Package: wodim Version: 5:1.0~pre4-1.1 Severity: important
I've not been able to burn cd/dvd lately, this is the error I get. I tested the subversion sources with same results. -- Juan wodim -vvv dev=/dev/hdc guia.iso This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any way, don't refer to it as "cdrecord". Send problem reports to [EMAIL PROTECTED], don't bother Joerg Schilling with any problems caused by this application. Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling wodim: No write mode specified. wodim: Asuming -tao mode. wodim: Future versions of wodim may have different drive dependent defaults. TOC Type: 1 = CD-ROM scsidev: '/dev/hdc' devname: '/dev/hdc' scsibus: -2 target: -2 lun: -2 Warning: This version of libscg has not been configured via the standard autoconfiguration method of the Schily makefile system. There is a high risk that the code is not configured correctly and for this reason will not behave as expected. Linux sg driver version: 3.5.27 wodim: Warning: using inofficial version of libscg (debburn project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). Using libscg transport code version 'cdrkit-team-scsi-linux-sg.c-1.86' wodim: Warning: using inofficial libscg transport code version (cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-linux-sg.c 1.86 05/11/22 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'PHILIPS ' Identifikation : 'PBDV1640P ' Revision : 'B3.0' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0000 Profile: 0x002B Profile: 0x001B Profile: 0x001A Profile: 0x0014 Profile: 0x0011 Profile: 0x0010 Profile: 0x000A Profile: 0x0009 Profile: 0x0008 Drive current speed: 40 Drive default speed: 40 Drive max speed : 40 Selected speed : 40 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96R RAW/R16 RAW/R96R FIFO size : 4194304 = 4096 KB Track 01: data 701 MB track: 1 start: 0 pregap: 150 Total size: 805 MB (79:48.46) = 359135 sectors Lout start: 805 MB (79:50/35) = 359135 sectors 41 00 00 14 00 00 00 00 41 01 00 10 00 00 00 00 41 01 01 10 00 00 02 00 41 AA 01 14 00 4F 32 23 Track 1 start 0 Track 2 start 359135 41 00 A0 00 00 00 00 01 00 00 00 00 41 00 A1 00 00 00 00 01 00 00 00 00 41 00 A2 00 00 00 00 79 50 35 00 00 41 00 01 00 00 00 00 00 02 00 00 00 wodim: Success. test unit ready: scsi sendcmd: no error CDB: 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 02 00 00 00 00 12 00 00 00 00 3A 00 00 00 Sense Key: 0x2 Not Ready, Segment 0 Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.001s timeout 40s wodim: No disk / Wrong disk! -- System Information: Debian Release: 3.1 APT prefers unstable APT policy: (500, 'unstable'), (500, 'stable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18 Locale: LANG=es_ES, [EMAIL PROTECTED] (charmap=ISO-8859-15) (ignored: LC_ALL set to [EMAIL PROTECTED]) Versions of packages wodim depends on: ii libc6 2.3.6.ds1-4 GNU C Library: Shared libraries ii libcap1 1:1.10-14 support for getting/setting POSIX. Versions of packages wodim recommends: ii mkisofs 5:1.0~pre4-1.1 Creates ISO-9660 CD-ROM filesystem -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
