Package: installation-reports Debian-installer-version: http://people.debian.org/~luther/d-i/images/daily/powerpc/netboot/vmlinux http://people.debian.org/~luther/d-i/images/daily/powerpc/netboot/initrd.gz date: 18-March-2005-01:18
uname -a: Linux Powerbook 2.6.8-powerpc #1 Thu Feb 24 14:15:19 CET 2005 ppc GNU/Linux Date: 2005-03-18 Method: Started with MacOS 9.1, BootX 1.2.2 and 7.6 GB of free space on HD. Used ftp from mirror.switch.ch using home ADSL connection No proxy. Machine: Macintosh G3 Series 266 MHz "Wallstreet", 192 MB RAM, 20 GB Toshiba MK2018 GAS HD, Matsushita UJDA310 CDRW Processor: 266 MHz G3 Memory: 192 MB (original 64 MB + 128 MB module) Root Device: IDE 20 GB Toshiba MK2018 GAS HD. Root Size/partition table: MacOS on partitions 1-9, 2.2 GB root on partition 10, 281 MB swap on partition 11, 5.2 GB home on partition 12. (Sizes chosen by installer, given "Desktop" option.) output of lspci: 0000:00:00.0 Host bridge: Motorola MPC106 [Grackle] (rev 40) 0000:00:0d.0 ff00: Apple Computer Inc. Paddington Mac I/O 0000:00:10.0 ff00: Apple Computer Inc. Paddington Mac I/O 0000:00:11.0 Display controller: ATI Technologies Inc 3D Rage LT Pro (rev dc) 0000:00:13.0 CardBus bridge: Texas Instruments PCI1131 (rev 01) 0000:00:13.1 CardBus bridge: Texas Instruments PCI1131 (rev 01) 0000:01:00.0 USB Controller: OPTi Inc. 82C861 (rev 10) and lspci -n: 0000:00:00.0 0600: 1057:0002 (rev 40) 0000:00:0d.0 ff00: 106b:0017 0000:00:10.0 ff00: 106b:0017 0000:00:11.0 0380: 1002:4c50 (rev dc) 0000:00:13.0 0607: 104c:ac15 (rev 01) 0000:00:13.1 0607: 104c:ac15 (rev 01) 0000:01:00.0 0c03: 1045:c861 (rev 10) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [ ] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [ ] Reboot: [ ] Comments/Problems: Didn't want to install quik, didn't want a boot partition, had some difficulty copying the contents of /boot back to the BootX folder on the MacOS partition. Eventually done by mounting the root partition and a DOS formatted CF card (in the cardbus slot) while running the installer and copying files across. Could then boot using BootX. Very smooth install up to this point. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
