Package: installation-reports INSTALL REPORT
Debian-installer-version: Thur 17 Mar, ftp.no.debian.org
uname -a: Linux hunnicut 2.4.18-386 #2 Sun Apr 14 10:38:08 EST 2002 i586 unknown
Date: Fri 18 Mar, 17:00-ish CET
Method:
Grabbed netboot.tar.gz, created etherboot-image and -floppy with serial
console.
Etherboot, TFTP and DHCP.
Installed Woody from ftp.no.debian.org
Machine:
Installation was carried out on my desktop (AMD Athlon XP 1800+, 256MB
RAM),
after the initial try on a Intel Pentium 100MHz, 32MB RAM failed due to
lack of
memory. Putting the disk back into the Pentium-machine worked nicely.
Processor: Pentium 100MHz / Athlon XP 1800+ (1500MHz)
Memory: 32MB / 256MB
Root Device: IDE, Seagate ST310014ACE
Root Size/partition table:
Disk /dev/hda: 255 heads, 63 sectors, 1245 cylinders
Units = cylinders of 16065 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 34 273073+ 83 Linux # /boot
/dev/hda2 35 1245 9727357+ 5 Extended
/dev/hda5 35 472 3518203+ 83 Linux
/dev/hda6 473 692 1767118+ 83 Linux
/dev/hda7 693 759 538146 82 Linux swap
/dev/hda8 760 797 305203+ 83 Linux
/dev/hda9 798 1245 3598528+ 83 Linux
mount:
/dev/hda1 / ext3 defaults 0 1
/dev/hda9 /home ext3 nodev,nosuid,noexec 0
2
/dev/hda8 /tmp ext3 nodev,nosuid 0 2
/dev/hda5 /usr ext3 nodev 0 2
/dev/hda6 /var ext3 nodev 0 2
/dev/hda7 none swap sw 0 0
Output of lspci and lspci -n:
00:00.0 Host bridge: VIA Technologies, Inc. VT82C576 3V [Apollo Master]
(rev 02)
00:01.0 IDE interface: VIA Technologies, Inc. VT82C416MV (rev 04)
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139
(rev 10)
00:0b.0 Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev
08)
00:00.0 Class 0600: 1106:0576 (rev 02)
00:01.0 Class 0101: 1106:1571 (rev 04)
00:0a.0 Class 0200: 10ec:8139 (rev 10)
00:0b.0 Class 0200: 8086:1229 (rev 08)
Base System Installation Checklist:
[O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it
Initial boot worked: [O]
Configure network HW: [O]
Config network: [O]
Detect CD: [ ]
Load installer modules: [O]
Detect hard drives: [O]
Partition hard drives: [O]
Create file systems: [O]
Mount partitions: [O]
Install base system: [O]
Install boot loader: [O]
Reboot: [O]
Comments/Problems:
My only problem was that the d-i rc2-netboot-image in Sarge on ftp.no.debian.org
was broken. http://www.debian.org/devel/debian-installer/News/2005/20050301
explained that.
Using the d-i-netboot from Sid worked better, and I didn't have to compile a new
kernel for it, again. ;-)
signature.asc
Description: Digital signature
