Subject: evolution: SIGPIPE after entering password for e-mail account Package: evolution Version: 2.10.2-1 Severity: normal
*** Please type your report below this line ***
Hi,
I just set up a new e-mail account (googlemail.com). Evolution asked me
for the password and I got a SIGPIPE and the following backtrace.
(gdb) bt full
#0 0xb7fab7f2 in ?? () from /lib/ld-linux.so.2
No symbol table info available.
#1 0xb77e9638 in send () from /lib/i686/cmov/libpthread.so.0
No symbol table info available.
#2 0xb7c81153 in pt_Send (fd=0xb2ff8e78, buf=0xb1753908, amount=52, flags=0,
timeout=4294967295) at ptio.c:1903
syserrno = <value optimized out>
bytes = -1
fNeedContinue = <value optimized out>
#3 0xb6c84996 in ssl_DefSend (ss=0xb2ffc080, buf=0xb1753908 "\027\003",
len=52, flags=0) at ssldef.c:128
rv = 47
lower = (PRFileDesc *) 0xb2ff8e78
sent = 0
#4 0xb6c76482 in ssl3_SendRecord (ss=0xb2ffc080, type=<value optimized out>,
pIn=0xb17d4c48 "USER [EMAIL PROTECTED]", nIn=31, flags=0)
at ssl3con.c:2010
sent = -32
wrBuf = (sslBuffer *) 0xb2ffc0b8
rv = <value optimized out>
totalSent = 0
#5 0xb6c78b06 in ssl3_SendApplicationData (ss=0xb2ffc080,
in=0xb17d4c48 "USER [EMAIL PROTECTED]", len=31, flags=0)
---Type <return> to continue, or q <return> to quit---
at ssl3con.c:2087
sent = <value optimized out>
totalSent = 0
discarded = 0
#6 0xb6c86cce in ssl_SecureSend (ss=0xb2ffc080,
buf=0xb17d4c48 "USER [EMAIL PROTECTED]", len=31, flags=0)
at sslsecur.c:1128
rv = <value optimized out>
#7 0xb6c86e33 in ssl_SecureWrite (ss=0xb2ffc080,
buf=0xb17d4c48 "USER [EMAIL PROTECTED]", len=31)
at sslsecur.c:1145
No locals.
#8 0xb6c89666 in ssl_Write (fd=0xb582cb78, buf=0xb17d4c48, len=31)
at sslsock.c:1455
ss = (sslSocket *) 0xb2ffc080
rv = -1
#9 0xb7c6803f in PR_Write (fd=0xb582cb78, buf=0xb17d4c48, amount=31)
at priometh.c:146
No locals.
#10 0xb7e1f587 in stream_write (stream=0xb5811ca0,
buffer=0xb17d4c48 "USER [EMAIL PROTECTED]", n=31)
at camel-tcp-stream-ssl.c:483
res = <value optimized out>
---Type <return> to continue, or q <return> to quit---
sockopts = {option = PR_SockOpt_Nonblocking, value = {ip_ttl = 1,
mcast_ttl = 1, tos = 1, non_blocking = 1, reuse_addr = 1, keep_alive = 1,
mcast_loopback = 1, no_delay = 1, broadcast = 1, max_segment = 1,
recv_buffer_size = 1, send_buffer_size = 1, linger = {polarity = 1,
linger = 3067979056}, add_member = {mcaddr = {raw = {family = 1,
data = "\000\0000�ݶ\020\000`�ؽ��"}, inet = {family = 1, port = 0,
ip = 3067979056, pad = "\020\000`�ؽ��"}, ipv6 = {family = 1,
port = 0, flowinfo = 3067979056, ip = {_S6_un = {
_S6_u8 = "\020\000`�ؽ������\020\000`�", _S6_u16 = {16, 45920,
48600, 45823, 57332, 46826, 16, 45920}, _S6_u32 = {3009413136,
3003104728, 3068846068, 3009413136}, _S6_u64 = {
12898236596232388624, 12925331002341646324}}}, scope_id = 32},
local = {family = 1,
path = "\000\0000�ݶ\020\000`�ؽ������\020\000`�
\000\000\000\000\000��\016\215ݶ\020\000`� \000\000\000����\037\000\000\000
\000\000\000\b�_���ܶؽ��ؽ��\037\000\000\000ؽ��\000\000\000\000\037\000\000\000\000\200��ؽ��ؽ��ؽ��ؽ"}},
ifaddr = {raw = {family = 48631, data = "��<���ؽ��<���"}, inet = {
family = 48631, port = 45823, ip = 3003104828, pad = "ؽ��<���"},
