On 3/27/07, Debian Bug Tracking System <[EMAIL PROTECTED]> wrote:
This is an automatic notification regarding your Bug report
#407773: wodim: Can't write to CD on external DVD writer,
which was filed against the wodim package.
It has been closed by Eduard Bloch <[EMAIL PROTECTED]>.
Their explanation is attached below. If this explanation is
unsatisfactory and you have not received a better one in a separate
message then please contact Eduard Bloch <[EMAIL PROTECTED]> by replying
to this email.
Debian bug tracking system administrator
(administrator, Debian Bugs database)
Unfortunately I still get this with wodim 1.1.3
System
-----------------------
K3b Version: 0.12.17
KDE Version: 3.5.5
QT Version: 3.3.7
Kernel: 2.6.20final_dccp
Devices
-----------------------
_NEC DVD_RW ND-1300A 1.08 (/dev/scd0, /dev/sg1) at [CD-R; CD-RW;
CD-ROM; DVD-ROM; DVD-R; DVD-RW; DVD+R; DVD+RW] [DVD-ROM; DVD-R
Sequential; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW;
DVD+R; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R;
RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite]
LG CD-ROM CRD-8482B 1.05 (/dev/hdc, ) at /media/cdrom0 [CD-ROM] [Error] [None]
CyberDrv CW099D CD-R/RW 120M (/dev/hdd, ) at /media/cdrom1 [CD-R;
CD-RW; CD-ROM] [CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P;
SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R]
Used versions
-----------------------
cdrecord: 2.1.1a03
cdrecord
-----------------------
scsidev: '2,0,0'
scsibus: 2 target: 0 lun: 0
Linux sg driver version: 3.5.34
Wodim version: 1.1.3
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : '_NEC '
Identification : 'DVD_RW ND-1300A '
Revision : '1.08'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x001B (DVD+R)
Profile: 0x001A (DVD+RW)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW)
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM) (current)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 1345536 = 1314 KB
FIFO size : 12582912 = 12288 KB
Track 01: data 698 MB
Total size: 802 MB (79:30.60) = 357795 sectors
Lout start: 802 MB (79:32/45) = 357795 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Is not unrestricted
Is not erasable
Disk sub type: Medium Type C, low Beta category (C-) (6)
ATIP start of lead in: -11231 (97:32/19)
ATIP start of lead out: 359846 (79:59/71)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 27
Manufacturer: Prodisc Technology Inc.
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 2051
Starting to write CD/DVD at speed 16.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
Speed set to 2822 KB/s
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 12 (Cannot allocate memory), write_g1 scsi sendcmd: no error
CDB: 2A 00 FF FF FF 6A 00 00 1F 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 200s
Writing pregap for track 1 at -150
write track pad data: error after 0 bytes
BFree: 0 K BSize: 1509 K
Starting new track at sector: 0
Errno: 12 (Cannot allocate memory), write_g1 scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1F 00
status: 0x0 (GOOD STATUS)
cmd finished after 0.000s timeout 200s
/usr/bin/X11/wodim: A write error occured.
/usr/bin/X11/wodim: Please properly read the error message above.
Track 01: 0 of 698 MB written.
write track data: error after 0 bytes
Writing time: 9.393s
Average write speed 952.2x.
Fixating...
Fixating time: 0.003s
/usr/bin/X11/wodim: fifo had 192 puts and 1 gets.
/usr/bin/X11/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
BURN-Free was never needed.
cdrecord command:
-----------------------
/usr/bin/X11/wodim -v gracetime=2 dev=2,0,0 speed=16 -dao
driveropts=burnfree -eject -data
/home/ian/large4/ubuntu-7.04-beta-desktop-i386.iso
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
