On Wed, 2006-09-20 at 15:44 +0200, Vincent Zweije wrote: > Package: xserver-xorg-video-via > Version: 1:0.1.33.2-3 > Severity: minor > > When starting the X server, the kernel spits out the following message: > > Sep 20 10:02:59 arrow kernel: [drm] Initialized drm 1.0.1 20051102 > Sep 20 10:02:59 arrow kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI > 16 (level, low) -> IRQ 201 > Sep 20 10:02:59 arrow kernel: [drm] Initialized via 2.7.4 20051116 on > minor 0 > Sep 20 10:02:59 arrow kernel: agpgart: Found an AGP 3.0 compliant device > at 0000:00:00.0. > Sep 20 10:02:59 arrow kernel: agpgart: Xorg tried to set rate=x12. > Setting to AGP3 x8 mode. > Sep 20 10:02:59 arrow kernel: agpgart: Putting AGP V3 device at > 0000:00:00.0 into 8x mode > Sep 20 10:02:59 arrow kernel: agpgart: Putting AGP V3 device at > 0000:01:00.0 into 8x mode > Sep 20 10:03:00 arrow kernel: irq 201: nobody cared (try booting with the > "irqpoll" option) > Sep 20 10:03:00 arrow kernel: [<b012f12f>] __report_bad_irq+0x2b/0x69 > Sep 20 10:03:00 arrow kernel: [<b012f2e3>] note_interrupt+0x176/0x1a7 > Sep 20 10:03:00 arrow kernel: [<b012ed4b>] handle_IRQ_event+0x20/0x4c > Sep 20 10:03:00 arrow kernel: [<b012eddc>] __do_IRQ+0x65/0x91 > Sep 20 10:03:00 arrow kernel: [<b0104a1b>] do_IRQ+0x1d/0x2a > Sep 20 10:03:00 arrow kernel: [<b010335a>] common_interrupt+0x1a/0x20 > Sep 20 10:03:00 arrow kernel: [<b01019b1>] default_idle+0x2b/0x53 > Sep 20 10:03:00 arrow kernel: [<b0101a18>] cpu_idle+0x3f/0x57 > Sep 20 10:03:00 arrow kernel: [<b02e842d>] start_kernel+0x291/0x293 > Sep 20 10:03:00 arrow kernel: handlers: > Sep 20 10:03:00 arrow kernel: [<ccbeb3b7>] > (via_driver_irq_handler+0x0/0x148 [via]) > Sep 20 10:03:00 arrow kernel: Disabling IRQ #201
This is more likely a bug in the via kernel module than the X driver, so you should probably reassign this bug to your kernel package. -- Earthling Michel Dänzer | http://tungstengraphics.com Libre software enthusiast | Debian, X and DRI developer