ipv6 = {family = 48631, port = 45823, flowinfo = 3003104828, ip = {
_S6_un = {_S6_u8 = "ؽ��<���\000\000\000\000\000\000\000",
_S6_u16 = {48600, 45823, 48700, 45823, 0, 0, 0, 0}, _S6_u32 = {
3003104728, 3003104828, 0, 0}, _S6_u64 = {
12898237025722809816, 0}}}, scope_id = 0}, local = {
---Type <return> to continue, or q <return> to quit---
family = 48631,
path = "��<���ؽ��<���", '\0' <repeats 20 times>,
"����\000\000\000\000$\000`�\000\000\000�\000\000\000\000\020\000`�\210�����_�0�ݶ\000\000\000\000\210���P\003Ϸ�����fݶ�xܷh���\032\000\000\000P\v"}}},
drop_member = {mcaddr = {
raw = {family = 1, data = "\000\0000�ݶ\020\000`�ؽ��"}, inet = {
family = 1, port = 0, ip = 3067979056, pad = "\020\000`�ؽ��"},
ipv6 = {family = 1, port = 0, flowinfo = 3067979056, ip = {_S6_un = {
_S6_u8 = "\020\000`�ؽ������\020\000`�", _S6_u16 = {16, 45920,
48600, 45823, 57332, 46826, 16, 45920}, _S6_u32 = {3009413136,
3003104728, 3068846068, 3009413136}, _S6_u64 = {
12898236596232388624, 12925331002341646324}}}, scope_id = 32},
local = {family = 1,
path = "\000\0000�ݶ\020\000`�ؽ������\020\000`�
\000\000\000\000\000��\016\215ݶ\020\000`� \000\000\000����\037\000\000\000
\000\000\000\b�_���ܶؽ��ؽ��\037\000\000\000ؽ��\000\000\000\000\037\000\000\000\000\200��ؽ��ؽ��ؽ��ؽ"}},
ifaddr = {raw = {family = 48631, data = "��<���ؽ��<���"}, inet = {
family = 48631, port = 45823, ip = 3003104828, pad = "ؽ��<���"},
ipv6 = {family = 48631, port = 45823, flowinfo = 3003104828, ip = {
_S6_un = {_S6_u8 = "ؽ��<���\000\000\000\000\000\000\000",
_S6_u16 = {48600, 45823, 48700, 45823, 0, 0, 0, 0}, _S6_u32 = {
3003104728, 3003104828, 0, 0}, _S6_u64 = {
12898237025722809816, 0}}}, scope_id = 0}, local = {
family = 48631,
---Type <return> to continue, or q <return> to quit---
path = "��<���ؽ��<���", '\0' <repeats 20 times>,
"����\000\000\000\000$\000`�\000\000\000�\000\000\000\000\020\000`�\210�����_�0�ݶ\000\000\000\000\210���P\003Ϸ�����fݶ�xܷh���\032\000\000\000P\v"}}},
mcast_if = {raw = {
family = 1, data = "\000\0000�ݶ\020\000`�ؽ��"}, inet = {family = 1,
port = 0, ip = 3067979056, pad = "\020\000`�ؽ��"}, ipv6 = {
family = 1, port = 0, flowinfo = 3067979056, ip = {_S6_un = {
_S6_u8 = "\020\000`�ؽ������\020\000`�", _S6_u16 = {16, 45920,
48600, 45823, 57332, 46826, 16, 45920}, _S6_u32 = {3009413136,
3003104728, 3068846068, 3009413136}, _S6_u64 = {
12898236596232388624, 12925331002341646324}}}, scope_id = 32},
local = {family = 1,
path = "\000\0000�ݶ\020\000`�ؽ������\020\000`�
\000\000\000\000\000��\016\215ݶ\020\000`� \000\000\000����\037\000\000\000
\000\000\000\b�_���ܶؽ��ؽ��\037\000\000\000ؽ��\000\000\000\000\037\000\000\000\000\200��ؽ��ؽ��ؽ��ؽ"}}}}
pollfds = {{fd = 0xb582cb78, in_flags = 2, out_flags = 40}, {
fd = 0xb5811bf0, in_flags = 1, out_flags = 0}}
nonblock = 0
error = <value optimized out>
w = -1317188536
written = 0
cancel_fd = (PRFileDesc *) 0xb5811bf0
#11 0xb7dd0456 in camel_stream_write (stream=0xb5811ca0,
---Type <return> to continue, or q <return> to quit---
buffer=0xb17d4c48 "USER [EMAIL PROTECTED]", n=31)
at camel-stream.c:119
__PRETTY_FUNCTION__ = "camel_stream_write"
#12 0xb634d6bc in stream_write (stream=0xb580e5b0,
buffer=0xb17d4c48 "USER [EMAIL PROTECTED]", n=31)
at camel-pop3-stream.c:157
No locals.
