Package: installation-reports
Boot method: Network
Image version: (Downloaded at 20061229)
http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/i386/iso-cd/debian-testing-i386-netinst.iso
Date: Dec 30, 2006
Machine: Home built system, based on an Asus P5B-V motherboard.
Processor: Intel Core Duo 2 E6300
Memory: 1Gb
Partitions: not made.
Output of lspci -nn and lspci -vnn: (note: I made these with Kubuntu 6.10,
using lspci 2.2.1
======================== lspci -nn =============================
00:00.0 0600: 8086:29a0 (rev 02)
00:01.0 0604: 8086:29a1 (rev 02)
00:02.0 0300: 8086:29a2 (rev 02)
00:03.0 0780: 8086:29a4 (rev 02)
00:1a.0 0c03: 8086:2834 (rev 02)
00:1a.1 0c03: 8086:2835 (rev 02)
00:1a.7 0c03: 8086:283a (rev 02)
00:1b.0 0403: 8086:284b (rev 02)
00:1c.0 0604: 8086:283f (rev 02)
00:1c.4 0604: 8086:2847 (rev 02)
00:1d.0 0c03: 8086:2830 (rev 02)
00:1d.1 0c03: 8086:2831 (rev 02)
00:1d.2 0c03: 8086:2832 (rev 02)
00:1d.7 0c03: 8086:2836 (rev 02)
00:1e.0 0604: 8086:244e (rev f2)
00:1f.0 0601: 8086:2810 (rev 02)
00:1f.2 0101: 8086:2820 (rev 02)
00:1f.3 0c05: 8086:283e (rev 02)
00:1f.5 0101: 8086:2825 (rev 02)
02:00.0 0106: 197b:2363 (rev 02)
02:00.1 0101: 197b:2363 (rev 02)
04:03.0 0c00: 1106:3044 (rev c0)
04:04.0 0200: 11ab:4320 (rev 14)
======================== lspci -nn =============================
======================== lspci -vnn =============================
[EMAIL PROTECTED]:/home/geertjan# lspci -vnn
00:00.0 0600: 8086:29a0 (rev 02)
Subsystem: 1043:820b
Flags: bus master, fast devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:01.0 0604: 8086:29a1 (rev 02)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Prefetchable memory behind bridge: 00000000bfd00000-00000000bfd00000
Capabilities: [88] #0d [0000]
Capabilities: [80] Power Management version 3
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0
Enable+
Capabilities: [a0] Express Root Port (Slot+) IRQ 0
00:02.0 0300: 8086:29a2 (rev 02)
Subsystem: 1043:820b
Flags: bus master, fast devsel, latency 0, IRQ 169
Memory at ffa00000 (32-bit, non-prefetchable) [size=1M]
Memory at d0000000 (64-bit, prefetchable) [size=256M]
I/O ports at ec00 [size=8]
Capabilities: [90] Message Signalled Interrupts: 64bit- Queue=0/0
Enable-
Capabilities: [d0] Power Management version 2
00:03.0 0780: 8086:29a4 (rev 02)
Subsystem: 1043:820b
Flags: bus master, fast devsel, latency 0, IRQ 11
Memory at ff9fbc00 (64-bit, non-prefetchable) [size=16]
Capabilities: [50] Power Management version 3
Capabilities: [8c] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
00:1a.0 0c03: 8086:2834 (rev 02)
Subsystem: 1043:81ec
Flags: bus master, medium devsel, latency 0, IRQ 169
I/O ports at d880 [size=32]
00:1a.1 0c03: 8086:2835 (rev 02)
Subsystem: 1043:81ec
Flags: bus master, medium devsel, latency 0, IRQ 177
I/O ports at dc00 [size=32]
00:1a.7 0c03: 8086:283a (rev 02) (prog-if 20)
Subsystem: 1043:81ec
Flags: bus master, medium devsel, latency 0, IRQ 233
Memory at ff9fb800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1b.0 0403: 8086:284b (rev 02)
Subsystem: 1043:821a
Flags: bus master, fast devsel, latency 0, IRQ 58
Memory at ff9f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Capabilities: [60] Message Signalled Interrupts: 64bit+ Queue=0/0
Enable-
Capabilities: [70] Express Unknown type IRQ 0
00:1c.0 0604: 8086:283f (rev 02)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Prefetchable memory behind bridge: 00000000bfe00000-00000000bfe00000
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable+
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1c.4 0604: 8086:2847 (rev 02)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: ff600000-ff6fffff
Capabilities: [40] Express Root Port (Slot+) IRQ 0
Capabilities: [80] Message Signalled Interrupts: 64bit- Queue=0/0
Enable+
Capabilities: [90] #0d [0000]
Capabilities: [a0] Power Management version 2
00:1d.0 0c03: 8086:2830 (rev 02)
Subsystem: 1043:81ec
Flags: bus master, medium devsel, latency 0, IRQ 225
I/O ports at d400 [size=32]
00:1d.1 0c03: 8086:2831 (rev 02)
Subsystem: 1043:81ec
Flags: bus master, medium devsel, latency 0, IRQ 217
I/O ports at d480 [size=32]
00:1d.2 0c03: 8086:2832 (rev 02)
Subsystem: 1043:81ec
Flags: bus master, medium devsel, latency 0, IRQ 233
I/O ports at d800 [size=32]
00:1d.7 0c03: 8086:2836 (rev 02) (prog-if 20)
Subsystem: 1043:81ec
Flags: bus master, medium devsel, latency 0, IRQ 225
Memory at ff9fb400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
00:1e.0 0604: 8086:244e (rev f2) (prog-if 01)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: ff700000-ff7fffff
