reassign 413087 linux-2.6 thanks Hi,
[EMAIL PROTECTED] wrote: > package: bcm43xx-fwcutter (1:005-2) [contrib] > You know that bcm43xx-fwcuttter is just the tool to extract the firmware - it's not the kernel nor the driver. some weeks ago I posted this in an userforum. A lot of reading, but no > answer / solution to the problem . I'd like to use my laptop normally under > welcome in forums. forums suck. | make the wlan run. | > | I run wpa-supplicant with wpa2. | > | First it seems that I could not get any IP-Adress from my AVM-FRITZ | > | router, but then I realized that there was an "attenuation low" | > | problem. | > | Putting the laptop directly beneath my latop -it works. | > | But it works only for a distance of about 1 meter - so it isn't | > | really usable. | > | With that other OS I can do my work at the other end of my flat - | > | more than 12 meters. | > | Any suggestions on how to raise the sensibility of the antenna ? | > | Tried different bcmw5l native driver - no effect. | > Driver problem. Which chip? At least 4318 has definitive issues. Anyway, -> kernel. Regards, Rene -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
