On Sun, Oct 08 2006, at 00:08 +0200, Wolfgang Pfeiffer wrote:
> __________________________
> $ alsamixer
>
> alsamixer: function snd_ctl_open failed for default: No such device
> ______________________________________
It seems I just fixed this by removing a few files:
mv ~/.asoundrc ~/.asoundrc.061008
mv /home/shorty/.asoundrc.asoundconf /home/shorty/.asoundrc.asoundconf.061008
And I'm not sure how the files above got installed at all ...
And alsamixer works again, now even with a PCM slider .. I think I
didn't have that one before ...
~/.asoundrc.asoundconf.061008:
__________________________
# ALSA library configuration file managed by asoundconf(1).
#
# MANUAL CHANGES TO THIS FILE WILL BE OVERWRITTEN!
#
# Manual changes to the ALSA library configuration should be implemented
# by editing the ~/.asoundrc file, not by editing this file.
!defaults.pcm.card default:0
defaults.ctl.card default:0
defaults.pcm.device 0
defaults.pcm.subdevice -1
___________________________
~/.asoundrc.061008:
_________________________________
# ALSA library configuration file
# Include settings that are under the control of asoundconf(1).
# (To disable these settings, comment out this line.)
</home/shorty/.asoundrc.asoundconf>
_________________________________
BTW:
$ cat /proc/cpuinfo
processor : 0
cpu : 7447A, altivec supported
clock : 833.333000MHz
revision : 0.5 (pvr 8003 0105)
bogomips : 16.57
timebase : 8320000
platform : PowerMac
machine : PowerBook5,8
motherboard : PowerBook5,8 MacRISC3 Power Macintosh
detected as : 287 (PowerBook G4 15")
pmac flags : 00000019
L2 cache : 512K unified
pmac-generation : NewWorld
$ cat /proc/asound/cards
0 [SoundByLayout ]: AppleOnbdAudio - SoundByLayout
SoundByLayout
I think I'll stop this here now and go with the rest to the powerpc
mailing-list. Perhaps. :)
Would you agree?
Thanks a lot ...
Best Regards
Wolfgang
--
Wolfgang Pfeiffer: /ICQ: 286585973/ + + + /AIM: crashinglinux/
http://profiles.yahoo.com/wolfgangpfeiffer
Key ID: E3037113
http://keyserver.mine.nu/pks/lookup?search=0xE3037113&fingerprint=on
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
