On Thu Mar 08, 2007 at 14:04:09 +0100, Markus Meier wrote: > Am Donnerstag, 8. März 2007 10:33 schrieb Adam Lackorzynski: > > On Thu Mar 08, 2007 at 00:14:07 +0100, Markus Meier wrote: > > > If minicom is started with LANG=de_DE.UTF-8 and serial port is set > > > wrong (wrong Bps/Par/Bits), it crashes with the following error > > > message: > > > > > > xminicom: ../iconv/loop.c:425: internal_utf8_loop_single: > > > Zusicherung »inptr - bytebuf > (state->__count & 7)« nicht erfüllt. > > > > Can you give me a concrete example of the wrong configuration? I > > can't trigger this assertion (on ia32). > > I booted pfsense (Firewall derivated from FreeBSD) and tried to watch > the boot process via serial console. pfsense wants me to set the serial > port to 9600 8N1, but I firstly forgot this and kept the old setting, > which was 38400 8N1. I think the resultant garbage on the terminal > raised the foregoing error. I also did some further investigation and > tried this on x86 and x86-64, but the error appears on both computers.
It's hard for me to do anything about this since this is an assertion from inside glibc. To start, I probably need to reproduce this... > I also found the following typing error: > When I leave minicom with strg a + x it says "Modem zurüksetzen" but > here a 'c' is missing, as it has to be labeled to "Modem zurücksetzen". Thanks, this one is fixed in upstream. Adam -- Adam [EMAIL PROTECTED] Lackorzynski http://os.inf.tu-dresden.de/~adam/
