Hi! On Wed, May 23, 2007 at 11:30:17PM +0200, Martin Stigge wrote: > On Wed, 2007-05-09 at 09:38 +0900, Mattia Dongili wrote: > > > I'll do a bit more testing and will send you a diff for the adjusted > > > config.amd64 in the next 1-2 days. > > > > great, thanks! > > could you try using the i386 config as a starting point? or eventually > > just make sure that most of the modules/options enabled there are > > enabled on amd64 as well. > > Sorry for the delay. After some attempts do build a nice config.amd64 > which were unsuccessful since I felt I don't really know what I'm doing, > I tried again today and it went quite well. > > I started with your config.i386, fired up a "make menuconfing ARCH=um" > and the only thing I changed manually was to activate > CONFIG_CRYPTO_TWOFISH_X86_64 and CONFIG_CRYPTO_AES_X86_64 since they > were off by default. You find the new config.amd64 is attached. > > With this .config, the kernel compiled ok afaict (buildlog.amd64 > attached for the debian/rules build target), except that I got the > following at make linux:
No problem, they are usually harmless. ... > I could also successfully start the uml (user-mode-linux.output > attached) and it went nicely afaict. Of course, the debugging features > (like CONFIG_PRINTK_TIME which prints the timestamps on the boot output) > are still enabled, so they should be turned of before uploading. (But > they are also on in config.i386 - why that?) I like PRINTK_TIME ;) > Could I help with something else before an upload? Should I check > something specific inside the running uml? Are there some usual tests > you do? don't know, you may want to download the rootstrap sources, add the amd64 architecture here as well and try to build a root filesystem. If you don't have plenty of bandwidth don't worry and leave this alone. Well, I usually make sure that the kernel modules load, that a threaded apache2 works under stress and upload the package :) Sorry I don't have any automated test script, will have to provide one one day. Ok, I'll have a look at the whole stuff now. I'm preparing 2.6.21-1um, I'll ask for help if I can't get an updated config. Thanks for your kind help! -- mattia :wq! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
