Package: live-helper Version: 1.0~a15-1 Severity: normal --- Please enter the report below this line. --- Even if I do not delete the cache, every time I run make-live the following packages are downloaded again and again:
busybox casper file initramfs-tools klibc-utils libklibc libmagic1 libvolume-id0 linux-image-2.6.21-1-486 squashfs-modules-2.6.21-1-486 sudo udev unionfs-modules-2.6.21-1-486 user-setup In this case the kernel image is one I chosed by hand, but the problem is there even if I use the default images. I'm attaching the configuration files. Cheers --- System information. --- Architecture: amd64 Kernel: Linux 2.6.21.1-mactel Debian Release: lenny/sid 500 unstable www.debian-multimedia.org 500 unstable ftp.it.debian.org 500 testing security.debian.org --- Package information. --- Depends (Version) | Installed =============================-+-============= cdebootstrap (>= 0.3.15) | 0.4.3 OR debootstrap (>= 0.3.3.2) | 1.0.0 -- Enrico Tassi
# config/bootstrap - options for live-helper(7), bootstrap stage # $LIVE_ARCHITECTURE: select chroot architecture # (Default: autodetected) LIVE_ARCHITECTURE="i386" # $LIVE_BOOTSTRAP_CONFIG: set distribution config directory # (Default: empty) LIVE_BOOTSTRAP_CONFIG="" # $LIVE_BOOTSTRAP_FLAVOUR: select flavour to use # (Default: standard) LIVE_BOOTSTRAP_FLAVOUR="standard" # $LIVE_BOOTSTRAP_KEYRING: set distribution keyring # (Default: empty) LIVE_BOOTSTRAP_KEYRING="" # $LIVE_DISTRIBUTION: select distribution to use # (Default: etch) LIVE_DISTRIBUTION="etch" # $LIVE_MIRROR_BOOTSTRAP: set mirror to fetch packages from # (Default: http://ftp.debian.org/debian/) LIVE_MIRROR_BOOTSTRAP="http://ftp.debian.org/debian/"; # $LIVE_MIRROR_BOOTSTRAP_SECURITY: set security mirror to fetch packages from # (Default: http://security.debian.org/) LIVE_MIRROR_BOOTSTRAP_SECURITY="http://security.debian.org/"; # $LIVE_MIRROR_BINARY: set mirror which ends up in the image # (Default: http://ftp.debian.org/debian/) LIVE_MIRROR_BINARY="http://ftp.debian.org/debian/"; # $LIVE_MIRROR_BINARY_SECURITY: set security mirror which ends up in the image # (Default: http://security.debian.org/) LIVE_MIRROR_BINARY_SECURITY="http://security.debian.org/"; # $LIVE_SECTIONS: select section(s) to use # (Default: main contrib non-free) LIVE_SECTIONS="main contrib non-free"
# config/chroot - options for live-helper(7), chroot stage # $LIVE_CHROOT_FILESYSTEM: set chroot filesystem # (Default: squashfs) LIVE_CHROOT_FILESYSTEM="squashfs" # $LIVE_HOOKS: set hook commands # (Default: empty) LIVE_HOOKS="" # $LIVE_INTERACTIVE: set interactive build # (Default: disabled) LIVE_INTERACTIVE="disabled" # $LIVE_KEYRING_PACKAGES: set keyring packages # (Default: empty) LIVE_KEYRING_PACKAGES="" # $LIVE_LANGUAGE: set language to use # (Default: empty) LIVE_LANGUAGE="" # $LIVE_LINUX_FLAVOURS: set kernel flavour to use # (Default: autodetected) LIVE_LINUX_FLAVOURS="486" # $LIVE_LINUX_PACKAGES: set kernel packages to use # (Default: autodetected) LIVE_LINUX_PACKAGES="linux-image-2.6.21-1 squashfs-modules-2.6.21-1 unionfs-modules-2.6.21-1" # $LIVE_PACKAGES: set packages to install # (Default: empty) LIVE_PACKAGES="" # $LIVE_PACKAGES_LISTS: set package list to install # (Default: gnome-core) LIVE_PACKAGES_LISTS="gnome-core" # $LIVE_PRESEED: