Hello, I'm having the same problem with the input/output error
I used cdrecord and this worked, but now wodim does not work unfortunately Attached are two logs of K3b. kind regards, Tom,
System ----------------------- K3b Version: 0.12.17 KDE Version: 3.5.4 QT Version: 3.3.6 Kernel: 2.6.17.13 Devices ----------------------- HL-DT-ST DVDRAM GMA-4082N HA01 (/dev/scd0, /dev/sg1) at /media/cdrom [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-R Dual Layer Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite] Used versions ----------------------- cdrecord: 2.1.1a03 cdrecord ----------------------- This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any way, don't refer to it as "cdrecord". Send problem reports to [EMAIL PROTECTED], don't bother Joerg Schilling with any problems caused by this application. Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling scsidev: '0,1,0' scsibus: 0 target: 1 lun: 0 Linux sg driver version: 3.5.33 /usr/bin/X11/wodim: Warning: using inofficial version of libscg (debburn project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). /usr/bin/X11/wodim: Warning: using inofficial libscg transport code version (cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-linux-sg.c 1.86 05/11/22 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 TOC Type: 3 = CD-ROM XA mode 2 Warning: This version of libscg has not been configured via the standard autoconfiguration method of the Schily makefile system. There is a high risk that the code is not configured correctly and for this reason will not behave as expected. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVDRAM GMA-4082N' Revision : 'HA01' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 Profile: 0x0012 Profile: 0x0011 Profile: 0x0015 Profile: 0x0014 Profile: 0x0013 Profile: 0x001A Profile: 0x001B Profile: 0x002B Profile: 0x0010 Profile: 0x0009 (current) Profile: 0x000A Profile: 0x0008 Profile: 0x0002 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1053696 = 1029 KB Drive DMA Speed: 13667 kB/s 77x CD 9x DVD FIFO size : 4194304 = 4096 KB Track 01: data 35 MB Total size: 41 MB (04:05.69) = 18427 sectors Lout start: 41 MB (04:07/52) = 18427 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11607 (97:27/18) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 18 Manufacturer: Plasmon Data systems Ltd. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 341422 Speed set to 4234 KB/s Starting to write CD/DVD at speed 24.0 in dummy TAO mode for multi session. Last chance to quit, starting dummy write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is ON. Starting new track at sector: 0 Track 01: 0 of 35 MB written. Track 01: 1 of 35 MB written (fifo 100%) [buf 99%] 1.8x. Track 01: 2 of 35 MB written (fifo 100%) [buf 96%] 10.3x. Track 01: 3 of 35 MB written (fifo 100%) [buf 99%] 10.7x. Track 01: 4 of 35 MB written (fifo 100%) [buf 99%] 10.4x. Track 01: 5 of 35 MB written (fifo 100%) [buf 100%] 10.7x. /usr/bin/X11/wodim: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 0B DE 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 30 02 80 21 02 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x21 Qual 0x02 (invalid address for write) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.016s timeout 40s /usr/bin/X11/wodim: The current problem looks like a buffer underrun. /usr/bin/X11/wodim: It looks like 'driveropts=burnfree' does not work for this drive. /usr/bin/X11/wodim: Please report. /usr/bin/X11/wodim: Make sure that you are root, enable DMA and check your HW/OS set up. write track data: error after 6221824 bytes Writing time: 15.198s Average write speed 16.6x. Min drive buffer fill was 