Package: installation-reports Boot method: Netinst CD Image version: 20061025 daily Date: Thu, 26 Oct 2006 21:04:11 -0600
Machine: HP rx2600 Processor: Itanium II (ia64) Memory: 12G Partitions: debian:~# df -Tl Filesystem Type 1K-blocks Used Available Use% Mounted on /dev/sda2 ext3 68496816 824260 64193116 2% / udev tmpfs 10240 128 10112 2% /dev devshm tmpfs 6250224 0 6250224 0% /dev/shm Output of lspci and lspci -n: debian:~# lspci 00:01.0 USB Controller: NEC Corporation USB (rev 41) 00:01.1 USB Controller: NEC Corporation USB (rev 41) 00:01.2 USB Controller: NEC Corporation USB 2.0 (rev 02) 00:02.0 IDE interface: Silicon Image, Inc. SiI 0649 Ultra ATA/100 PCI to ATA Host Controller (rev 02) 00:03.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 0d) 20:01.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) 20:01.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) 20:02.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5701 Gigabit Ethernet (rev 15) e0:01.0 Communication controller: Hewlett-Packard Company Auxiliary Diva Serial Port (rev 01) e0:01.1 Serial controller: Hewlett-Packard Company Diva Serial [GSP] Multiport UART (rev 03) e0:02.0 VGA compatible controller: ATI Technologies Inc Radeon RV100 QY [Radeon 7000/VE] debian:~# lspci -n 00:01.0 0c03: 1033:0035 (rev 41) 00:01.1 0c03: 1033:0035 (rev 41) 00:01.2 0c03: 1033:00e0 (rev 02) 00:02.0 0101: 1095:0649 (rev 02) 00:03.0 0200: 8086:1229 (rev 0d) 20:01.0 0100: 1000:0030 (rev 07) 20:01.1 0100: 1000:0030 (rev 07) 20:02.0 0200: 14e4:1645 (rev 15) e0:01.0 0780: 103c:1290 (rev 01) e0:01.1 0700: 103c:1048 (rev 03) e0:02.0 0300: 1002:5159 Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems: [O] Mount partitions: [O] Install base system: [O] Install boot loader: [O] Reboot: [O] Comments/Problems: worked great -- dann frazier | HP Open Source and Linux Organization -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
