Package: installation-reports Boot method: CD Image version: Debian Etch Testing dated October 3, 2006 Date: October 6, 2006
Machine: IBM JS20 blade Processor: PPC 970FX, 2.2 GHz Memory: 1.5 GB Partitions: hard drive not detected Output of lspci and lspci -n: 00:00.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 00:03.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) 00:04.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) 00:1f.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 12) 01:01.0 Network controller: MYRICOM Inc. Myrinet 2000 Scalable Cluster Interconnect (rev 04) 11:01.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704S Gigabit Ethernet (rev 03) 11:01.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704S Gigabit Ethernet (rev 03) 21:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 21:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) 00:00.0 0604: 1022:7450 (rev 12) 00:03.0 0604: 1022:7460 (rev 07) 00:04.1 0101: 1022:7469 (rev 03) 00:1f.0 0604: 1022:7450 (rev 12) 01:01.0 0280: 14c1:8043 (rev 04) 11:01.0 0200: 14e4:16a8 (rev 03) 11:01.1 0200: 14e4:16a8 (rev 03) 21:00.0 0c03: 1022:7464 (rev 0b) 21:00.1 0c03: 1022:7464 (rev 0b) Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot worked: [O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [E] Partition hard drives: [ ] Create file systems: [ ] Mount partitions: [ ] Install base system: [ ] Install boot loader: [ ] Reboot: [ ] Comments/Problems: The on-board hard drive (40 GB Fujitsu MHT2040AS, 2.5", parallel ATA) is not detected. lspci shows the driver as an AMD 8111, but neither the kernel nor /lib/modules seem to have the amd74xx driver. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