set package preseed # (Default: ) LIVE_PRESEED="" # $LIVE_TASKS: set tasks to install # (Default: empty) LIVE_TASKS="" # $LIVE_SECURITY: enable security updates # (Default: enabled) LIVE_SECURITY="enabled" # $LIVE_SYMLINKS: enable symlink convertion # (Default: disabled) LIVE_SYMLINKS="disabled" # $LIVE_SYSVINIT: enable sysvinit # (Default: disabled) LIVE_SYSVINIT="disabled"
# config/common - common options for live-helper(7) # $LH_APT: set package manager # (Default: aptitude) LH_APT="aptitude" # $LH_APT_FTPPROXY: set apt/aptitude ftp proxy # (Default: autodetected or empty) LH_APT_FTPPROXY="" # $LH_APT_HTTPPROXY: set apt/aptitude http proxy # (Default: autodetected or empty) LH_APT_HTTPPROXY="" # $LH_APT_PDIFFS: set apt/aptitude pdiff indices # (Default: enabled) LH_APT_PDIFFS="enabled" # $LH_APT_PIPELINE: set apt/aptitude pipeline depth # (Default: ) LH_APT_PIPELINE="" # $LH_APT_RECOMMENDS: set apt/aptitude recommends # (Default: enabled) LH_APT_RECOMMENDS="enabled" # $LH_APT_SECURE: set apt/aptitude security # (Default: enabled) LH_APT_SECURE="enabled" # $LH_BOOTSTRAP: set bootstrap program # (Default: cdebootstrap) LH_BOOTSTRAP="cdebootstrap" # $LH_CACHE_INDICES: control if downloaded package indices should be cached # (Default: disabled) LH_CACHE_INDICES="disabled" # $LH_CACHE_PACKAGES: control if downloaded packages files should be cached # (Default: enabled) LH_CACHE_PACKAGES="enabled" # $LH_CACHE_STAGES: control if completed stages should be cached # (Default: bootstrap) LH_CACHE_STAGES="bootstrap" # $LH_DEBCONF_FRONTEND: set debconf(1) frontend to use # (Default: noninteractive) LH_DEBCONF_FRONTEND="noninteractive" # $LH_DEBCONF_NOWARNINGS: set debconf(1) warnings # (Default: yes) LH_DEBCONF_NOWARNINGS="yes" # $LH_DEBCONF_PRIORITY: set debconf(1) priority to use # (Default: critical) LH_DEBCONF_PRIORITY="critical" # $LH_GENISOIMAGE: set genisoimage program # (Default: genisoimage) LH_GENISOIMAGE="genisoimage" # $LH_INITRAMFS: set initramfs hook # (Default: casper) LH_INITRAMFS="casper" # $LH_LOSETUP: set losetup program # (Default: autodetected) LH_LOSETUP="losetup" # $LH_MODE: set distribution mode # (Default: debian) LH_MODE="debian" # $LH_ROOT_COMMAND: use sudo or equivalent # (Default: empty) #LH_ROOT_COMMAND="sudo" # $LH_TASKSEL: set tasksel program # (Default: aptitude) LH_TASKSEL="aptitude" # $LIVE_ROOT: set root directory # (Default: debian-live) LIVE_ROOT="debian-live" # $LIVE_INCLUDES: set includes # (Default: /usr/share/live-helper/includes) LIVE_INCLUDES="/usr/share/live-helper/includes" # $LIVE_TEMPLATES: set templates # (Default: debian-live/config/templates) LIVE_TEMPLATES="debian-live/config/templates" # Live-helper options # $LH_BREAKPOINTS: enable breakpoints # (Default: disabled) #LH_BREAKPOINTS="disabled" # $LH_DEBUG: enable debug # (Default: disabled) #LH_DEBUG="disabled" # $LH_FORCE: enable force # (Default: disabled) #LH_FORCE="disabled" # $LH_QUIET: enable quiet # (Default: disabled) #LH_QUIET="disabled" # $LH_VERBOSE: enable verbose # (Default: disabled) #LH_VERBOSE="disabled"
# config/source - options for live-helper(7), source stage # $LIVE_SOURCE: set source option # (Default: disabled) LIVE_SOURCE="disabled" # $LIVE_SOURCE_IMAGES: set image type # (Default: tar) LIVE_SOURCE_IMAGES="tar"
