On Mon, Apr 09, 2007 at 06:51:38PM +0200, Volker Ossenkopf wrote:
>Hi Matt,

Hi, Volker.

>thank you for the bug report, however, I cannot reproduce the problem.
>
>> When an audio CD is inserted, workman correctly displays tracking
>> listing.  When clicking play, the CD spins up and the time display
>> increments, but there is no audio.  The following message appears in
>> /var/log/syslog :
>> 
>> kernel: program workman is using a deprecated SCSI ioctl, please convert it 
>> to SG_IO
>> kernel: hdc: write_intr: wrong transfer direction!

>Can you provide me with the details of your hdc device settings
>(permissions, chain of links, configuration in terms of hdc driver
>kernel log)?

hdc is the master device on ide1; hdd is the slave.

Permissions:

brw-rw---- 1 root cdrom 22, 0 2007-04-06 18:21 /dev/hdc

I'm running workman as a user in the cdrom group.

Notes from /var/log/dmesg:

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 169
SIS5513: chipset revision 1
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
    ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
[...]
Probing IDE interface ide1...
hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
hdd: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15

Is there something else I can send you?

>> Kernel: Linux 2.6.18-4-k7
>
>Is this a precompiled kernel from etch or do you use some home-compiled
>kernel? Do you use standard udev?

Standard etch k7 kernel and udev.

>Thank you
>               Volker

Thanks,
Matt



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Reply via email to