Package: linux-image-2.6.17.11-kanotix-2
Version: 1
Severity: important
Kernel 2.6.17.11-kanotix-2 crashes during boot when attempting to
configure wireless LAN interface (wlan0) configured with ndiswrapper
if the PCICIA wireless card is in the slot during bootup.
Note: the following services were disabled by me (maybe they really
shouldn't?):
-----8<--------8<--------8<--------8<--------8<--------8<--------8<--------8<---
update-rc.d portmap disable
update-rc.d zope2.8 disable
update-rc.d zope2.9 disable
update-rc.d rpc disable
update-rc.d hotplug enable
update-rc.d nfs-common disable
update-rc.d nfs-kernel-server disable
update-rc.d splashy-init disable
-----8<--------8<--------8<--------8<--------8<--------8<--------8<--------8<---
Sample output (typed from screen output during bootup):
-----8<--------8<--------8<--------8<--------8<--------8<--------8<--------8<---
BUG: unable to handle kernel NULL pointer dereference at virtual address
00000040
printing eip:
c019f4a9
*pde = 00000000
Oops: 0000 [#1]
PREEMPT SMP
Modules linked in: nsc_ircc parport_pc parport via_rhine mii snd_via82xx_modem
snd_via82xx gameport snd_ac97_codec snd_ac97_bus snd_pcm_oss snd_mixer_oss
snd_pcm snd_page_alloc snd_mpu401_uart snd_seq_dummy snd_seq_oss snd_seq_midi
snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device snd soundcore
i2c_viapro i2c_core shpchp pci_hotplug via_agp agpgart ehci_hcd uhci_hcd
ath_pci ath_rate_sample wlan ath_hal via_ircc irda crc_ccitt eth1394 tsdev
yenta_socket rsrc_nonstatic pcmcia_core ohci1394 ieee1394 ndiswrapper usbcore
psmouse pcspkr fuse capability commoncap cpufreq_performance cpufreq_powersave
powernow_k7 freq_table processor evdev
CPI: 0
EIP: 0060:[<c019f4a9>] Tainted: P VLI
EFLAGS: 00010202 (2.6.17.11-kanotix-2 #1)
EIP is at remove_proc_entry+0x39/0x200
eax: 00000008 ebx: 00000008 ecx: 00000001 edx: 00000000
esi: de6c3c00 edi: e0d30c7b ebp: 00000002 esp: dde35e5c
ds: 007b es: 007b ss: 0068
Process ifrename (pid: 3279,threadinfo=dde34000 task=dfc07580)
Stack: 0000000a e0d30c78 00000008 de6c3c00 de6c4004 00000004 e0d241db e0d30c78
00000008 de6c3c00 de6c3800 e0d28a76 de6c3c00 e0d3ab1c de6c3800 0000000a
c0132081 e0d3ab1c 0000000a de6c3800 de6c3800 00000000 01a66a1f c033fc05
Call Trace:
<e9d241db> wrap_procfs_remove_ndis_device+0x1b/0xx70 [ndiswrapper]
<e0d28a76> notifier_event+0x26/0x50 [ndiswrapper]
<c0132081> notifier_call_chain+0x21/0x40
<c033fc05> dev_change_name+0x135/0x190
<c033fd7d> dev_ifsioc+0x11d/0x300
<c0340436> dev_ioctl+0x2a6/0x380
<c017bd32> vfs_ioctl+0x52/0x2c0
<c017bbfd> sys_ioctl+0x5d/0x70
<c01030b7> syscall_call+0x7/0xb
Code: 20 89 44 24 04 85 db 0f 84 74 01 00 00 8b 7c 24 04 31 c0 83 c9 ff f2 ae
f7 d1 49 b8 e0 93 42 c0 89 cd e8 7b fb 1f 00 8b 44 24 20 <8b> 48 38 8d 78 38 85
c9 0f 84 11 01 00 00 8b 74 24 04 b8 00 e0
EIP: [<c019f4a9>] remove_proc_entry+0x39/0x200 SS:ESP 0068:dde35e5c
<6>note: ifrename[3279] exited with preempt_count 1
/etc/rcS.d/S40ifrename: line 10: 3279 Segmentation fault $IFRENAME -d -p
-----8<--------8<--------8<--------8<--------8<--------8<--------8<--------8<---
After ejecting the PCMCIA card (D-Link AirPlus XtremeG DWL-G650 Wireless
Cardbus Adapter, hardware revision B2):
-----8<--------8<--------8<--------8<--------8<--------8<--------8<--------8<---
pccard: card ejected from slot 0
ndiswrapper (miniport_reset:62): wlan is being reset
ndiswrapper (miniport_reset:62): wlan is being reset
ndiswrapper (miniport_reset:62): wlan is being reset
-----8<--------8<--------8<--------8<--------8<--------8<--------8<--------8<---
(Last message repeats at infinitum AFAIK.)
