Package: sensors-applet
Version: 1.7.8+dfsg-2
Severity: important
*** Please type your report below this line ***
Hi.
I have Tyan Tiger MP board with w83782d and w83627hf chip both installed.
Each of them repors common list of information and so on.
But sensors-applet does not allow to add sensors from second chip, so it
is not possible to watch FAN speed on CPU in my case. First chip reports
only case fans status.
Here goes "sonsors" output:
w83782d-i2c-0-2d
Adapter: SMBus AMD766 adapter at 80e0
VCore 1: +1.66 V (min = +0.00 V, max = +4.08 V)
VCore 2: +1.94 V (min = +0.00 V, max = +4.08 V)
+3.3V: +1.55 V (min = +2.82 V, max = +3.79 V) ALARM
+5V: +4.76 V (min = +0.00 V, max = +2.58 V) ALARM
+12V: +4.74 V (min = +0.00 V, max = +0.00 V) ALARM
-12V: -2.00 V (min = -14.91 V, max = -14.91 V) ALARM
-5V: +2.74 V (min = -7.71 V, max = -7.71 V) ALARM
V5SB: +4.19 V (min = +0.16 V, max = +0.00 V) ALARM
VBat: +1.10 V (min = +0.00 V, max = +0.00 V) ALARM
fan1: 0 RPM (min = 5273 RPM, div = 8) ALARM
fan2: 0 RPM (min = 2636 RPM, div = 8) ALARM
fan3: 0 RPM (min = -1 RPM, div = 8) ALARM
temp1: +47°C (high = +0°C, hyst = +0°C) sensor = transistor
ALARM
temp2: +45.0°C (high = +80°C, hyst = +75°C) sensor = transistor
temp3: +49.5°C (high = +80°C, hyst = +75°C) sensor = transistor
vid: +1.650 V (VRM Version 9.0)
alarms: Chassis intrusion detection ALARM
beep_enable:
Sound alarm enabled
w83627hf-isa-0c00
Adapter: ISA adapter
VCore 1: +1.65 V (min = +1.44 V, max = +1.86 V)
VCore 2: +1.62 V (min = +1.44 V, max = +1.86 V)
+3.3V: +3.18 V (min = +2.82 V, max = +3.79 V)
+5V: +4.76 V (min = +6.42 V, max = +1.05 V) ALARM
+12V: +9.55 V (min = +1.28 V, max = +11.55 V)
-12V: -12.03 V (min = -13.92 V, max = +0.39 V)
-5V: -0.17 V (min = +2.44 V, max = +1.79 V) ALARM
V5SB: +5.35 V (min = +0.30 V, max = +3.95 V) ALARM
VBat: +0.18 V (min = +1.65 V, max = +4.08 V) ALARM
fan1: 969 RPM (min = 1004 RPM, div = 8) ALARM
fan2: 1010 RPM (min = 852 RPM, div = 8)
fan3: 0 RPM (min = 795 RPM, div = 8) ALARM
temp1: +78°C (high = -83°C, hyst = -11°C) sensor = thermistor
ALARM
temp2: +78.5°C (high = +80°C, hyst = +75°C) sensor = thermistor
ALARM
temp3: +77.5°C (high = +80°C, hyst = +75°C) sensor = thermistor
vid: +1.650 V (VRM Version 9.0)
alarms:
beep_enable:
Sound alarm enabled
-- System Information:
Debian Release: testing/unstable
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17-2-k7
Locale: LANG=be_BY.UTF-8, LC_CTYPE=be_BY.UTF-8 (charmap=UTF-8)
Versions of packages sensors-applet depends on:
ii libc6 2.3.6.ds1-7 GNU C Library: Shared
libraries
ii libcairo2 1.2.4-4 The Cairo 2D vector graphics
libra
ii libgconf2-4 2.16.0-2 GNOME configuration database
syste
ii libglib2.0-0 2.12.4-1 The GLib library of C
routines
ii libgnome2-0 2.16.0-2 The GNOME 2 library - runtime
file
ii libgnomeui-0 2.14.1-2 The GNOME 2 libraries (User
Interf
ii libgtk2.0-0 2.8.20-3 The GTK+ graphical user
interface
ii libnotify1 0.4.2-1+b1 sends desktop notifications
to a n
ii libpanel-applet2-0 2.14.3-2 library for GNOME 2 panel
applets
ii libsensors3 1:2.10.1-2 library to read
temperature/voltag
sensors-applet recommends no packages.
-- no debconf information
---
Эффективное, быстрое и живое изучение английского языка в Школе мистера
Бола http://mrball.nsys.by . Занятия с 01.12.06. Самые современные патенты,
методики и know-how. Запись на интервью: тел. 284-7949, [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
