* dmesg of 2.6.8-2-386 after boot and its lsmod : v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 7 9 10 11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 *10 11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 9 10 *11 12 14 15) ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fbf80 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbfb0, dseg 0xf0000 PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23 ACPI: PCI interrupt 0000:00:01.1[A] -> GSI 23 (level, low) -> IRQ 169 ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, low) -> IRQ 177 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, low) -> IRQ 185 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20 ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 20 (level, low) -> IRQ 193 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 23 (level, low) -> IRQ 169 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 22 (level, low) -> IRQ 177 ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 21 (level, low) -> IRQ 185 ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18 ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 18 (level, low) -> IRQ 201 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 19 (level, low) -> IRQ 209 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI interrupt 0000:01:0d.0[A] -> GSI 16 (level, low) -> IRQ 217 ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 217 ACPI: PCI interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 201 number of MP IRQ sources: 15. number of IO-APIC #2 registers: 24. testing the IO APIC....................... IO APIC #2...... .... register #00: 02000000 ....... : physical APIC id: 02 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 02000000 ....... : arbitration: 02 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 000 00 1 0 0 0 0 0 0 00 01 001 01 0 0 0 0 0 1 1 39 02 000 00 1 0 0 0 0 0 0 00 03 001 01 0 0 0 0 0 1 1 41 04 001 01 0 0 0 0 0 1 1 49 05 001 01 0 0 0 0 0 1 1 51 06 001 01 0 0 0 0 0 1 1 59 07 001 01 1 0 0 0 0 1 1 61 08 001 01 0 0 0 0 0 1 1 69 09 001 01 0 1 0 0 0 1 1 71 0a 001 01 0 0 0 0 0 1 1 79 0b 001 01 0 0 0 0 0 1 1 81 0c 001 01 0 0 0 0 0 1 1 89 0d 001 01 0 0 0 0 0 1 1 91 0e 001 01 0 0 0 0 0 1 1 99 0f 001 01 0 0 0 0 0 1 1 A1 10 001 01 1 1 0 1 0 1 1 D9 11 000 00 1 0 0 0 0 0 0 00 12 001 01 1 1 0 1 0 1 1 C9 13 001 01 1 1 0 1 0 1 1 D1 14 001 01 1 1 0 1 0 1 1 C1 15 001 01 1 1 0 1 0 1 1 B9 16 001 01 1 1 0 1 0 1 1 B1 17 001 01 1 1 0 1 0 1 1 A9 Using vector-based indexing IRQ to pin mappings: IRQ0 -> 0:2 IRQ1 -> 0:1 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ217 -> 0:16 IRQ201 -> 0:18 IRQ209 -> 0:19 IRQ193 -> 0:20 IRQ185 -> 0:21 IRQ177 -> 0:22 IRQ169 -> 0:23 .................................... done. PCI: Cannot allocate resource region 0 of device 0000:03:00.0 PCI: Cannot allocate resource region 3 of device 0000:05:00.0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 EISA: Probing bus 0 at eisa0 Cannot allocate resource for EISA slot 4 EISA: Detected 0 cards. NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: (supports S0 S1 S4 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4312 blocks [1 disk] into ram disk... done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 204k freed vesafb: probe of vesafb0 failed with error -6 NET: Registered protocol family 1 SCSI subsystem initialized libata version 1.02 loaded. sata_nv version 0.02 ACPI: PCI interrupt 0000:00:07.0[A] -> GSI 23 (level, low) -> IRQ 169 PCI: Setting latency timer of device 0000:00:07.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xF600 irq 169 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xF608 irq 169 nv_sata: Primary device added ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69 86:3e01 87:4063 88:007f ata1: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_nv nv_sata: Secondary device added ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4043 85:7c69 86:3e01 87:4043 88:007f ata2: dev 0 ATA, max UDMA/133, 398297088 sectors: lba48 ata2: dev 0 configured for UDMA/133 scsi1 : sata_nv Using anticipatory io scheduler Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC Type: Direct-Access ANSI SCSI revision: 05 ACPI: PCI interrupt 0000:00:08.0[A] -> GSI 22 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:08.0 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xF100 irq 177 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xF108 irq 177 ata3: no device found (phy stat 00000000) scsi2 : sata_nv ata4: no device found (phy stat 00000000) scsi3 : sata_nv sata_sil version 0.54 ACPI: PCI interrupt 0000:01:0d.0[A] -> GSI 16 (level, low) -> IRQ 217 ata5: SATA max UDMA/100 cmd 0xF882C080 ctl 0xF882C08A bmdma 0xF882C000 irq 217 ata6: SATA max UDMA/100 cmd 0xF882C0C0 ctl 0xF882C0CA bmdma 0xF882C008 irq 217 ata7: SATA max UDMA/100 cmd 0xF882C280 ctl 0xF882C28A bmdma 0xF882C200 irq 217 ata8: SATA max UDMA/100 cmd 0xF882C2C0 ctl 0xF882C2CA bmdma 0xF882C208 irq 217 ata5: no device found (phy stat 00000000) scsi4 : sata_sil ata6: no device found (phy stat 00000000) scsi5 : sata_sil ata7: no device found (phy stat 00000000) scsi6 : sata_sil ata8: no device found (phy stat 00000000) scsi7 : sata_sil SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sda: drive cache: write back /dev/scsi/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 > Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB) SCSI device sdb: drive cache: write back /dev/scsi/host1/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 > Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Adding 2650684k swap on /dev/sda7. Priority:-1 extents:1 Adding 506008k swap on /dev/sdb7. Priority:-2 extents:1 EXT3 FS on sda1, internal journal Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx hda: PIONEER DVD-RW DVR-108, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache Uniform CD-ROM driver Revision: 3.20 input: PS/2 Logitech Mouse on isa0060/serio1 ieee1394: Initialized config rom entry `ip1394' sbp2: $Rev: 1219 $ Ben Collins <[EMAIL PROTECTED]> Capability LSM initialized mice: PS/2 mouse device common for all mice ts: Compaq touchscreen protocol output device-mapper: 4.1.0-ioctl (2003-12-10) initialised: [EMAIL PROTECTED] kjournald starting. Commit interval 5 seconds EXT3 FS on sda9, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda8, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. ohci1394: $Rev: 1223 $ Ben Collins <[EMAIL PROTECTED]> ACPI: PCI interrupt 0000:01:0c.0[A] -> GSI 19 (level, low) -> IRQ 209 ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[209] MMIO=[fe9ff000-fe9ff7ff] Max Packet=[2048] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker http://www.scyld.com/network/ne2k-pci.html ACPI: PCI interrupt 0000:01:08.0[A] -> GSI 18 (level, low) -> IRQ 201 eth0: RealTek RTL-8029 found at 0xdf00, IRQ 201, 00:40:05:E4:DD:AD. ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc000078d53f] ip1394: $Rev: 1224 $ Ben Collins <[EMAIL PROTECTED]> ip1394: eth1: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0) usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci_hcd: block sizes: ed 64 td 64 ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, low) -> IRQ 177 ohci_hcd 0000:00:02.0: PCI device 10de:005a (nVidia Corporation) PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: irq 177, pci mem f8b17000 ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, low) -> IRQ 185 ehci_hcd 0000:00:02.1: PCI device 10de:005b (nVidia Corporation) PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: irq 185, pci mem f8b20000 ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0 NFORCE-CK804: chipset revision 162 NFORCE-CK804: not 100% native mode: will probe irqs later NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround. NFORCE-CK804: 0000:00:06.0 (rev a2) UDMA133 controller NFORCE-CK804: port 0x01f0 already claimed by ide0 ide1: BM-DMA at 0xfb08-0xfb0f, BIOS settings: hdc:DMA, hdd:DMA forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.29. ACPI: PCI interrupt 0000:00:0a.0[A] -> GSI 21 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:0a.0 to 64 eth2: forcedeth.c: subsystem: 01462:7125 bound to 0000:00:0a.0 cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: Address64 -------- Resource unparsed pciehp: Address64 -------- Resource unparsed pciehp: Address64 -------- Resource unparsed pciehp: PCI Express Hot Plug Controller Driver version: 0.4 shpchp: Address64 -------- Resource unparsed shpchp: Address64 -------- Resource unparsed shpchp: Address64 -------- Resource unparsed shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: shpc_init : shpc_cap_offset == 0 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Real Time Clock Driver v1.12 input: PC Speaker inserting floppy driver for 2.6.8-2-386 FDC 0 is a post-1991 82077 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] NET: Registered protocol family 17 NET: Registered protocol family 10 Disabled Privacy Extensions on device c02cc840(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present
lsmod : Module Size Used by ipv6 229764 6 af_packet 20872 2 parport_pc 33348 0 parport 37320 1 parport_pc floppy 54992 0 pcspkr 3816 0 rtc 12088 0 shpchp 87148 0 pciehp 83948 0 pci_hotplug 30640 2 shpchp,pciehp forcedeth 16256 0 amd74xx 13340 1 ehci_hcd 27908 0 ohci_hcd 19460 0 usbcore 104164 4 ehci_hcd,ohci_hcd eth1394 19976 0 ide_scsi 15492 0 ne2k_pci 9184 0 8390 9856 1 ne2k_pci ohci1394 32004 0 dm_mod 51068 0 tsdev 7168 0 mousedev 9996 2 evdev 9088 0 capability 4872 0 commoncap 7168 1 capability sbp2 22408 0 ieee1394 100408 3 eth1394,ohci1394,sbp2 psmouse 17800 0 ide_generic 1664 0 ide_disk 16768 0 ide_cd 38176 0 ide_core 125028 5 amd74xx,ide_scsi,ide_generic,ide_disk,ide_cd ext3 109672 5 jbd 54552 1 ext3 sr_mod 15780 0 cdrom 35740 2 ide_cd,sr_mod sd_mod 20480 9 sata_sil 7940 0 sata_nv 8324 7 libata 36228 2 sata_sil,sata_nv scsi_mod 115148 5 ide_scsi,sbp2,sr_mod,sd_mod,libata unix 26036 212 font 8576 0 vesafb 6688 0 cfbcopyarea 3840 1 vesafb cfbimgblt 3200 1 vesafb cfbfillrect 3712 1 vesafb -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