-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (200, 'testing')
Architecture: i386 (i686)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.17.11-kanotix-2
Locale: LANG=C, LC_CTYPE=en_US.ISO-8859-15 (charmap=ISO-8859-15)
Versions of packages linux-image-2.6.17.11-kanotix-2 depends on:
ii coreutils [fileutils] 5.97-5 The GNU core utilities
ii debconf [debconf-2.0] 1.5.4 Debian configuration management sy
ii fileutils 5.97-5 The GNU file management utilities
linux-image-2.6.17.11-kanotix-2 recommends no packages.
-- debconf information:
linux-image-2.6.17.11-kanotix-2/preinst/failed-to-move-modules-2.6.17.11-kanotix-2:
linux-image-2.6.17.11-kanotix-2/prerm/would-invalidate-boot-loader-2.6.17.11-kanotix-2:
true
linux-image-2.6.17.11-kanotix-2/postinst/depmod-error-2.6.17.11-kanotix-2:
false
linux-image-2.6.17.11-kanotix-2/preinst/abort-install-2.6.17.11-kanotix-2:
linux-image-2.6.17.11-kanotix-2/preinst/initrd-2.6.17.11-kanotix-2:
linux-image-2.6.17.11-kanotix-2/postinst/create-kimage-link-2.6.17.11-kanotix-2:
true
linux-image-2.6.17.11-kanotix-2/postinst/old-initrd-link-2.6.17.11-kanotix-2:
true
linux-image-2.6.17.11-kanotix-2/prerm/removing-running-kernel-2.6.17.11-kanotix-2:
true
linux-image-2.6.17.11-kanotix-2/preinst/lilo-has-ramdisk:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.17.11-kanotix-2/preinst/already-running-this-2.6.17.11-kanotix-2:
linux-image-2.6.17.11-kanotix-2/postinst/bootloader-test-error-2.6.17.11-kanotix-2:
linux-image-2.6.17.11-kanotix-2/postinst/kimage-is-a-directory:
linux-image-2.6.17.11-kanotix-2/preinst/abort-overwrite-2.6.17.11-kanotix-2:
linux-image-2.6.17.11-kanotix-2/preinst/lilo-initrd-2.6.17.11-kanotix-2: true
linux-image-2.6.17.11-kanotix-2/postinst/depmod-error-initrd-2.6.17.11-kanotix-2:
false
linux-image-2.6.17.11-kanotix-2/preinst/bootloader-initrd-2.6.17.11-kanotix-2:
true
linux-image-2.6.17.11-kanotix-2/preinst/overwriting-modules-2.6.17.11-kanotix-2:
true
linux-image-2.6.17.11-kanotix-2/preinst/elilo-initrd-2.6.17.11-kanotix-2: true
linux-image-2.6.17.11-kanotix-2/postinst/old-system-map-link-2.6.17.11-kanotix-2:
true
linux-image-2.6.17.11-kanotix-2/postinst/old-dir-initrd-link-2.6.17.11-kanotix-2:
true
linux-image-2.6.17.11-kanotix-2/postinst/bootloader-error-2.6.17.11-kanotix-2:
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
