Ethernet [10ec:8169] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8169 Gigabit Ethernet
[10ec:8169]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 9400 [size=256]
Region 1: Memory at f1000000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 80000000 [disabled] [size=64K]
Capabilities: <access denied>
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.22-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.22-1-amd64 depends on:
ii e2fsprog 1.39+1.40-WIP-2006.11.14+dfsg-2 ext2 file system utilities and lib
ii initramf 0.88 tools for generating an initramfs
ii module-i 3.3-pre11-1 tools for managing Linux kernel mo
linux-image-2.6.22-1-amd64 recommends no packages.
-- debconf information:
linux-image-2.6.22-1-amd64/preinst/initrd-2.6.22-1-amd64:
linux-image-2.6.22-1-amd64/preinst/lilo-initrd-2.6.22-1-amd64: true
linux-image-2.6.22-1-amd64/postinst/old-dir-initrd-link-2.6.22-1-amd64: true
linux-image-2.6.22-1-amd64/preinst/abort-install-2.6.22-1-amd64:
linux-image-2.6.22-1-amd64/postinst/kimage-is-a-directory:
linux-image-2.6.22-1-amd64/preinst/overwriting-modules-2.6.22-1-amd64: true
linux-image-2.6.22-1-amd64/postinst/bootloader-test-error-2.6.22-1-amd64:
linux-image-2.6.22-1-amd64/postinst/create-kimage-link-2.6.22-1-amd64: true
linux-image-2.6.22-1-amd64/postinst/old-system-map-link-2.6.22-1-amd64: true
linux-image-2.6.22-1-amd64/preinst/elilo-initrd-2.6.22-1-amd64: true
linux-image-2.6.22-1-amd64/preinst/lilo-has-ramdisk:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.22-1-amd64/preinst/already-running-this-2.6.22-1-amd64:
linux-image-2.6.22-1-amd64/postinst/depmod-error-2.6.22-1-amd64: false
linux-image-2.6.22-1-amd64/postinst/bootloader-error-2.6.22-1-amd64:
linux-image-2.6.22-1-amd64/prerm/would-invalidate-boot-loader-2.6.22-1-amd64:
true
linux-image-2.6.22-1-amd64/preinst/failed-to-move-modules-2.6.22-1-amd64:
linux-image-2.6.22-1-amd64/postinst/old-initrd-link-2.6.22-1-amd64: true
linux-image-2.6.22-1-amd64/prerm/removing-running-kernel-2.6.22-1-amd64: true
linux-image-2.6.22-1-amd64/preinst/bootloader-initrd-2.6.22-1-amd64: true
linux-image-2.6.22-1-amd64/preinst/abort-overwrite-2.6.22-1-amd64:
linux-image-2.6.22-1-amd64/postinst/depmod-error-initrd-2.6.22-1-amd64: false
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
