Package: installation-reports INSTALL REPORT
Debian-installer-version: 24 Mar 2005, RC3, http://www.debian.org/devel/debian-installer/ uname -a: Linux capital 2.6.8-2-386 #1 Mon Jan 24 03:01:58 EST 2005 i686 GNU/Linux Date: 24 Mar 2005, 4:00 pm CST Method: Installed from netinst cd image using the boot option linux26 from mirrors.kernel.org, not proxied Machine: Dell PowerEdge 400SC Processor: Intel(R) Pentium(R) 4 CPU 2.80GHz (Hyper-threading) Memory: 512 MB Root Device: IDE, /dev/hda Root Size/partition table: Disk /dev/hda: 40.0 GB, 40000000000 bytes 255 heads, 63 sectors/track, 4863 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/hda1 4742 4863 979965 82 Linux swap /dev/hda2 * 1 4741 38082051 83 Linux Partition table entries are not in disk order /dev/hda2 on / type reiserfs (rw,notail) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) tmpfs on /dev/shm type tmpfs (rw) usbfs on /proc/bus/usb type usbfs (rw) Output of lspci and lspci -n: lspci: 0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02) 0000:00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 02) 0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) 0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) 0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) 0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02) 0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) 0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02) 0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) 0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02) 0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02) 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) 0000:02:00.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 0000:02:0c.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02) lspci -n: 0000:00:00.0 0600: 8086:2578 (rev 02) 0000:00:01.0 0604: 8086:2579 (rev 02) 0000:00:1d.0 0c03: 8086:24d2 (rev 02) 0000:00:1d.1 0c03: 8086:24d4 (rev 02) 0000:00:1d.2 0c03: 8086:24d7 (rev 02) 0000:00:1d.3 0c03: 8086:24de (rev 02) 0000:00:1d.7 0c03: 8086:24dd (rev 02) 0000:00:1e.0 0604: 8086:244e (rev c2) 0000:00:1f.0 0601: 8086:24d0 (rev 02) 0000:00:1f.1 0101: 8086:24db (rev 02) 0000:00:1f.2 0101: 8086:24d1 (rev 02) 0000:00:1f.3 0c05: 8086:24d3 (rev 02) 0000:00:1f.5 0401: 8086:24d5 (rev 02) 0000:02:00.0 0300: 1002:4752 (rev 27) 0000:02:0c.0 0200: 8086:100e (rev 02) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: Everything looked very good for this machine, I was pleased that I could easily get the 2.6 kernel and reiserfs. Only two things that I think could use improvement: 1. The mail setup is a bit off putting I think there were five options, and I'm not certain I picked the proper one. Perhaps either more help would be nice. (Maybe I should just spend more time reading the manual first.) 2. Would it be possible to offer the user the choice of branches. For example I could select Stable, Testing, or Unstable. Thank you for the great job, all my hardware was recognized, and I have a working system after about fifteen minutes. (I did a minimal installation.) Install logs and other status info is available in /var/log/debian-installer/. Once you have filled out this report, mail it to [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
