Package: installation-reports Debian-installer-version: rc3, from the site on April 4th 2005 uname -a: Date: <Date and time of the install> Method: I booted the bussinesscard cd and installled over ftp from my local mirror (ftp.fi.debian.org)
Machine: Custom cobbled up box working as a server. Processor: Celeron 500mhz Memory: 128 Root Device: Ide, 40gig, /dev/hda Root Size/partition table: # fdisk -l /dev/hda Disk /dev/hda: 40.0 GB, 40020664320 bytes 255 heads, 63 sectors/track, 4865 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 243 1951866 83 Linux /dev/hda2 244 279 289170 82 Linux swap /dev/hda3 280 4865 36837045 8e Linux LVM # lvdisplay --- Logical volume --- LV Name /dev/mainvg/usr VG Name mainvg LV UUID 5Ng2vf-6Uvv-LtFo-dU6S-jZfh-eIRb-frbdG1 LV Write Access read/write LV Status available # open 1 LV Size 5.00 GB Current LE 1280 Segments 1 Allocation inherit Read ahead sectors 0 Block device 254:0 --- Logical volume --- LV Name /dev/mainvg/var VG Name mainvg LV UUID QYcM65-BR2n-t2bC-GJg0-FPAb-xv6p-V38Hmi LV Write Access read/write LV Status available # open 1 LV Size 2.00 GB Current LE 512 Segments 1 Allocation inherit Read ahead sectors 0 Block device 254:1 --- Logical volume --- LV Name /dev/mainvg/home VG Name mainvg LV UUID cn81Nm-S2Xk-1GOo-XVRG-ELLz-GtTp-qKeWwE LV Write Access read/write LV Status available # open 1 LV Size 20.00 GB Current LE 5120 Segments 1 Allocation inherit Read ahead sectors 0 Block device 254:2 # mount /dev/hda1 on / type ext3 (rw,errors=remount-ro) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) /dev/mapper/mainvg-home on /home type ext3 (rw) /dev/mapper/mainvg-usr on /usr type ext3 (rw) /dev/mapper/mainvg-var on /var type ext3 (rw) So a quite basic lvm setup Output of lspci and lspci -n: # lspci 0000:00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory Controller Hub (rev 02) 0000:00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics Controller] (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02) 0000:00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02) 0000:00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02) 0000:00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02) 0000:02:08.0 Ethernet controller: Advanced Micro Devices [AMD] 79c978 [HomePNA] (rev 52) 0000:02:09.0 Ethernet controller: Digital Equipment Corporation DECchip 21140 [FasterNet] (rev 20) 0000:02:0a.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI] (rev 01) # lspci -n 0000:00:00.0 0600: 8086:1130 (rev 02) 0000:00:02.0 0300: 8086:1132 (rev 02) 0000:00:1e.0 0604: 8086:2418 (rev 02) 0000:00:1f.0 0601: 8086:2410 (rev 02) 0000:00:1f.1 0101: 8086:2411 (rev 02) 0000:00:1f.2 0c03: 8086:2412 (rev 02) 0000:02:08.0 0200: 1022:2001 (rev 52) 0000:02:09.0 0200: 1011:0009 (rev 20) 0000:02:0a.0 0401: 1274:5000 (rev 01) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [E] Config network: [E] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: I had some problems because my other network card (the connected to the net) needed options and the other one was detected but no module got loaded (it uses de4x5). I finally managed by installing in expert mode. I had to compile acustom kernel (which i probably would have done anyway) to get the de4x5 card to work. Otherwise the install went fine, especially configuring lvm (it was my first time) was very easy. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