96% Fixating... WARNING: Some drives don't like fixation in dummy mode. Fixating time: 27.417s cdrecord command: ----------------------- /usr/bin/X11/wodim -v gracetime=2 dev=0,1,0 speed=24 -tao -dummy driveropts=burnfree -eject -multi -xa /home/majortom/k3b_image.iso mkisofs ----------------------- I: -input-charset not specified, using ISO-8859-15 (detected in locale settings) 2.77% done, estimate finish Mon Oct 2 19:36:33 2006 5.47% done, estimate finish Mon Oct 2 19:36:33 2006 8.16% done, estimate finish Mon Oct 2 19:36:33 2006 10.94% done, estimate finish Mon Oct 2 19:36:33 2006 13.63% done, estimate finish Mon Oct 2 19:36:33 2006 16.30% done, estimate finish Mon Oct 2 19:36:33 2006 19.08% done, estimate finish Mon Oct 2 19:36:33 2006 21.77% done, estimate finish Mon Oct 2 19:36:33 2006 24.46% done, estimate finish Mon Oct 2 19:36:33 2006 27.19% done, estimate finish Mon Oct 2 19:36:33 2006 29.88% done, estimate finish Mon Oct 2 19:36:33 2006 32.57% done, estimate finish Mon Oct 2 19:36:33 2006 35.35% done, estimate finish Mon Oct 2 19:36:33 2006 38.02% done, estimate finish Mon Oct 2 19:36:33 2006 40.72% done, estimate finish Mon Oct 2 19:36:33 2006 43.50% done, estimate finish Mon Oct 2 19:36:33 2006 46.19% done, estimate finish Mon Oct 2 19:36:33 2006 48.88% done, estimate finish Mon Oct 2 19:36:33 2006 51.57% done, estimate finish Mon Oct 2 19:36:33 2006 54.34% done, estimate finish Mon Oct 2 19:36:33 2006 57.03% done, estimate finish Mon Oct 2 19:36:33 2006 59.72% done, estimate finish Mon Oct 2 19:36:33 2006 62.48% done, estimate finish Mon Oct 2 19:36:33 2006 65.17% done, estimate finish Mon Oct 2 19:36:33 2006 67.86% done, estimate finish Mon Oct 2 19:36:33 2006 70.56% done, estimate finish Mon Oct 2 19:36:33 2006 73.34% done, estimate finish Mon Oct 2 19:36:33 2006 76.03% done, estimate finish Mon Oct 2 19:36:33 2006 78.73% done, estimate finish Mon Oct 2 19:36:33 2006 81.42% done, estimate finish Mon Oct 2 19:36:33 2006 84.20% done, estimate finish Mon Oct 2 19:36:33 2006 86.89% done, estimate finish Mon Oct 2 19:36:33 2006 89.61% done, estimate finish Mon Oct 2 19:36:33 2006 92.30% done, estimate finish Mon Oct 2 19:36:33 2006 95.00% done, estimate finish Mon Oct 2 19:36:33 2006 97.77% done, estimate finish Mon Oct 2 19:36:33 2006 Total translation table size: 0 Total rockridge attributes bytes: 983 Total directory bytes: 0 Path table size(bytes): 10 Max brk space used 0 18425 extents written (35 MB) mkisofs command: ----------------------- /usr/bin/X11/mkisofs -gui -graft-points -volid Vikings -volset -appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-majortom/k3bZqq81b.tmp -rational-rock -hide-list /tmp/kde-majortom/k3bo1TzWa.tmp -joliet -joliet-long -hide-joliet-list /tmp/kde-majortom/k3b0hOg1b.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-majortom/k3b3AQWdb.tmp
System ----------------------- K3b Version: 0.12.17 KDE Version: 3.5.4 QT Version: 3.3.6 Kernel: 2.6.17.13 Devices ----------------------- HL-DT-ST DVDRAM GMA-4082N HA01 (/dev/scd0, /dev/sg1) at /media/cdrom [CD-R; CD-RW; CD-ROM; DVD-ROM; DVD-RAM; DVD-R; DVD-RW; DVD-R DL; DVD+R; DVD+RW; DVD+R DL] [DVD-ROM; DVD-R Sequential; DVD-R Dual Layer Sequential; DVD-RAM; DVD-RW Restricted Overwrite; DVD-RW Sequential; DVD+RW; DVD+R; DVD+R Double Layer; CD-ROM; CD-R; CD-RW] [SAO; TAO; RAW; SAO/R96P; SAO/R96R; RAW/R16; RAW/R96P; RAW/R96R; Restricted Overwrite] Used versions ----------------------- cdrecord: 2.1.1a03 cdrecord ----------------------- This is wodim, not cdrecord. Don't expect it to behave like cdrecord in any way, don't refer to it as "cdrecord". Send problem reports to [EMAIL PROTECTED], don't bother Joerg Schilling with