Package: libgphoto-2
Severity: important

*** Please type your report below this line ***
My camera Fuji Finepix F30 works in USB PTP mode. While I can access 
the photos (via digikam) on the camera as root I can not as normal 
user, allthough I am a member of group camera. 

I am using udev and kernel 2.6.16-2-686.

I think this is a quite severe problem because most new cameras are 
only suported in PTP mode. 

I attached the output of lsusb -v 

Hendrik Naumann

-- System Information:
Debian Release: testing/unstable
  APT prefers testing
  APT policy: (500, 'testing'), (20, 'unstable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.16-2-686
Locale: [EMAIL PROTECTED], [EMAIL PROTECTED] (charmap=ISO-8859-15) 
(ignored: LC_ALL set to [EMAIL PROTECTED])

---------
lsusb shows

Bus 001 Device 003: ID 04cb:019b Fuji Photo Film Co., Ltd
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x04cb Fuji Photo Film Co., Ltd
  idProduct          0x019b
  bcdDevice            1.00
  iManufacturer           0
  iProduct                2 USB PTP Camera
  iSerial                 3 592D313130300605277B43303011EA
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xc0
      Self Powered
    MaxPower               50mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass         6 Imaging
      bInterfaceSubClass      1 Still Image Capture
      bInterfaceProtocol      1 Picture Transfer Protocol (PIMA 15470)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0020  1x 32 bytes
        bInterval              11
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0001
  Self Powered



-- 
PGP ID 65C92061

Attachment: pgptPSoV4u4py.pgp
Description: PGP signature

Reply via email to