Package: Wodim
Version: 9.1.1
When conducting DVD burns using XCDroast and K3Burner wodim fails to
properly detect the dma settings, and fails to complete the burn with the
error "wodim: OPC Failed // Errno: 5"
Dummy burns show no problems, properly detect dma and predict that there
will be no issues.
When burning at command line with self-compiled cdrtools there are no
problems whatsoever.
A fully up-to-date Etch system --
ide_cd is loaded --
Kernel: 2.6.18-3-k7 #1 SMP i686 GNU/Linux
Failed burns show these messages:
Calling: /usr/lib/xcdroast/bin/xcdrwrap CDRECORDDVD dev= "OLDATAPI:0,0,0"
gracetime=10 fs=16384k driveropts=burnfree -v -useinfo speed=40 -dao -eject
-pad -data "/home/kyle/TMP/track-01.iso" ...
scsidev: 'ATAPI:0,0,0'
devname: 'ATAPI'
scsibus: 0 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
TOC Type: 1 = CD-ROM
communication breaks or freezes immediately after that.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'ASUS '
Identification : 'DRW-1608P '
Revision : '1.40'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011
Profile: 0x002B
Profile: 0x001B
Profile: 0x001A
Profile: 0x0016
Profile: 0x0015
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011 (current)
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009
Profile: 0x0008
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1605632 = 1568 KB
FIFO size : 16777216 = 16384 KB
Track 01: data 4208 MB padsize: 30 KB
Total size: 4833 MB (478:50.21) = 2154766 sectors
Lout start: 4833 MB (478:52/16) = 2154766 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 143730
Speed set to 16620 KB/s
Starting to write CD/DVD at speed 13.0 in real SAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
Performing OPC...
Errno: 5 (Input/output error), send opc scsi sendcmd: no error
CDB: 54 01 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0E 00 00 00 00 15 02 00 00 00 00 00 00 00
00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x15 Qual 0x02 (positioning error detected by read of medium)
Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 175.839s timeout 200s
wodim: OPC failed.
Writing time: 179.826s
Dummy burns show these messages:
Calling: /usr/lib/xcdroast/bin/xcdrwrap CDRECORDDVD dev= "OLDATAPI:0,0,0"
gracetime=10 fs=16384k driveropts=noburnfree -v -useinfo speed=40 -dao
-dummy -eject -pad -data "/home/kyle/TMP/track-01.iso" ...
scsidev: 'ATAPI:0,0,0'
devname: 'ATAPI'
scsibus: 0 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
SCSI buffer size: 64512
TOC Type: 1 = CD-ROM
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
Driveropts: 'noburnfree'
communication breaks or freezes immediately after that.
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'ASUS '
Identification : 'DRW-1608P '
Revision : '1.40'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0011
Profile: 0x002B
Profile: 0x001B
Profile: 0x001A
Profile: 0x0016
Profile: 0x0015
Profile: 0x0014
Profile: 0x0013
Profile: 0x0011 (current)
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009
Profile: 0x0008
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1605632 = 1568 KB
FIFO size : 16777216 = 16384 KB
Track 01: data 4208 MB padsize: 30 KB
Total size: 4833 MB (478:50.21) = 2154766 sectors
Lout start: 4833 MB (478:52/16) = 2154766 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 143730
Speed set to 16620 KB/s
Starting to write CD/DVD at speed 13.0 in dummy SAO mode for single
session.
Waiting for reader process to fill input buffer ...
input buffer ready.
Sending CUE sheet...
Starting new track at sector: 0
Track 01: writing 30 KB of pad data.
Track 01: Total bytes read/written: 4412930048/4412960768 (2154766 sectors).
Writing time: 430.953s
Average write speed 7.4x.
Min drive buffer fill was 49%
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.399s
s: Blk 0 (not valid)
cmd finished after 175.839s timeout 200s
wodim: OPC failed.
Writing time: 179.826s
hdparm returns this:
Model=ASUS DRW-1608P, FwRev=1.40, SerialNo=
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=13395, BuffSize=64kB, MaxMultSect=0
(maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 *udma4 udma3 *udma4
AdvancedPM=no
Drive conforms to: Unspecified: ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4
ATA/ATAPI-5