any problems caused by this application. Copyright (C) 2006 cdrkit maintainers, (C) 1994-2006 Joerg Schilling scsidev: '0,1,0' scsibus: 0 target: 1 lun: 0 Linux sg driver version: 3.5.33 /usr/bin/X11/wodim: Warning: using inofficial version of libscg (debburn project-0.8ubuntu1+debburn1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). /usr/bin/X11/wodim: Warning: using inofficial libscg transport code version (cdrkit-team-scsi-linux-sg.c-1.86 '@(#)scsi-linux-sg.c 1.86 05/11/22 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 TOC Type: 0 = CD-DA Warning: This version of libscg has not been configured via the standard autoconfiguration method of the Schily makefile system. There is a high risk that the code is not configured correctly and for this reason will not behave as expected. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 5 Response Format: 2 Capabilities : Vendor_info : 'HL-DT-ST' Identifikation : 'DVDRAM GMA-4082N' Revision : 'HA01' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x0009 Profile: 0x0012 Profile: 0x0011 Profile: 0x0015 Profile: 0x0014 Profile: 0x0013 Profile: 0x001A Profile: 0x001B Profile: 0x002B Profile: 0x0010 Profile: 0x0009 (current) Profile: 0x000A Profile: 0x0008 Profile: 0x0002 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1053696 = 1029 KB Drive DMA Speed: 13524 kB/s 76x CD 9x DVD FIFO size : 4194304 = 4096 KB Track 01: audio 66 MB (06:32.78) no preemp Track 02: audio 37 MB (03:40.50) no preemp Track 03: audio 41 MB (04:07.17) no preemp Track 04: audio 35 MB (03:29.45) no preemp Track 05: audio 59 MB (05:51.66) no preemp Track 06: audio 35 MB (03:31.90) no preemp Track 07: audio 26 MB (02:36.56) no preemp Total size: 301 MB (29:50.05) = 134254 sectors Lout start: 301 MB (29:52/04) = 134254 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -11607 (97:27/18) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 18 Manufacturer: Plasmon Data systems Ltd. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 225595 Speed set to 4234 KB/s Starting to write CD/DVD at speed 24.0 in dummy SAO mode for single session. Last chance to quit, starting dummy write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is OFF. Turning BURN-Free on Sending CUE sheet... /usr/bin/X11/wodim: WARNING: Drive returns wrong startsec (0) using -150 /usr/bin/X11/wodim: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 FF FF FF 6A 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 80 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63504 cmd finished after 1.932s timeout 200s /usr/bin/X11/wodim: Input/output error. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1B 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 10 2A 00 00 80 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63504 cmd finished after 0.015s timeout 200s /usr/bin/X11/wodim: A write error occured. /usr/bin/X11/wodim: Please properly read the error message above. Writing pregap for track 1 at -150 write track pad data: error after 0 bytes BFree: 1029 K BSize: 1029 K Starting new track at sector: 0 Track 01: 0 of 66 MB written. write track data: error after 0 bytes Writing time: 34.354s Average write speed 52.2x. Fixating... WARNING: Some drives don't like fixation in dummy mode. Fixating time: 0.004s cdrecord command: ----------------------- /usr/bin/X11/wodim -v gracetime=2 dev=0,1,0 speed=24 -dao -dummy driveropts=burnfree -eject -useinfo -audio -shorttrack /home/majortom/k3b_audio_3_01.wav /home/majortom/k3b_audio_3_02.wav /home/majortom/k3b_audio_3_03.wav /home/majortom/k3b_audio_3_04.wav /home/majortom/k3b_audio_3_05.wav /home/majortom/k3b_audio_3_06.wav /home/majortom/k3b_audio_3_07.wav
