Package: installation-reports INSTALL REPORT
Debian-installer-version: <Fill in date and from where you got the image> uname -a: Linux zeus 2.6.8-3-386 #1 Wed Dec 6 00:38:53 UTC 2006 i586 GNU/Linux Date: Sat, 17 Mar 2007 15:16:04 +0100 Method: Installed using the Debian GNU/Linux 3.1r5 netinst CD Machine: Old AMD-K6 that serves as a small mailserver Processor: AMD K6-2, 400MHz Memory: 512 MB SDRAM Root Device: IDE Root Size/partition table: zeus:~# fdisk -l /dev/hda Disk /dev/hda: 10.1 GB, 10141286400 bytes 255 heads, 63 sectors/track, 1232 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 1 122 979933+ 83 Linux /dev/hda2 123 184 498015 82 Linux swap / Solaris /dev/hda3 185 215 249007+ 83 Linux /dev/hda4 216 1232 8169052+ 5 Extended /dev/hda5 216 458 1951866 fd Linux raid autodetect /dev/hda6 459 1232 6217123+ fd Linux raid autodetect zeus:~# mount | grep "^/dev/[hda|md?]" /dev/hda1 on / type ext3 (rw,noatime,errors=remount-ro) /dev/hda3 on /tmp type ext3 (rw,nodev,noatime) /dev/md5 on /var type ext3 (rw,nodev,noatime) /dev/md6 on /var/qmail type ext3 (rw,noatime) Output of lspci and lspci -n: zeus:~# lspci 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT82C598 [Apollo MVP3] (rev 04) 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] 0000:00:07.0 ISA bridge: VIA Technologies, Inc. VT82C586/A/B PCI-to-ISA [Apollo VP] (rev 47) 0000:00:07.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 0000:00: 07.3 Host bridge: VIA Technologies, Inc. VT82C586B ACPI (rev 10) 0000:00:14.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10) 0000:01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC AGP (rev 3a) zeus:~# lspci -n 0000:00:00.0 0600: 1106:0598 (rev 04) 0000:00:01.0 0604: 1106:8598 0000:00:07.0 0601: 1106:0586 (rev 47) 0000:00:07.1 0101: 1106:0571 (rev 06) 0000:00:07.3 0600: 1106:3040 (rev 10) 0000:00:14.0 0200: 10ec:8139 (rev 10) 0000:01:00.0 0300: 1002:475a (rev 3a) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Smooth & Easy. Absolutely no problems.