Prefetchable memory behind bridge: 0000000040000000-0000000040000000
Capabilities: [50] #0d [0000]
00:1f.0 0601: 8086:2810 (rev 02)
Subsystem: 1043:821a
Flags: bus master, medium devsel, latency 0
Capabilities: [e0] Vendor Specific Information
00:1f.2 0101: 8086:2820 (rev 02) (prog-if 8f)
Subsystem: 1043:821a
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 217
I/O ports at e880 [size=8]
I/O ports at e800 [size=4]
I/O ports at e480 [size=8]
I/O ports at e400 [size=4]
I/O ports at e080 [size=16]
I/O ports at e000 [size=16]
Capabilities: [70] Power Management version 3
00:1f.3 0c05: 8086:283e (rev 02)
Subsystem: 1043:821a
Flags: medium devsel, IRQ 15
Memory at 40100000 (32-bit, non-prefetchable) [disabled] [size=256]
I/O ports at 0400 [size=32]
00:1f.5 0101: 8086:2825 (rev 02) (prog-if 85)
Subsystem: 1043:821a
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 217
I/O ports at d080 [size=8]
I/O ports at d000 [size=4]
I/O ports at cc00 [size=8]
I/O ports at c880 [size=4]
I/O ports at c800 [size=16]
I/O ports at c480 [size=16]
Capabilities: [70] Power Management version 3
02:00.0 0106: 197b:2363 (rev 02) (prog-if 01)
Subsystem: 1043:81e4
Flags: bus master, fast devsel, latency 0, IRQ 169
[virtual] Memory at 0000a000 (32-bit, non-prefetchable) [size=8]
[virtual] Memory at 0000a000 (32-bit, prefetchable) [size=8]
Memory at ff6fe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at ff6e0000 [disabled] [size=64K]
Capabilities: [68] Power Management version 2
Capabilities: [50] Express Legacy Endpoint IRQ 1
02:00.1 0101: 197b:2363 (rev 02) (prog-if 85)
Subsystem: 1043:81e4
Flags: bus master, fast devsel, latency 0, IRQ 177
I/O ports at ac00 [size=8]
I/O ports at a880 [size=4]
I/O ports at a800 [size=8]
I/O ports at a480 [size=4]
I/O ports at a400 [size=16]
Capabilities: [68] Power Management version 2
04:03.0 0c00: 1106:3044 (rev c0) (prog-if 10)
Subsystem: 1043:81fe
Flags: bus master, medium devsel, latency 64, IRQ 50
Memory at ff7ff800 (32-bit, non-prefetchable) [size=2K]
I/O ports at bc00 [size=128]
Capabilities: [50] Power Management version 2
04:04.0 0200: 11ab:4320 (rev 14)
Subsystem: 1043:811a
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 217
Memory at ff7f8000 (32-bit, non-prefetchable) [size=16K]
I/O ports at b800 [size=256]
Expansion ROM at 40000000 [disabled] [size=128K]
Capabilities: [48] Power Management version 2
Capabilities: [50] Vital Product Data
[EMAIL PROTECTED]:/home/geertjan#
======================== lspci -vnn =============================
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot: [ OK]
Detect network card: [E]
Configure network: [E]
Detect CD: [OK]
Load installer modules: [OK]
Detect hard drives: [OK]
Partition hard drives: [OK]
Install base system: [OK]
Clock/timezone setup: [ ]
User/password setup: [ ]
Install tasks: [ ]
Install boot loader: [ ]
Overall install: [ ]
Comments/Problems:
This system is a newly built system, on which I tried to install Etch.
Everything
went ok, up until the moment that I needed to select the network card. There
were two selections, one for the correct network card (Marvell Technology
Group Ltd. 88E8001 Gigabit Ethernet Controller) and one for a generic
network selection, something like 'Ethernet or Fast Ethernet'. I tried both,
but
neither of the two worked, Which left me with a system without networking
connectivity.
I also tried the Etch RC1 version, with the same behavior.
First I suspected a hardware malfunction as the led's on the port were also off
,
but networking with kubuntu works without a glitch. I first ran kubuntu as
a live-cd, it starts this way, you get a desktop button with which to install
it.
After rebooting again in the debian minimal system - which was installed from
the netinst CD, I had networking connectivity, and was for instance able to
run dhclient and get network settings configured.
I installed kubuntu on this system, just to make sure that it isn't something
related to a combination of sata / network issues (see bug #347412) but
this installation seems to work.
It looks like the installer someway messes up the network hardware during
detection, after which it isn't functional anymore. A simple reboot doesn't
solve the problem, only using software that also sets this network
configuration makes it working again.
I am testing with this system, so I am happy to retry the install or do any
other
tests to verify/solve this problem.
Regards, Geert-Jan Hut.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