#13 0xb7dd0456 in camel_stream_write (stream=0xb580e5b0,
buffer=0xb17d4c48 "USER [EMAIL PROTECTED]", n=31)
at camel-stream.c:119
__PRETTY_FUNCTION__ = "camel_stream_write"
#14 0xb634ac26 in camel_pop3_engine_command_new (pe=0xb58107a8, flags=0,
func=0, data=0x0, fmt=0xb634f74f "USER %s\r\n") at camel-pop3-engine.c:263
ap = 0xb15fb1b4 "
#15 0xb634e8d8 in pop3_try_authenticate (service=0xb58018e4,
reprompt=<value optimized out>,
errmsg=0xb2ffbdf8 "Bitte geben Sie das POP-\200��� ��� für [EMAIL
PROTECTED] 黶�\r��\020", ex=0x10b124bc) at camel-pop3-store.c:488
flags = 4
pcu = <value optimized out>
pcp = <value optimized out>
status = 0
#16 0xb634edf9 in pop3_connect (service=0xb58018e4, ex=0x10b124bc)
---Type <return> to continue, or q <return> to quit---
at camel-pop3-store.c:600
reprompt = -1211579052
session = <value optimized out>
errbuf = 0x0
status = -1317188576
#17 0xb7e156ff in camel_service_connect (service=0xb58018e4, ex=0x10b124bc)
at camel-service.c:369
ret = <value optimized out>
unreg = 0
__PRETTY_FUNCTION__ = "camel_service_connect"
#18 0xb7e16b12 in camel_session_get_service_connected (session=0x80b6564,
url_string=0x10ad45b0 "pop://[EMAIL PROTECTED]/;use_ssl=always",
type=CAMEL_PROVIDER_STORE, ex=0x10b124bc)
at camel-session.c:269
svc = (CamelService *) 0xffffffe0
#19 0xb642b5a2 in mail_tool_get_inbox (
url=0x10ad45b0 "pop://[EMAIL PROTECTED]/;use_ssl=always", ex=0x10b124bc) at
mail-tools.c:70
folder = (CamelFolder *) 0x0
#20 0xb6425bc6 in fetch_mail_fetch (mm=0x10b124a0) at mail-ops.c:299
folder = <value optimized out>
i = <value optimized out>
#21 0xb6420a35 in mail_msg_received (e=0x80d99b8, msg=0x10b124a0, data=0x0)
---Type <return> to continue, or q <return> to quit---
at mail-mt.c:582
text = 0xb2ff8e78 "`�ȷ(�\202�"
#22 0xb7baab60 in thread_dispatch (din=0x80d99b8) at e-msgport.c:1005
e = <value optimized out>
m = (EMsg *) 0x10b124a0
info = <value optimized out>
self = 2975841168
#23 0xb77e231b in start_thread () from /lib/i686/cmov/libpthread.so.0
No symbol table info available.
#24 0xb6e3f8ee in clone () from /lib/i686/cmov/libc.so.6
No symbol table info available.
After entering continue in gdb I got the same error. Entering continue
another time evolution worked again. I could then reproduce the same
behavior. After having restarted evolution, I cannot reproduce this bug
anymore.
Thanks
Paul
-- System Information:
Debian Release: lenny/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 2.6.21-2-686 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages evolution depends on:
ii dbus 1.1.1-3 simple interprocess messaging syst
ii evolution-common 2.10.2-1 architecture independent files for
ii evolution-data-server 1.10.2-2 evolution database backend server
ii gconf2 2.18.0.1-3 GNOME configuration database syste
ii gnome-icon-theme 2.18.0-3 GNOME Desktop icon theme
ii gtkhtml3.14 3.14.2-1 HTML rendering/editing library - b
ii libart-2.0-2 2.3.19-3 Library of functions for 2D graphi
ii libatk1.0-0 1.18.0-2 The ATK accessibility toolkit
ii libbonobo2-0 2.18.0-2 Bonobo CORBA interfaces library
ii libbonoboui2-0 2.18.0-5 The Bonobo UI library
ii libc6 2.5-11 GNU C Library: Shared libraries
ii libcairo2 1.4.10-1 The Cairo 2D vector graphics libra
ii libcamel1.2-10 1.10.2-2 The Evolution MIME message handlin
ii libdbus-1-3 1.1.1-3 simple interprocess messaging syst
ii libdbus-glib-1-2 0.74-1 simple interprocess messaging syst
ii libebook1.2-9 1.10.2-2 Client library for evolution addre
ii libecal1.2-7 1.10.2-2 Client library for evolution calen
ii libedataserver1.2-9 1.10.2-2 Utility library for evolution data
ii libedataserverui1.2-8 1.10.2-2 GUI utility library for evolution
ii libegroupwise1.2-13 1.10.2-2 Client library for accessing group
ii libexchange-storage1.2- 1.10.2-2 Backend library for evolution cale
ii libfontconfig1 2.4.2-1.2 generic font configuration library
ii libfreetype6 2.2.1-6 FreeType 2 font engine, shared lib
ii libgconf2-4 2.18.0.1-3 GNOME configuration database syste
ii libglade2-0 1:2.6.1-1 library to load .glade files at ru
ii libglib2.0-0 2.12.12-1 The GLib library of C routines
ii libgnome-keyring0 0.8.1-2 GNOME keyring services library
ii libgnome-pilot2 2.0.15-2 Support libraries for gnome-pilot
ii libgnome2-0 2.18.0-4 The GNOME 2 library - runtime file
ii libgnomecanvas2-0 2.14.0-3 A powerful object-oriented display
ii libgnomeprint2.2-0 2.18.0-2 The GNOME 2.2 print architecture -
ii libgnomeprintui2.2-0 2.18.0-2 GNOME 2.2 print architecture User
ii libgnomeui-0 2.18.1-2 The GNOME 2 libraries (User Interf
ii libgnomevfs2-0 1:2.18.1-3+b1 GNOME Virtual File System (runtime
ii libgnutls13 1.6.3-1 the GNU TLS library - runtime libr
ii libgtk2.0-0 2.10.13-1 The GTK+ graphical user interface
ii libgtkhtml3.14-19 3.14.2-1 HTML rendering/editing library - r
ii libhal1 0.5.9.1-2 Hardware Abstraction Layer - share
ii libice6 1:1.0.3-2 X11 Inter-Client Exchange library
ii libldap2 2.1.30-13.4 OpenLDAP libraries
ii libnm-glib0 0.6.4-8+b1 network management framework (GLib
ii libnotify1 [libnotify1- 0.4.4-3 sends desktop notifications to a n
ii libnspr4-0d 4.6.7-1 NetScape Portable Runtime Library
ii libnss3-0d 3.11.7-1 Network Security Service libraries
ii liborbit2 1:2.14.7-0.1 libraries for ORBit2 - a CORBA ORB
ii libpango1.0-0 1.16.4-1 Layout and rendering of internatio
ii libpisock9 0.12.2-10 library for communicating with a P
ii libpisync0 0.12.2-10 synchronization library for PalmOS
ii libpng12-0 1.2.15~beta5-2 PNG library - runtime
ii libpopt0 1.10-3 lib for parsing cmdline parameters
ii libsm6 2:1.0.3-1 X11 Session Management library
ii libsoup2.2-8 2.2.100-1 an HTTP library implementation in
ii libx11-6 2:1.0.3-7 X11 client-side library
ii libxcursor1 1:1.1.8-2 X cursor management library
ii libxext6 1:1.0.3-2 X11 miscellaneous extension librar
ii libxfixes3 1:4.0.3-2 X11 miscellaneous 'fixes' extensio
ii libxi6 2:1.1.1-1 X11 Input extension library
ii libxinerama1 1:1.0.2-1 X11 Xinerama extension library
ii libxml2 2.6.29.dfsg-1 GNOME XML library
ii libxrandr2 2:1.2.1-1 X11 RandR extension library
ii libxrender1 1:0.9.2-1 X Rendering Extension client libra
ii zlib1g 1:1.2.3.3.dfsg-3 compression library - runtime
Versions of packages evolution recommends:
pn evolution-plugins <none> (no description available)
ii gnome-desktop-data 2.18.3-1 Common files for GNOME 2 desktop a
pn gnome-pilot-conduits <none> (no description available)
pn spamassassin | bogofilter <none> (no description available)
ii yelp 2.18.1-1 Help browser for GNOME 2
-- no debconf information
signature.asc
Description: Dies ist ein digital signierter Nachrichtenteil
